Jason, you are a magician and a real gem. I've been absolutely blown away by a couple of your videos. Easiest decision I've made to buy your formula. Thanks for sharing the genius at a low and very worthwhile price. I have been watching all the guides showing different ways to make a paint, and none of them have worked for me.

Jason you are a wealth of knowledge. Thank you so much for sharing everything with us.

Thank you for the formula. I just purchased it. I was actually going to try and come up with a solution like this, and I never would have come to this

This is very helpful. I just started electroforming and in the past 24hrs have spilled my little conductive pot twice (in different locations). Thought there has to be a (better) recipe somewhere and came across this video....and now have purchased 3 of your instructional videos.

Just placed my order yesterday and I'm so looking forward to using it. I'm really interested in the detail you're able to capture. In other lessons I've seen, the paint was thick and needed 2 (or more) coats. With brushing it on, waiting time and losing a lot of the detail, the results looked ok, but nothing like what you've shown in the demo. It's worth it just for time saved alone....was searching a long time for a thinner paint formula. For anyone hesitating because of materials and availability - I can order them no problem from Canada (for the conductive paint formula). Thanks so much for sharing what you've learned, hopefully it leads to a lot of fabulous possibilities! = )

@evelynwightman7773

4 жыл бұрын

Thanks, I was wondering exactly that as a Canadian

@kleber869

4 жыл бұрын

hello friend, I'm from Brazil and I can't get an efficient formula for conductive paint, could you help me ?? thank you

Just made my own, thanks for the info

Thanks for all of your information. The new recipe sounds great!

Thanks for all the information man! I purchased this recipe and have emailed you questions a few times with no response. 1st... no pre-sealing necessary anymore if using this recipe with organics right? 2nd... can you advise amounts of the bonding for strengthening an object? Insects, leaves and such come out too delicate after plating for me to work with. Thanks!

You're the man, Jason! Thank you

Hello Jason, just purchased your formula recipe and cannot wait to try this! Thank you for your generous wisdom on electroforming i'm really enjoying it so far but there are some kinks I need to fix and hopefully this will help improve things. Great videos thanks

Keep in mind, when reading high resistances, holding the leads to the item with your fingers produces a false reading, because you are conductive. Were it otherwise, lightening would not be a danger to you.

Your conductivity measurements and comparisons would be much more accurate if you maintained a consistent distance between the meter probes.

Thanks for your great help. Please accept my purchase as gratitude for your work and information .. all the best.

I love it 🥰 Thank you for sharing with me ❤️🤟🏻💋

does this recipe come in your electroforming for begginners book? Thank you so much for all your amazing videos of knowledge.

I'm hoping to get your formula to be airbrushable! Thanks for sharing!

You should try water based grout sealer and graphite 50/50. On highly porous items just seal first with grout sealer. Took me years to discover it. My gold roses are perfect.

@kellyvcraig

5 жыл бұрын

Thanks. Always looking for tips and tricks.

@deweycutie

3 жыл бұрын

So seal first with grout sealer then cover with grout sealer and graphite?

@brunoburtoni8479

17 күн бұрын

How is the hardness ? And adhesive strength , flaking peeling after polishing?

Beautiful work. Fantastic!

Thanks a Jason , another answer to my question ❤🔥🙏

Made recipe purchase 7-12-22 1:15 p. est. I am currently waiting for recipe to show up. Certainly very hopefully this works as well as you have shown. Thank you.

Will buy tomorrow! Thanks so much!

Bought it... love it!

Are the ingredients easy to find/source? So if I buy it I’m in USA.

Jason, I purchased the directions April 2,2022 through PayPal. I just found the material in the UK. Now I can’t find your directions.

I'm trying to find a way to create a pitted surface that I can then copper plate. Was thinking of putting salt in the conductive paint then when dry lightly sanding the surface to expose the salt and then dissolving the salt out with water leaving a pitted surface. The problem is salt dissolves in one of the components of your conductive paint. Any suggestions on what I could replace that component with?

Hello, I am considering buying the formula; are the materials listed as chemicals? I don't live in the US, so any branded items listed as ingredients I may not have access to.

@AdithyaReddy15

4 жыл бұрын

the key material is actually a branded chamical. luckily I was able to successfully replace it with generic PMMA fro my purpose.

