I've read the post in the forum you are referring to but it was nice to see it on the video. Thx

thank you! so simple with your explanation ;)

Thanks for sharing!

Could you leave the wire where it is in #6 and make a jumper from there to #8 with the correct pin to use the torch either way? (Hand or Machine)

@cameronschwartz

Жыл бұрын

I’m not certain on that one. My machine came with a standard torch and a gouging torch so I didn’t have to worry about it.

@01Alexsimps

Жыл бұрын

Tony this is my plan maybe with some switches. I need to get the old pin out and try to figure out where to get an identical one for the #8 hole.

This is exactly what I was looking for. I up in the air about buying the 45xp with 2 torches and make the 15 * like this to hook to my cnc and be still able to use the other torch for hand cutting!! Or by the 45xp with a machine torch which is close to the same price as this set up but you only get 1 torch! Sounds like this is the way to go! Did your machine come with a connector for the cpc port or do you have to buy that separately?

@cameronschwartz

Жыл бұрын

Need to buy the cpc connector separately

I think i broke the Jonard Tools R-5926 i think the tube slid in, pin does not seem to release no matter how hard i push...

Great video! Do you use the machine torch consumables or just the regular hand torch consumables?

@cameronschwartz

2 жыл бұрын

Hand torch.

@dave7203

2 жыл бұрын

@@cameronschwartz Just received my Crossfire with THC and I'm on the verge of purchasing my 45xp. Do I need ohmic sensing consumables?

@cameronschwartz

2 жыл бұрын

@@dave7203 regular consumables. Same as hand cutting EXCEPT the shield. You can any to get Mechanized shield instead of drag shield. Don’t use the drag shield, it will destroy your consumables . U will get a manual with the plasma cutter and it lays out the consumables needed really well and had cut charts. The only setting you will differ on is pierce delay. U and a couple fractions of a second to the pierce delay Consumables regular 220817 220854 220941- bulk pack 228765 220842 - bulk pack 228767 220857

Hey brother could you help I have a hyperthermia 1650 and I want to do the same thing but the wires are not going In the nozzle is a built complete torch

Is there also any way to straighten the torch in addition to rewiring it? aka to the "pencil" style?

@cameronschwartz

Жыл бұрын

No I would need to buy a machine torch if u want straight up and down orientation.

@design8studio

Жыл бұрын

@@cameronschwartz Thanks. I had already bought a pencil style machine torch!

So without the cnc port you still need to hard wire correct? Thanks

@cameronschwartz

3 жыл бұрын

Without CNC port you do need to hard wire to your plasma cutter. If you get a hypertherm 45xp without the CNC port you can easily add one to it and it would probably be less work or about the same as hard wiring. The mod in this video is only for the hand torch also. If you get a machine torch this mod is not needed.

@Issac_G

3 жыл бұрын

@@cameronschwartz appreciate it man , I was thinking of getting the port add on but might wait until I get a machine torch, but running a hand torch I didn’t want to have to slice wires inside the cutter to void a warranty. I’ll keep looking into this, just getting mixed answers