Enjoyed reading the comments. I am the engineer who designed the machine about 11 or 12 years ago. Yes the machine is safe. Yes it is loud. If you use water there is no issue with silicosis. It must be operated in well ventilated areas. It is a diesel so Carbon Monoxide is not a huge issue like gasoline. This operator and company are good at what they do. It is not overkill for the Blade size. This machine actually had an even larger blade.of 60" diameter.

@suphx

8 жыл бұрын

A blade that size is at least $2,000. Possibly more depending on the type of blade. You have some blades where the diamonds are bonded a certain way to deal with excessive rebar. And a few other types. They're super pricey.

@sqrlzxbigxnut2018

7 жыл бұрын

Pretty funny people commenting who have no idea about concrete cutting.

@richyalf

7 жыл бұрын

Are the blades disposable?

@georgethomas5057

7 жыл бұрын

Donald Meister This is a awesome machine.Can i know upto what depth it cuts.Am in demolishing biz.Thanks.

@robertking3130

6 жыл бұрын

Can you slice cheese witit?

This is like watching the first ten minutes of final destination

You should not be at cutting speed until that blade is in the cut line. Once you lower the blade a couple inches in the cut line you can increase speed to what ever it is you want it at. And always lower your RPMs when you pull the blade out of cut. This is just for safety reasons but the other reason is your blade is clearly wobbling at the higher RPMs and is cutting or wearing into the water supplies lines inside the blade guard. So lower RMPs until inside cut and lower RPMs when you pullout of cut.

@torijordyn6056

Жыл бұрын

You're sooo right I see what you mean.

So that's how the Egyptians did it...

@jsullivan3736

8 жыл бұрын

+S.V.A.S good point

@RickDirt11

4 жыл бұрын

Have a look at TURKEY and SYRIA and LEBANON too

HOLY SHIT.. I'd hate to see it kick back..

@MrBmxbrawler

7 жыл бұрын

it doesnt kick back. it would jump forward. see the rotation

@15thsquadron01

7 жыл бұрын

No chain.

is he cutting the planet in half???

@chrisjones2364

9 жыл бұрын

It felt like it

@CherrySox

6 жыл бұрын

lol

@Lovetolivetruely

5 жыл бұрын

Sure looks like it....

@johnfoltz8183

3 жыл бұрын

no wonder why there was an earthquake somewhere.

@AlphatecEngineering

3 жыл бұрын

hahahahaha

Finally Chuck Norris's nail clipper sees industrial use.

Good work man, very impressive sir!!!

One of the best jobs a guy can look forward to in the morning....I tell you the truth......

@williewright8787

6 жыл бұрын

chris jones I start tomorrow as a labor any advise you can give me ?

@aldofrausto3819

4 жыл бұрын

@@williewright8787 hey did it go are you still working as a labor? Did you like it?

@xMrFuzZyKitteH

4 жыл бұрын

teach me

@juantorres8401

4 жыл бұрын

@@williewright8787 my advise to any laborer who wants to achieve anything more is to watch everyone around you find who is good at the job you want to do and befriend them. And learn a trade

@JohnAnderson-kt4mb

23 күн бұрын

As well at the end of a job $$$$$, have a good friend that owns a concrete cutting company in the Midwest, union job, lucrative pay, hard work.. cool shit

They don't rent that at Home Depot!

I'd love to get a bunch of blocks like that - maybe thinner (I'm guessing those are over 6" thick by the blade?). Very neat.

I like this machine! Do you think 230/460 vac motor with gearbox can do better? Thanks.

On your Step Cut how many passes did it take to cut threw with that setup? Or with that being so powerful you make the cut in one pass?

And they say not to do it all in one pass! 😂 Now THIS is efficiency!

Finally, something to chop my vegetables with for stew

@chrisjones2364

9 жыл бұрын

👍🍅🍆🍍🍉🍈🍑🍌🍠🍐🍓🍋

laughing at the smoke rings

Gotta love going full depth with a 36 inch blade, it's the only thing that would cut right through the concrete at the airport! 👍👊💪

@tazhillleader

2 жыл бұрын

When I did Dallas Airport we had to spin 48" on final cut. 60" in certain spots that was wild spinning a 60

@suphx

Жыл бұрын

This looks more like a 48” or a 54” sir 🤣 36” is way smaller lol

I've used a cutter like this before but smaller and only had 3ft blade on it and was powered by twin cylinder Wisconsin.

I seen my husband use one of these.. Good Job sir..#onelove

I wonder how long the blades last, im currently doing a large job, with a core cut cc1200 and i have to cut through paver, asphalt and concrete, halfway through and have used up about 5 blades had to stop because the belt snapped, but boy i can imagine when that big ass wears out you hear some real alien noises.

