Complete guide to outfitting a canoe for whitewater
Спорт
In this canoe outfitting video I walk through the process and required materials for installing the following.
-Kneepads
-Thigh straps
-Airbag cages
-Grab handles
-Skid plates
Intro 00:00
Prep 00:23
Adhesive selection 00:58
Anchors and thigh straps 05:03
Knee pads 16:58
Grab handles 21:06
Airbag cages 26:30
Paddle holders 41:45
Skid plates 45:01
Пікірлер: 62
This is the best "how to" video I've seen on any subject. Hats off to you.
@jasonbayens
Жыл бұрын
Thanks!
The best whitewater canoe set up video on KZread.I'm currently setting up a Mad River Caption for the spring. Thanks for sharing.
@jasonbayens
Жыл бұрын
Glad you found it helpful! Hopefully you get some good paddling in soon! That will be a fun boat 🛶
Extremely well done!! Great step by step instructions. Very clear and concise!
@jasonbayens
Ай бұрын
Thanks! Glad you found it helpful!
Thank you ! Cheers from Switzerland 🇨🇭
@jasonbayens
Жыл бұрын
No problem! Hope you found it to be helpful.
I have the exact same boat and wanted to thank you for giving me the confidence to install my float bags..anyhow in case you didn't notice (forgive my lack of proper canoe terms) the black "decking" at each end of the boat has two screws that go through the wooden support..those screw ends are kind of sharp and could puncture a float bag.. I just screwed acorn nuts on the exposed end and problem solved.
@jasonbayens
3 ай бұрын
Glad it helped with outfitting your boat! That’s a good solution to that issue. Mine came with rubber caps on them but the acorn nuts might be a better solution. Happy paddling!
Great video Jason! I’ve saved it to my favorites so I can reference if for my future whitewater (once I get some experience!) :)
@jasonbayens
2 жыл бұрын
Thanks! Hope it helps when it comes time to do some outfitting.
great patience to do it right. wicked boat.
@jasonbayens
Жыл бұрын
Thanks! It is time consuming but it’s also a fun process.
Good info, thanks.
@jasonbayens
10 ай бұрын
Glad you found it useful!
Jason great video ! Iv’e contacted Miley Yee and ordered gear for my NovaCraft Super Nova.
@jasonbayens
Жыл бұрын
Thanks! Happy paddling and outfitting!
Oh man. Those anchors were a very expensive learning experience for me! Lol. I have plans to buy a NovaCraft Supernova next season, and i think i am going to have all of my outfitting professionally done.
@jasonbayens
10 ай бұрын
I’m sure you can manage to do it yourself! Don’t get NovaCraft to do the outfitting. Their factory outfitting is less than spectacular haha
Everything I need to know in one video. Great content! Drilling holes in any boat makes me nervous but seems like the risk is minimal. What are your thought on lacing the entire boat?
@jasonbayens
8 ай бұрын
Thanks! I don’t see a need to lace the whole boat unless you need it to tie down a spray deck or something.
Did you use a kit from Mike Yee outfitting? Or did you mix and match?
@jasonbayens
2 ай бұрын
The majority of it is from Mike Yee.
Very nice. Did you consider foam saddles? I outfitted two canoes, each solo foam saddle. Comfort and good performance, but perhaps I'm missing a good reason for sitting on wood and web.
@jasonbayens
10 ай бұрын
My playboat has a foam saddle but this boat is used for multi week long trips and 10-12hr days on the water. I often switch between kneeling and sitting throughout the day to stay comfortable.
Hi Jason, what sized P clips did you use, I love this set up! 🇬🇧
@jasonbayens
6 ай бұрын
I believe I used 3/8”. Could have gotten away with a bit smaller but wanted to make it easy to lace the cordage through. Glad you like it! It has performed excellent on all its trips.
@nickhindle7289
6 ай бұрын
Thanks for reply mate
How many ml or oz are the bottles of epoxy that you used. I found 118ml bottle but would like to know if I would need more
@jasonbayens
3 ай бұрын
You will need more if you are using it for skid plates. I believe I used about 300ml per skid plate.
