Great information! I’ll be revisiting this vid once my stock tires are toast!

@maganamfg

2 жыл бұрын

My pleasure man, check out the comment for some specs that are known to fit!

@rmoseley901

2 жыл бұрын

Thanks 🙏🏻

Badass!! Currently on T7 TS5 18x9.5 45 275/35 ADVAN V601 on Swifts and no fender modifications yet. Only rubs a tiny bit on really really big dips or bumps 🤙🏼

@maganamfg

2 жыл бұрын

Same if I am not on R mode

@devontaewilliams4550

Жыл бұрын

Same fitment but running Ze40s

I’m about to run 265/40/18 +38. After watching this I think I should be good. I’m not lowered and I don’t plan on it until I get those plug and play rsr coil overs.

@maganamfg

Жыл бұрын

You should be fine at stock height!

I got 18 9.5 45 off set titans great fitment

Solid vid man Im going 18x10.5 to get a 305 on there Still trying to dial in the offset to keep it from rubbing lol But the hot setup was 305 front/275 rear Im staying stock height 4x4 so it should be a little easier

@maganamfg

2 жыл бұрын

lol facts 10.5 with a 305 do look pretty good especially for grip

@rmoseley901

2 жыл бұрын

JSR runs 305 in the front ask them what offset they have

@TheFK8Life

2 жыл бұрын

@@rmoseley901 They have the stig spec which is 10.7 ...there is a "god spec" floating around which are volks in 10.5 and has a little more room compared to the old stig spec Titan 7s Jake is getting back to me on Titan 7 making them in 10.5 for us to run stock fender no inner trimming. Im 4x4 spec so it should be a little easier for me

Awesome video! Currently been debating on getting Swift springs but with my current wheel setup I'm not sure if I'll rub. Currently on 18x8.5 35 offset with Michelin Sport A/S 255/40. Stock cambers and ideally no modifications (cutting, etc). What are your thoughts?

@maganamfg

Жыл бұрын

I had 18x8.5 +40 with 265 tires I never rub. Having 255 you won’t rub with swift springs. If interested in a set of springs message me on instagram to place an order via my website. Thanks

I’m on 255/40/18 with 9.5+45. Lowered an inch all around. I had 265/35 but had horrible mpg and the Speedo was of. With 255/40 Speedo is correct and way better mpg and also more comfortable but I do rub in the rear. Currently doing research on where and how to trim but I can’t find any thing good. I only rub in one spot and I don’t want to trim because I’m scared it’ll cut my tire and I also don’t want to trim the whole fender because that’s where the wide body flare hangs on to. I also installed camber arms because my 265/35s were done from the inside in only 33k miles but the outer half was still more than half.

@maganamfg

11 ай бұрын

That’s odd you are now having issues with rubbing, it mostly has to do with a taller tire. Next time jack the car you will see where it’s rubbing (probably on the metal side) near the outer tire. Is it only when you go over bumps? Also does it happen on R mode?

Link to the video where you bend the tabs to fit the 265s?

The blue type r what kind of grill cover was that?

hey very informative video! i was wondering how bad is the rubbing with 18x9.5 + 38 275/35/18? im on the edge about 265 and 275

@maganamfg

Жыл бұрын

I have that same setup with 265. I have ran 3 different 265 and all were different width. Ao52 I did rub a lot more than the other tires. So take that in consideration when ppl say a 275 fits. A 200TW 265 is much wider than some 275 tire. A 275 will need for sure fenders cut. A 265 may just need the front fender bent tab.

Great info man. Thank you. Want to get your recommendation. I don't intend to lower my fk8 nor want to get camber kit for it if I don't have to. Fk8 bone stock and intend to keep it that way. All I want is 18 inch volks without any rubbing and don't want to make any modification like fender rolling or trimming. What's the safest way? 18.95+45 tire size 255/40r18 (same diameter as stock) or 265/35r18? I don't want any chance of rubbing even when car is fully loaded. I don't mind if wheels spoke out a little.

@maganamfg

2 жыл бұрын

With +45 you will not poke out. 265/35 offering more grip

@Juan1985g

2 жыл бұрын

@MaganaMFG thank you for the response. So at stock height, 18x9.5+45. 265/35r18, no chance of rubbing or need to modify or trim anything right?

@maganamfg

2 жыл бұрын

@@Juan1985g no need for modifications for stock height 💪

@PaxiFixi

Жыл бұрын

@@Juan1985g Hey man, im looking do the same thing, 18x9.5+45. 265/35r18. What are your thoughts on them if you have them installed?

Can you talk more about the Federals? Thinking about a budget set up for my CTR. Thinking Super Speed wheels (not sure exactly what design yet) 18x9.5 et38 and Federal 595 RS-RR 265/35. Have heard they run extremely wide and even recall a guy on the forums running a 255/35 which still looked meaty, so would definitely consider that if need be. Will also be lowered on Swift springs. The car is a daily so will see rain, can the Federals be driven in the rain (safely)? They seem R888’ish which I’ve heard are downright scary in the wet. Thanks man!

@maganamfg

2 ай бұрын

I use to have federal RSRR Pros on my fk8, 265/35 they do run wide but not as wide as RE71rs or A052. They may rub in the back if car is loaded with stuff. For the rain both my s2k and Fk8 have had them and at least here in California for freeway driving I felt comfortable at 60mphs. I wouldn’t drive them if I knew my streets gets a lot of stagnant water or heavy puddles. Hope this helps!

