Wish Honda could make paint stick that well

@SevagOknayan

3 жыл бұрын

The crows feet on my hood agree with you

@ivanmakarov6315

3 жыл бұрын

😂There paint just flies of from little rocks

@outofmind9222

2 жыл бұрын

No shit especially CBP clear coat for gods sake paint the car to last

@saucysuishi341

2 жыл бұрын

@@SevagOknayan I just took my hood of sanded with wet 400 and wet 600 and with on can of rustoleum high gloss top clear and can looks sexy again. Shop wanted 600. Didn’t need new paint. Mine looked very bad. Also wrap you clear coat can with packing tape around the seem of the can and the cap. So that clear doesn’t build up and drips on the paint like my last coat.🤦‍♂️🤦‍♂️🤦‍♂️

After watching this. I think I am going to just stick it over the old one.

@drivetime1488

4 жыл бұрын

Did you stick it over the old one? Results? Im considering doing that.

@liamwalker6024

4 жыл бұрын

Alberto Ceballos they are meant to stick over them i dont know why he pulls it off just stupid

@scumbagkyler1959

4 жыл бұрын

Alberto Ceballos i did and i hate it you can see the old emblem below if you look at the side

@thurm101

4 жыл бұрын

SCUMBAG KYLER You looking for perfection in a imperfect world. Now it looks nice. Leave it alone. Let’s focus on something else.

@Goldarr1900

3 жыл бұрын

I’ve seen them stick them over the old emblem.. it looked good to me.If you look at the back of the emblem, it’s all covered with sticky tape.. in my personal opinion, it’s made to go on the old emblem. When he removed the old emblem, did you notice that there wasn’t much material for the emblem to stick on strong?

Patric starfish: FIRMLY GRASP IT

😡 FYI: Everyone fail to realize why those emblems are made into that cover. It is a safety measure in case that airbag ever deployed. The force will send that emblem flying directly to your face and possibly put your eye out! I'm just saying!😲

You have to take apart the steering wheel, then disconnect the airbags, then you simply just push out the old badge and replace it.

I did the same thing to my Accord. This is the best way to do it. Makes it flush and fits perfectly 👌🏽

@bsnsjbshsjs5242

2 жыл бұрын

Does your airbag still works?

Hi- Thanks for sharing was it too difficult to remove the studs once you cut the old emblem off? Perhaps using a narrow mouth pliers like the ones electricians use?

thank you for this. I was curious if I could do a sticky one or if I could just pop the old one off. Now to decide which I want to do

you didn't need to undo the fuse, just undo one of the terminals on the battery. then you dont worry about the airbag accidentally going off :)

@duketogo666

Жыл бұрын

You should wait 30 minutes after disconnecting power to let the airbag capacitors or what not discharge.

@Zomby

Жыл бұрын

@@duketogo666 just press in the brake a couple times on any vehicle that has some sort of electronic feature. Will kill the rest of the power

Thanks for the video. It was a big help. iVTEC for life. Lol

good video i have a honda ridgeline with the same chrome badge that is worn out i was looking to remove it and put in the original how would you remove the left over plastic in the mounting holes or is that glue ?

Looks really nice my badge on the steering wheel started flaking off dealer said I had to change the whole steering wheel airbag in order replace the badging. They should have made it replaceable. Now JDM makes on thanksgiving for the post

It also said J’s racing from Japan but it was cheaply made and like I said came cracked and broke as soon as out of the package. Thank you again for any help!!

You can just put the red badge over the existing one.

I used a scrap of black vinyl wrap to cover the worn Honda emblem on my steering wheel. It's holding up fine after a few years and looks good.

The jdm emblems are so nice. I just put one on the steering wheel of my Element.

how long did it last before the sticky wore off??

i USED HEAVY DUTY PLIERS TO PULL H WITH THE WHITE PLUG ON IT WITH NO CUTTING.

I’d like to buy one of these, do you have a link to the site?

you dont need to remove oem emblem thats why the jdm emblem have the mark on the 3mm tape

@GoreDough92

4 жыл бұрын

it wouldnt sit as flush in the steering wheel; notice their's a depression where the emblem sits. Removing the old one allows the new one to sit in snug within that space.