I love the smoke rings

Chuck Norris use this saw to cut his baguette every morning.

Is that husky saw ? We have core cut

lol the sound of water tubes getting shredded gets me every time :D

@kyleschueler7873

Жыл бұрын

Oh you know that sound too? There isn’t many people that do. I run a construction crew doing highway work in Iowa. We use this exact saw everyday except newer

Beautiful machine.

When the concrete cutter you hire is level 99 prestige.

got some balls starting that out of the cut. let alone reved up all the way

В душевой ремонт буду делать, куплю такой плиткарез ! :-)

Was this for demoing the concrete, or cutting 1/4 depth of the slab thickness? Im thinking for removal of concrete, either way its BADASS!

@davidfitzgerald3653

Жыл бұрын

Removal.

great piece of tool

why do you cut this? are you trying to remove floor? in that case custs are not good shaped

I was looking at people using stone saws like the Stihl ts410 with it 12'' blade (which I'm getting) and was quite impressed. But then this beast came up to look at, which I thought was a funny giant joke cartoon thing. But then you fired up its diesel engine and started cutting with that massive blade! I could hardly believe it was real and nearly fell off my chair laughing.

Nice Saw!

How heavy is that thing and do they make a liquid fuel powered model? Gas, propane, alcohol or something similar so you wouldn't need a cord. Also how much electricity does that need? What size generator would you need to power it properly?

@bighit66

8 жыл бұрын

and to answer your other question at least at hour company we have a 60Kpa generator to run the electric saw off 480 3 phase cable

YOOOO!!!! that Vacuum is bad ass. the Vacuums we have, have the vacuum head and a hose and a wonde. Gonna see if we can find these and order the vacuum. lol

I seen that blade come off the saw and it flew about 150-200ft into the corn field. The scariest shit ever. The guy turn albino quick never got his color back.

I would like to know if cutting this DEEP requires a (811 call before you DIG) I think there could be a Gas line underneath the concrete and always keeping in mind it’s all about safety first!

@ricksanchez9669

Жыл бұрын

i do this for a living in Canada. We like to call if theres even a chance we're over lines of any kind. Power lines can be much closer to the surface than you would like.

Can I buy this at Home Depot?

Who makes this machines. whats the model.

how much is it? and how is the deep it could cut?!

вот это я понимаю болгарка :-)

so it's a huge stihl saw then basically?

Big job for big FS!

صحيح مزعجه ..... ولكنها عملية ومختصرة للوقت والجهد.👍

Worked at I.H.C. doing exactly that on the airport runway however in 95degree weather 12hr shifts

where does it sell? is it ready for sell on amazon, alibaba or ebay? plz tell me how to buying it , Iam very interest. Iam come from VietNAm. thanks!

And THAT, my friends, is how you slice a pizza pie!

Hell yeah!

Do those things have a tilt sensor so they the turn off if they fall over or roll down an incline?

@chrisjones2364

8 жыл бұрын

Personally I am not aware of any flat saw equipped with a tilt sensor.

that's the LARGEST concrete saw I ever........uh, seen :D

The other end of the blade just came out through my street in downtown Bangladesh! Wtf Chris who's going to pay for the dirt street you destroyed?

my friend Hugh Jaynus runs a saw like that. he works for Dixie Normus Construction

Damn...just when I thought I ran a big husqvarna saw, I literally see a guy driving one. Yes I would buy this if I had the money, because my manhood is being challenged. Sure I might go to jail for cutting a road in half, but they would probably have to wait until I hopped off of my saw. Not to mention they would have to help me pick up my giant balls I was dragging behind me.

@tttarms1970

3 жыл бұрын

Dont let those balls near that blade....lmao

@Az-ov1ti

5 ай бұрын

Hahaha

The Frankenstein saw.

@chrisjones2364

9 жыл бұрын

I like that description.

which saw is that?

Hell now that is a mans TOOL what a saw :)

@letscook63

6 жыл бұрын

baldfatgit1 I use one

This is God’s own concrete saw...

That’s awesome. Is that a 65” blade?

@tazhillleader

2 жыл бұрын

Looks to be a 60"

Concrete cutter/ gas pipe cutter/ all underground conduits cutter and even main sewage line, holy shits that thing will take you within a mile from the earth's core hahaha

Could you imagine having that thing catch on something and kickback haha... wholly shit.

@chrisjones2364

9 жыл бұрын

Don't even talk about that

@chuck2367

7 жыл бұрын

It runs off of a belt and not direct drive. Of course a big spinning mass could pose issues but if blade gets stuck the belt snaps. Still one cool saw.