@troebeliewoep

4 жыл бұрын

Thanks for asking, I also cannot get brand items. Sadly many diy plating solutions also ask for things like “root kill” or something. Doesnt exist here =\

@AdithyaReddy15

4 жыл бұрын

@@troebeliewoep root kill is basicy copper sulphate which is easy available is every country. Just look around a bit

@kleber869

4 жыл бұрын

@@AdithyaReddy15 hello, could you sell me the conductive paint formula ?? i'm from brazil and i can't find an efficient conductive paint in my country. thank you

After your electroplating, is it durable? I want to make electrodes from 3d prints to cut steel using ECM.

where do I buy this recipie... I want to do flowers,

Are the ingredients readily available in the UK? No point in buying the recipe if I can't use it.

Would graphite spray work as well?

Jason, did you know that Costco sells latex gloves? You should consider buying and using them. You never know the long term effects of these chemicals.

I purchased it and followed the recipe but both types came out really thick. I just added more acetone to thin it out.

Hi, how much cost the ingredients for your formula approximately?

Jason I appreciate the effort you put into sharing this information. I have purchased several of your information packs on First Density Materials and have a few questions which I have sent to First Density Materials and yourself personally and it’s over 2 weeks now with no reply so I would appreciate a response please. Also the main ingredient in the conductive paint is not easy to get here in Australia, have you considered selling it thru FDM? Thanks Ian

@kleber869

4 жыл бұрын

hello, I'm from Brazil, and I'm having trouble preparing an efficient conductive paint, could you help me with some formula please. thank you

@ianbottom7396

4 жыл бұрын

Kleber Pereira Jason’s formula recipes can be purchased here... www.firstdensitymaterial.com/collections/recipes-for-electroforming

Is this recipe in the printed electroforming book I just purchased?

Great video and good product . Worked well for me also had success myself with the same solvent as you but a different plastic polymer. Keep up the great work. Maybe a glycol brightener solution ;-)

@kleber869

4 жыл бұрын

hello, could you sell me the conductive paint formula ?? i'm from brazil and i can't find an efficient conductive paint in my country. thank you

@clarissauhlendorff4716

4 ай бұрын

​@@kleber869 vc achou alguma tinta condutiva que funcione? Os produtos do Jason conseguimos achar no Brasil?

@kleber869

4 ай бұрын

@@clarissauhlendorff4716 olá, encontrei uma tinta boa, me deu um ótimo resultado.

Hello, Jason! I wish to purchase ur recipe of this solution and brighter as well, but I’m wondering will I be able to get ingredients in Malaysia? It is smth that can purchase on aliexpress for example?

What is tha binding agent ?

Hi Jashon, I Love Trees, and find it amassing

Lol “it’s a little tiny flower thing,” it’s most likely Queen Anne’s lace, also known as wild carrot because it’s roots are actually carrots! It does have some look-alikes, and I can’t tell from this video, but mostly Queen Anne’s lace (:

Jason can you do this on gun part and will it last and stick good. Like metal and plastic parts thanks

I bought this recipe but for some reason mine comes out really thick. I’ve tried it numerous times and when I dip anything in it, it comes out goopy. Can someone please help me figure out what I’m doing wrong?

Why don't you offer this pre-made? Thx.

Hello, I find your videos very informative and have thought about purchasing your recipe. Does this work on silver? Thanks.

Bought the recipe but my paint turned out extremely thick and cracks up when drying. I made the first ratio (4 to 6) but when I dipped, it globs up and doesnt dry evenly. Any tips?

Hello - thank you for your videos - I wanted to ask: Do you have to seal the leaves before applying this paint? Thank you!

Is this in the link the instruction to make It or the product already made?

I bought the formula but wasn’t able to buy that ingredient yet and wanted to go back today and now can’t find the website that I was on and that name .. how can I find it without having to purchase the formula again?

I purchased this andcant open file can you help me?

Tks for the offer, but, the chemicals used are "normal"? i'd like to get it, but, any idea about to get the components outside USA?

@AdithyaReddy15

4 жыл бұрын

generic PMMA worked for me, instead of the branded chemical Jason used.

So im suuuuper new to this. I had a kit long ago, but sold it. Do you have a tutorial on supplies or bare necessities?

Hi Jason, been following you and learning from you for years. I’m finally able to put it to use. How do I go about purchasing the organic materials conductive formula? Your current link seems to not be working.

Been doing this as a hobby project, because I'm bored. I'm having trouble getting an even plate (using vinegar + copper for copper plating), and even to build up any thickness at all. Any hints how to improve this ?

If you’re selling something, you need to answer questions.

@billbarrett582

2 жыл бұрын

Is he not answering his emails?

How do I purchase?

dear friend I just purchased it, i would like to know howmany time may i have to let organic pices inside cooper. thanks!!

Awesome I just purchased two recipes

Dude your a local person , do you give classes I’ll pay and attend anyway you think ! That is so cool !Duval ❤️

Very cool!

I bought the beginner's class, is this recipe included?