Great video. I just got the same package from Mike Yees and will following this as I install it. Where did you get that floating rope for the front? I like that idea.
@jasonbayens
Жыл бұрын
Nice! His kits are great. You can buy floating rope by the meter from MEC. 👍
Planning a trip for this summer and this video is very helpful! Id subscribe but its at 420 right now, heh.
@jasonbayens
3 ай бұрын
Past that number now lol
@SanteeVermont
2 ай бұрын
@@jasonbayens proudly #421! Thanks again for the helpful content
Awesome walkthrough!! Thanks! Plan on using this to outfit my future Esquif Prospectuer. How do you find the weight of the 15? Is it truly 60 pounds? I hear that the 16 is much more than the advertised 65 pounds.
@jasonbayens
10 ай бұрын
Thanks! Mine was 60lbs when i picked it up. I haven’t weighed it since I did the outfitting though to see how much weight I added.
Jay..just watched you and Tosh on his latest whitewater.. nice trip. Question? Why not use a removable yoke?
@jasonbayens
Жыл бұрын
Hi Chris, This is primarily a solo boat for me so I only had to turn the yoke around once. The yoke also provides structural integrity to the hull when bolted in.
Great video, I’m looking to find those P clips. Do you order them off line?
@jasonbayens
10 ай бұрын
Ya I can’t remember exactly where I got them from but it was online. Most electrical supply stores will have them as well. Some people use the plastic ones I just went with the coated stainless cause I figured they would never break.
What size were those p-clips? I’m thinking about using them to creating some “lashing” points for lightweight items near the seats. 3/8” rivets, was that the size of the hole on the p clips?
@jasonbayens
8 ай бұрын
I believe the hole on the clips is 1/4” and it was a 3/16” rivet. 👍
I just bought the same boat and have been researching float bag installs. Is there a reason you went with the clips instead of drilling the hull? It seems like holes are dirt simple, but the clips could pull out. Im a novice, so these are just questions.. thanks
@jasonbayens
3 ай бұрын
Sorry for the late reply. I just find the clips give it a cleaner finish and I hate drilling holes through the side of my boat haha
where did you purchase your materials anchors and pads?
@jasonbayens
10 ай бұрын
Everything was from Mike Yee Outfitting.
What bag/equipment ring and cord are you using for your spare paddle and what line are you using for the grab handles? Thanks !
@jasonbayens
6 ай бұрын
The anchor the spare paddle Is tied to is from mike yee outfitting and it’s just standard 540 paracord tying it in. The grab handles are a sterling rope prusik cord with a 3500lb minimum breaking strength.
What brand anchors did you use?
@jasonbayens
Жыл бұрын
They are from Mike Yee Outfitting. Great guy to deal with!
where can you buy these devices?
@jasonbayens
4 ай бұрын
Which devices? Most of the outfitting is from Mike yes outfitting.
Thigh straps and a kneeling position where most of your lower leg is underneath the seat look like a recipe for entanglement in a capsize.
@jasonbayens
Жыл бұрын
I’ve never had an issue bailing out but I can see why you would be concerned about that. Like everything you should practice and get comfortable with it before you put yourself in a dangerous position. It’s easy to push the straps down off your knees and there is always the quick release buckle on either side.
@thecount1001
Жыл бұрын
easy to get out of if you are familiar with it, practice it and maintain composure in a moving water capsize.
First, you trade it for a kayak
@jasonbayens
8 ай бұрын
I own a few kayaks. I have no interest in trying to do a multi week wilderness whitewater trip in a kayak. A canoe is much better suited to it.
@toddlong8672
8 ай бұрын
@@jasonbayens try and easy rider TSL1 decked canoe, I take it on 2 week coastal trips every summer
FIRST BUY A WHITEWATER BOAT....
@jasonbayens
3 ай бұрын
Haha that definitely helps