@modeldaughters

7 жыл бұрын

Steve Murdock Rock saws tend to be less dangerous than wood saws but a binding blade heats up and dishes - freakin' expensive! Not a good job for those who like to daydream, heh heh...

@luisfeliciano0708

5 жыл бұрын

The machince stalls when that happens.... Automatically shuts off.... Local 57 concrete cutter i see it everyday....

@shawncrisostomi137

5 жыл бұрын

They don’t kick back. I use one every day. The blade would just lock up

it was blowing rings :D

nice vid

нужно такую , только на 22й платформе

When I’m walking down the street and see this I get scared and think of final destination

the smoke rings are funny

when YOU'RE hungover

i can see this thing being on a saw movie set

That is a monster saw. But why go so deep if concrete only seems to be 6"?

As if it wasn't already comically huge, it had. to shoot out smoke rings like a 1920's mickey mouse cartoon.

Now that's how you cut 😇

that is a hell saw!!

Jheeeezzzus... Imagine the kick back loooool

@MrBmxbrawler

7 жыл бұрын

why the hell would it kick back. its not a table saw. it rotates forward

i have the same but if modified tout put a 72 inch blades

I cut concrete too tomorrow I will be cutting 22in thick concrete what is your technique or tip on using big blades Cris jones

@chrisjones2364

8 жыл бұрын

To start I make sure the blades you use to step cut with are in good working order. No cracks at the segment base or the blade as a hole. Check to make sure you saw is in good working order. Now it depends on the machine you use and operator preference. I would start with a 14"-16" .220, this cuts to a 5" depth. Then I would jump to a 30"-36" .187, this cuts to a depth of 12". Now I would like to put on a 48" .165, but that would only cut around 21". If the concrete won't break (wire mesh at the bottom or even rebar not placed 2" to 3" up off the bottom) you will have to use one size bigger blade at least. Probably a 54". This will get you to 24" deep. Use plenty of water to remove spoils from the cut and keep the blade cooled. Always match your blade rpm to the saw or be sure change to the proper gear. Wear all proper PPE. Safety glasses, hearing protection, ect.

@vcadenas1990

8 жыл бұрын

+chris jones thanks am on a 32 in and 36 in blade den am putting 42 in blade. so you think a lot of water is better because I been told if you use to much water u can wash of the sharp to cut on teeths on blade. wat is your Technike to cut a rebar running long way in the cut Cuz I ran into one today

Awesome

what kind of floor do you have to cut that deep is that for driving tanks on

@slicksloth_416

8 жыл бұрын

+Willy G P Most likely a foundation.

@Ptik0bj

8 жыл бұрын

+Willy G P Airport runways are usually too deep for a regular flat saw to cut. And as stated before, foundations in sky scrapers are pretty thick as well

How much. I want to buy it .as much as fast . Is any one know the price of this cutter.

well odne!!!

Thats what you call a circular saw! What HP is it?

@chrisjones2364

8 жыл бұрын

84 HP

@modeldaughters

7 жыл бұрын

chris jones Whoa! I never would have guessed that - serious grudge slaker!

Chew Baby Chew ! 👍

This was used for my circumcision LOL

Can anybody tell what for they cut this? they will use concrete blocks for something? or kind of demolition?

@chrisjones2364

8 жыл бұрын

The concrete blocks were demoed and recycled.

I bet that was $100000

The next part is the best! Pulling trenches! (;

Price?

2:52 неожиданно заклинивает диск )

@user-mx4oz9ue1d

9 жыл бұрын

Иван Драго Ни хуя себе циркулярачка

They should feature this saw in a slasher flick or the next friday the 13th, or nightmare on elm street.

Omg that hurts

That looks safe🤔

WOW!

Do a video on how to use one of those step by step

@BuffaloBrandedOutdoors

4 жыл бұрын

It's not hard at all lmao, I used to cut 1300' a day at 20in deep

Jeg sjerer meg rett jennom veggen jir fan

Yeah!!!!!!

wow

What is the brand of that machine? Where can I get one of those?

@chrisjones2364

9 жыл бұрын

Husqvarna 8400. Olathe KS USA.

@reniumj3

9 жыл бұрын

Thank you very much!!

Holy crap how deep does that thing cut

@JG74M-Wilfried

6 жыл бұрын

El_Ectric guessing that it might be a 48" blade he's likely only cutting 20".

Sunglasses?

What does a blade cost for one of these?

@BuffaloBrandedOutdoors

4 жыл бұрын

A 48" diamond product blade we used to buy for about $800

Boris Badenov requesting when u r done

Привет где такой аппарат ест и сколько стоит.