@lordcheka8157

4 жыл бұрын

@@GoreDough92 if the one you purchase have the mark on the tape you will not have any problem

just did my 14 coupe. this was a real pain. forgot the fuse and went after it. mistake. I man handled it out finally. I have debadged cars for 40 years and this one sucked. looks great now though

Just put the new one over the old one fits like a glove

You seen the carbon insert to replace the silver insert on your wheel that would look good with the new emblem

Where did you get that steering wheel cover?

How has this been holding up. I want to do the same with my Toyota steering wheel but im worried it won’t stick long since the oem badge is partially recessed in grooves

That rubber glove isn’t going to protect you at all

@latrll

4 жыл бұрын

Willisthehy SCREAMING

@Algarete-ip2pj

4 жыл бұрын

Willisthehy 🤣🤣🤣

@takcleberry

3 жыл бұрын

@@latrll it doesn’t protect screaming either

@latrll

3 жыл бұрын

@@takcleberry ....you sir are amazing

@jesusantoniorodriguez193

3 жыл бұрын

This kínd of gloves are for clínical use !! He’snt smart guy !!

This is how it's done professionally top notch buddy great finish pal ;)

Will this work for a 2011 CRZ?

I think I might paint my logo black, or get some carbon fiber sticker and cut through it

I remove mine without disabling any fuse or battery does my airbag still work?

What emblem did you get? Because I got one off eBay and it cam broke but the back was not black it was silver.. I heard the one I got was a fake and so I am hoping you can help. Please thank you!!

Does it stick well to it ?

I don't like how much the pleather gets damaged in this process. Ima just scrape the fake chrome off for better adhesion. I could also make a note of where the tabs are and drill into each, shallow and wide. Then a pick might pull the logo right off.

Nice video, would you mind sharing the link to the amazon badge? I mean the one you removed. Thanks!

@carkreeps3261

6 жыл бұрын

Thanks!! Sadly, the oem badge that I removed in this video is not available separately. Your going to have to buy the steering wheel airbag in order to get the oem badge because the oem badge was not meant to be removed. Hope this helps, feel free to message me.

@achwee

6 жыл бұрын

Thanks man! I already bought a regular emblem but I was wondering if it was possible to get the 'rubbery' OEM one somewhere since I couldn't find it. Lovely Kanjo btw, I have a 2007 EXS.

@carkreeps3261

6 жыл бұрын

yea, the rubbery OEM one is the one you can't buy separately. once the rubbery OEM one is removed, there's no going back unless you buy the steering wheel airbag, new or used, because it is riveted on in the inside of the steering wheel airbag (horn)and it is not sold separately from the airbag. That's why you won't find rubbery OEM badge by itself. Even if you found it, I think it would be dangerous and difficult to install it due to the risk having the airbag going off. Nice, I like the 4 doors. Have you modded it?

@musicanoofficial7233

6 жыл бұрын

Martin Espel go to a Honda dealership website, then click parts, it will take you to ehondaparts and you can order everything directly from Honda . They have every oem bolt and piece and they come straight from Japan.

@achwee

6 жыл бұрын

Hey Hey thanks but I'm pretty sure they don't sell that emblem by itself and you have to buy the whole airbag module which is bonkers. I guess I'll have to install a cheap plastic knockoff to replace the original one.

maybe apply tape around the emblem can minimize damages

Thanks for sharing...

Where can I buy a legit Js racing steering wheel emblem? I did this today with one I got from eBay and it didn’t fit.

What about honda accord 2008?

Lol you scared me for a second I thought you was gonna say it will make the air bag go off

@carkreeps3261

5 жыл бұрын

nah, it wont make the airbag go off. I think. sike, it wont trust me

I love Honda's

Looks easy, Video could be shorter.

Why it seems upside down

what is the link to buy these

Noooo! Just stick it over the current emblem. Mine had held flawlessly for 7 of 8 years now.

@DiamondFame

4 жыл бұрын

Andrew Moseley I want to do it like that how does it fit !!! Does it stick out more because it’s over the original emblem

@danielarias8031

4 жыл бұрын

Where can I purchase it?

@dankthrash

4 жыл бұрын

Diamond Makaveli you should do it, it makes no difference at all. it looks even better because it sticks out a little more and makes it POP

@juancarlosracing

3 жыл бұрын

I think just needs to be very clean and maybe warm it up a little bit with a heat gun

Put a couple of layers of duct tape around the badge before the prying, will do less damage

Link for buying this product ?

How did you wrap the leather on your steering wheel?

