My dear Jeff, I want to thank you enormously for your modesty and friendship. I really admire you as a person and also all of your exhibitions. Greeting from your mexican brother, Simon.! best regards

I owe my C3D Knowledge to you JEFF! I slept, eat and woke up to your videos during those early days. Now when I am working and I run into issues I ask, "What would Jeff do?" I always find answers. I know the journey has only began but thank you Jeff!

Today I learned something very helpful. Thank you mr. Bartels for your work!

This video should be used for a model of how to do CAD tutorials. Good scope, efficient but thorough description, perfect length. Thanks.

@JeffBartelsCAD

2 жыл бұрын

Wow, thanks!

@internationalgolfconstruction

2 жыл бұрын

Is it possible to create an assembly daylight that fills to existing grade where the filled in area drains to the road? Alternatively could this be done with grading groups? I tried entering a negative fill slope but no go.

I keep coming back to this video every now and then. And it's the same client that gets me coming back here to answer the age old question: how was that done again?

I just want to say thank you so very much for this information. I had to find a way to show on a Wetland Impact Map a line representing the OHW , Ordinary High Water Level of a 2 year event for a small creek adjacent to my design service road. This worked perfectly for that application to show the limit of this HEC-RAS data. I can't thank you enough and Autodesk for making Civil 3D powerful enough to make this all work. Best Regards, B-man

@JeffBartelsCAD

5 жыл бұрын

Thank you so much for the kind words! I'm glad to hear the recordings have been helpful!

Very nice video! Thanks Jeff

Wow, great application. Thank you, Mr. Bartels.

@JeffBartelsCAD

5 ай бұрын

You are very welcome

Very useful,Thanks Jeff

Great video! Very easy to follow and very useful. thank you :)

Awesome stuff Jeff. Another great tutorial.

@JeffBartelsCAD

3 жыл бұрын

Glad you liked it!

Thanks Master like always was so useful

...this is so much simpler than what I do! I would run a volume surface between the two tin surfaces, then extract out the 0 elevation, and that would be my delineation. This will save me a few steps!

@JeffBartelsCAD

3 жыл бұрын

Perfect! Thank you Adam, so glad to hear the information was helpful!

I would always use a user defined contour but would have to use more than one contour since the flood elevation changed from upstream a culvert to downstream. Great tip!

You tha man Jeff!

Very very helpful tip

Thanks Jeff

Nice video, thanks.

@JeffBartelsCAD

4 жыл бұрын

Glad to hear the recording was helpful!

as always helps ur tutorials...

@JeffBartelsCAD

3 жыл бұрын

Glad you like them!

Thank you very much

Very good

Regards from Dominican Republic Jeff.

@JeffBartelsCAD

4 жыл бұрын

Thank you!

there should be MORE likes on this video!

muy buena info

Thanks for the Video Jeff, Very informative as always. I first found Simon's Video and I got the idea but my Spanish is a bit rusty and Google suggested yours that was great. But the reason I was looking at "Intersecting Surfaces is I'd like to create a "Result" surface kind of like Paste one on top of each other but when Paste the Top surface takes predominance within the extends of it. I'd like the result surface to show only terrain with lower comparison levels(I am not sure if this make any sense ) If I use Paste command the surface that's on top tier take predominance, but my aim is at that Polyline of Intersection the next surface that has lower elevation points to show. Kind of like solids Intersect command ? Is it possible, or there is workaround way to do it? I have a design pad, that have Cut and Fill sections, The Civil Engineer design states that within the Cut area extra 1m would be excavated and replaced by EngFill, but in the Fill Area of the pad 2m Below NGL to be replaces by Engineering fill. I have Copy of FL surface lowered by1m, and NGL surface lowered by 2m. I want to combine them along that "Intersection Line" I created watching your video. The result surface will produce an Excavation Horizon that I will use to calculate EngFill volume. Thank to anyone that might help me? Thanks Nick

sir, how can grading distance give (along section) slope

Hello sir . how can I get this image on work place And also how boundaries created here? pls guide me sir.am wait fr ur reply

Jeff, is there anyway to offset a 3d polyline in Civil 3D 2017? Thanks for the great vids!

@Hypnotical86

7 жыл бұрын

From Ribbon- Modify tab-Edit Geometry and select Stepped Offset or just type OFFSETFEATURE in command line.

@Steve_Just_Steve

7 жыл бұрын

ok. stepped offset, I guess I've only tried the regular offset in modify because it always errors that this object cannot be offset unless its 2D. Thank you. Since I've got ya, if I may ask you to educate me on one more thing..... Is there a way to select a point and inquire what point group it is in? It doesn't seem to be displayed anywhere in the properties, which surprises me. Thanks again for your time. Much appreciated.

@Hypnotical86

7 жыл бұрын

You welcome! For more information about point (and any other object) you can use LIST command. If you select point and start LIST command you will see "Primary point group" of selected point.

@Steve_Just_Steve

7 жыл бұрын

Your awesome! I remember that command from way back in Map 2000 now, I guess I just had forgot about it. I model in TBC, so I don't use AutoCAD as much as I used to, mainly just to extract and export now. Very much appreciate your time good sir.

@Steve_Just_Steve

7 жыл бұрын

+Deyan Last one I promise! Would you happen to know how to show the GPS height of a point, not the elev. It shows the Lat and Long but not Height.... Been wondering this for a while and could really use it today. I have searched online a couple times, but haven't had any luck.... Kinda more of a survey question, but thought I've give it shot. Thanks again D!

I am late to the party, but great video!!

@JeffBartelsCAD

3 жыл бұрын

No worries! Thank you for your support!

WARD

Great video! Very easy to follow and very useful. thank you :)

@JeffBartelsCAD

6 жыл бұрын

Thank you so much for your support!