A Cheapy multimeter död not show correct values below 20 ohms. Calculate the resistance of the copper and the aluminium and see what you get

Too bad the one ingredient is very difficult to find, and an expensive magnetic stirrer is required.

Is it cheap to make? Like $10 per gallon

could you do this on plastic

Hi Jason, i tried your solution on PLA 3d printed parts but they kept coming out black with little copper adhering to the surface. Any ideas?

@merler1841

5 жыл бұрын

Message him directly you'll get very quick responses.

Hi Jason, I would like to buy your formula but would the ingredients be readily available here in the UK?

@NickSpirov

5 жыл бұрын

yes, the ingredients are available on ebay.co.uk.

Hello, Can you please tell me with what liquid can I mix graphite powder for application to a plant?

@MrAlexgiu

2 жыл бұрын

He sells the recipe for 10USD

Your plating looks so bright are you using brightener, or for delicate electroforming are you using a fresh bath .. thanks

@JasonWelsh

5 жыл бұрын

With organics you need brightener because you would have a hard time tumbling.

Jason, .. I'm from the UK and was wondering if I can get the formulas you offer for these conductive paints in the UK? ... Sometimes I watch videos from America and can't get hold of the formulas. I love your video's by the way, very educational and your very good at what you do. Thanks for keeping us all amused by your art work and look forward to your reply. Thanks mate ;-)

Hi there! Do you sell your paint or just the formula?

Where do I buy some please

Thank you

Hi Jason! I've purchase the conductive paint recipe. I've sented you a pm on facebook for questions about, but I think you have not see it yet!

I am absolutely interested in purchasing the formula, but may I get the ingredients here in germany?

@troebeliewoep

4 жыл бұрын

Did you ever find out?

@nessa382mucc

4 жыл бұрын

@@troebeliewoep yes, I got everything

Can "ZEP Commercial Acidic Toilet Bowl Cleaner" as sulfuric acid for mixture with distilled water and root killer?

@JasonWelsh

5 жыл бұрын

Rooto works good and has been tested many times by home chemists for purity. I would search the purity of Zep before using it.

@kellyvcraig

5 жыл бұрын

I am using sulfuric acid sold for unclogging a plumbing plug now so, if the same, yes.

I love all your videos. I have watched them several times. I just purchased the organic solution. I am having trouble electroforming kale. I dried it, modpoge it and painted it with graphite. Would not plate the whole leaf. Did plate the edges. The plating was dark. Any tips?

But if you leave all the moisture trapped in the plant, like the succulent, I would expect internal mold or bacterial rot or degradation

@TerraMined

3 жыл бұрын

If your plate is sufficient, you can use a torch to burn the insides if you're concerned about that. There's a video on youtube of someone doing blackberry like that.

Since you're a bit mad (i.e., mad scientist), I'll share my "I don't know what the heck I'm doing, but I'll try it" experiment for you to consider: I use a gallon or larger container and don't bother surrounding items with my anode (e.g., copper wire) material. Part of this is because, as stated in the video, it dissolves. This may mean I have to replace the whole thing because it thinned out in the middle of a coil. First, I try to put my anode material in a polypropylene bag, which catches a lot of the debris rolling off the anode and which, otherwise, would settle on the bottom of the tank. For an experiment, I drill about a seventy holes in a sports bottle and filled it with the scraps from my worn anodes. I ran a 6 gauge rod down into the mess and placed the bottle full of copper scraps in the poly bag. It works, but still eats at the 6 gauge wire too, but I just push it in farther until I have to chop it up and make it part of the scrap collection. I replace it with a new rod, but I only have to have one long enough enough to go to the bottom of the bottle and to project up out of the solution, so I can attach a lead to it. The lumberjocks woodworking web sight shows some of the wood turnings I've plated using my far from an expert approaches: www.lumberjocks.com/projects/348297 PS I'll be ordering the product of your experiments, if only to contribute to keeping you going.

@kleber869

4 жыл бұрын

hello , I'm from Brazil and I can't get an efficient formula for conductive paint, could you help me ?? thank you

can this paint use with airbrush?

@mastersureal1572

3 жыл бұрын

For large project?

@CuHanhtheOnion

3 жыл бұрын

@@mastersureal1572 just a small hobby painting

Hi Jason, I just purchased the conductive paint recipe via video description link. I provided my cell number for contact instead of email. I only received an order confirmation text, no PDF or link for paint recipe. I emailed you thru your website. Can you pleasr send me the PDF or link to the email provided in that email? I'm really excited and can't wait to make this paint! Thank you!

Hi I purchased your formula, could you please check your e-mail to answer a few questions. thanks