@importraceramimportraceam1756

2 ай бұрын

@@maganamfg Awesome, I greatly appreciate the reply man. Worst case I can always have the shop that I go to “trim” the rear fenders but apparently, per your video, that isn’t necessarily a simple process like rolling a fender. You have to know what you’re doing from the sounds of it.

@maganamfg

2 ай бұрын

I mean anyone can chop it up, the hard part imo is sealing it so water doesn’t go behind the skin.

235 45 18 conti tires, titans td6 wheel 18,9 5 45 off set stock hight no issues at all on my 17 type r for 5 years with it brand new with 71k miles on it

@maganamfg

Жыл бұрын

Nice brother!!!!

@speedisf

Жыл бұрын

@@maganamfg thanks bro

What about 18x9.5 +22 with 215/40/18 tires with spoon springs minimal drop?

@maganamfg

23 күн бұрын

spoon springs don’t drop enough and 215s are pretty skinny for 9.5 so should be fine. rim will poke, tire will be fine

Just ordered myself some JR SL01 19x8.5 et37 wrapped in some 265/35 Nankang AR1s. Still on stock suspension but worried about rubbing 🤷🏻‍♂️

@maganamfg

2 жыл бұрын

Should be fine, as long clears the BBK. Let me know how it looks once installed never heard of those wheels till now lol

@averagepal572

2 жыл бұрын

@@maganamfg Japan racing wheels are like a cheaper alternative, but still quality. I just don't fancy wrecking a set of forged titans on all the potholes here in the UK. Follow me on insta if you'd like 👍🏻

@rmoseley901

2 жыл бұрын

You should be good to send it on those

@averagepal572

2 жыл бұрын

@@rmoseley901 getting fitted tomorrow and I'll add some photos to my ig

@memo-mn8yn

Жыл бұрын

Whats your ig? Im looking for wheels for my R and exploring all options

Do you rub at all with passengers in the back with your current wheel specs?

@maganamfg

2 жыл бұрын

No rubbing due to rear fenders cut. If you didn’t cut them yes they would.

Would running 18x8 +35 cause any issues with rubbing or with the brembos?

@maganamfg

2 жыл бұрын

I ran Rpf1s 18x8 +40 and had no issues on 265 tires. If you go +35 I’d say don’t go more than a 255 width. It all depends on your rim spoke design, worse case can add a 5/10mm spacer.

would some konig neoform rims sized 18x9.5 with an OFFSET of 35 rub my fk8? Tire size I wanna go with is 255 40 R18 / stock height

@maganamfg

11 ай бұрын

You will be perfectly fine at stock height on 255.

At stock height what do you recommend to run with on 18” rims?

@maganamfg

10 ай бұрын

You can do 265/35 or 275

I’m getting 18x 9.5 +38 and would like to go with 265 35 18 at stock height , any rubbing or modifications?

@maganamfg

Жыл бұрын

Won’t have issues at all.

@federico12329

Жыл бұрын

Thanks PK ! Just added u on ig!

Just about to get my first ever set of alloys. Don't laugh... Lots to learn but Ive ordered 18inch 9.5 rims.. +45 offset As for tires. I don't want any rub and I'm staying stock springs dampers. Will a R18 255 40 Michelin Pro sport 4 fit ? Really don't want to cut it mod anything

@maganamfg

Жыл бұрын

Yes with +45 not a problem

@russc5269

Жыл бұрын

@@maganamfg cheers 👍

@taki38

Ай бұрын

You can lower easily

I have a 19x9.5+35 with 255/35 Would i rub on swift springs?

@maganamfg

9 ай бұрын

With the 255 tire, you shouldn’t have any issues. Rear camber arms are recommended to reduce camber wear on tire. Feel free message on IG @maganamfg like to buy a set of arms.

Would 19" 8.5 et35 with a 255 35 19 on stock hight be ok

@maganamfg

Жыл бұрын

Yes it should, 8.5 is not as aggressive so a 255 should easily fit

I want to run 275/35/18 I’m on swift springs ? What u recommend

@maganamfg

4 ай бұрын

+45 offset with camber kit in front and rear should easily.

@DaSpeedboi

4 ай бұрын

@@maganamfg with 265s I wouldn’t need the chamber kit huh

@maganamfg

3 ай бұрын

What offset wheels?

Will 18x9.5 +38 265/35/18 with swifts be fine ?

@maganamfg

Жыл бұрын

Yes, this is currently what I am running. When I was on A052 my rear would rub at high speeds. (My rear fenders are not rolled/cut). I am currently on Firehawks 265, no rubbing at all.

I have 18x9.5 +40 with 265/35 will I rub with swift springs?

@maganamfg

Жыл бұрын

I have +38 and rubbed at first without bending front fender tab. What tire brand? For example a firehawk is skinnier than an A052 tire. Michelin tend to be skinny also

@ashgrove07

Жыл бұрын

@@maganamfg Falken azenis 510, or Hankook v12

@maganamfg

Жыл бұрын

@@ashgrove07 they both are narrow you probably will rub on minor dips in front. You can easily fix by bending front tabs

is the aegean blue car stock height?

@maganamfg

Жыл бұрын

Hello, he was on eibach pro kit

Where is Mr Sexy located? I would like to get this done. Do you happen to know his email? I don't have IG

@maganamfg

2 жыл бұрын

He is located in Chino area / west IE area. Will find him on instagram as MRSEXYS2K