@averageme3583

5 жыл бұрын

David Seo he removed the oem stitching and wrapped it again 😂

Share the amazon link to buy the emblem

my emblem starting to turn yellow. Ill probably do this soon.

Is it still sticking?

Did you thread your own steering grip as well?

But, can't that emblem mess with the airbag ???

Would that emblem fly off in case airbag deploys?

@guardian8319

2 жыл бұрын

Probably hit you right in the face tbh

@pmatrisotto

Жыл бұрын

probably...that's a safety concern for sure

Kinda wanted to do this, how's the emblem holding up?

@carkreeps3261

5 жыл бұрын

its worth it, its the first thing i see when i get in the car and it adds a nice touch to the car. so far its still sticking and its been toasty over here cuz of the summer and it's still shiny. I'm going to do an update video soon.

Lyze video

Its metal? So what if your airbag deploys? Just metal flying into the face? Im good bro, i hope they have a plastic or rubber one, like the stock.

The chrome started peeling off mine (original one)

@accordlegend2925

4 жыл бұрын

Same and did you remove it?

What if we heat it first with a heat gun... ?

Unless the old one is damaged, I just cant see the point in changing it. ... A shame you cant get one that lights up..lol...THAT would be worth it !! lol

Esse bagulho tá mais seguro que dinheiro em banco.

Or buy an airbag with it already fitted.

This should not have happened in the first place if Honda was still putting quality ahead of the profit margin...If a company doesn't even care enough to make their emblem from quality material what does this more than likely say for the rest of the car. Personally anything made of rubber on my 8th gen has gone bad including window seals, o-rings, roof channels not to mention all the screws are rusting as well as exterior body panels. Shame on you Honda

so, what was wrong with the original emblem? is the red emblem suppose to make the car look like it will go faster?

@lordcheka8157

5 жыл бұрын

It losed the chrome so he replace it but did something bad by remov8ng the oem one something that is nod need it

@nicktills2786

5 жыл бұрын

@@lordcheka8157 I just got.cancer trying decipher wtf you just said

@lordcheka8157

5 жыл бұрын

@@nicktills2786 his stock emblem lose the chrome coat and he decided to replace the logo by removing it something that you dont need to do because the jdm emblem have the mark on the back so you can sitck it

@kerbytheslayer6181

5 жыл бұрын

It adds 200 hp

@Rabiiid

5 жыл бұрын

My civics emblem lost the chrome covering aswell and it looks hideous. I wouldnt change it to red though. Wanna just gdt another one or rather a blacked out one.

You realize that the adhesive was designed to stick to the old emblem. By removing it you reduced the surface area of the adhesive. So basically this was a bad tutorial. You just need adhesion promoter and it will never come off.

@poptart5534

3 жыл бұрын

congratulations you now have an emblem that stick out from ur steering wheel lol u dunce

Detonou as bordas!

Poor steering wheel

Heat gun is easier

I'd rather paint the real shit after getting it off as opposed to putting that fake thing that will eventually fall off. Good job though.

@shadowedanjel559

Жыл бұрын

@mambo hdm just pull the horn cover off and press the clips from the back side, like you would the front grill emblem.

Do you know why honda moulded logo into Horn pad ? Because it cant fly on your face and blind you when you face accident and airbag deploys ! Ricer 😂😂

And now do you think that it is more pretty??? Does not match any other color on the dashboard. The only happy is the Seller of this.

"Don't push it in hard yet." That's what she said. *ba-dum-tshh!*

Fake

Or you could have just unplugged the battery

@nicktills2786

5 жыл бұрын

3 bolts and a wrench or just 2 quick snap fuses... hmm.

@792bnz

5 жыл бұрын

Not a good idea for any honda 2002 and after. You will need manufacturer codes and those are a pain on some cars. Mine took a few tries to register

🤦‍♂️

Complicate job

Ficou uma merda

Butchered!!! Yikes! 😂😂😂🇨🇦

Put something on airbag to make it look cool is soo stupid, airbag are made to save your life, this logo gonna fly throw your head if you have an accident.. Turn the airbag off or get a real sports wheel whitout airbag

@gasmaskdav9155

5 жыл бұрын

Darko Hugo no it’s not. The airbag when engaged. Pushes the cover upwards

@NeonBeeCat

5 жыл бұрын

does he think the airbag comes out of the badge?

@792bnz

5 жыл бұрын

The steering wheel cover comes off 😒

@riclaflair9212

5 жыл бұрын

Just don’t crash dummy

horrible outro