Someone needs to create an FN FAL/L1A1 replica.

@meme4one

8 ай бұрын

This would be great.

@garyr2650

8 ай бұрын

Yes

@andyjohnson6270

8 ай бұрын

That would be looooonnnngggggg.

@garyr2650

8 ай бұрын

@@andyjohnson6270 personal ID love to see a .22 cal side lever psg1 springer I think that would be amazing and would buy one the second they where available

@rizaradri316

8 ай бұрын

Agreed

The “fake round” molded on the follower is present on actual magazines. It allows the rounds to stack properly. That magazine looks surprisingly similar to an actual AR mag.

@engineeredlifeform

8 ай бұрын

A 'follower' I believe.

@johncarry5989

8 ай бұрын

Just guessing but it might actually be a functioning AR15 mag. Might be cheaper to use a real one or a real mould than to make a fake one from scratch.

@engineeredlifeform

8 ай бұрын

@@johncarry5989 I suspect they are run offs from an old real mold, prob using cheaper plastic.

@AbbieOates

8 ай бұрын

I would think for regulatory reasons it would not be functional as a real magazine. If it is, that is surprising. @@johncarry5989

For anyone owning this, it’s important to regularly check the main case screw accessed by removing the rear grip, if it comes loose it can crack the casing when fired, it’s worth adding a bit of loctite. Other than that it’s a great replica & very accurate for the price.

@forestchump76

5 ай бұрын

Is this accessed by simply removing the Phillips screw inside the grip?

@monstersince

4 ай бұрын

my presumption is that keeping the Phillips screw in the pistol grip tight is enough@@forestchump76 I've mentioned this to dealers who say they've never encountered an issue.

@stefanoanthonypillai5858

3 ай бұрын

Any idea where I can buy a spare casing ?

@stefanoanthonypillai5858

2 ай бұрын

I'm looking for a casing

@monstersince

2 ай бұрын

@@stefanoanthonypillai5858 have you tried Umarex

Thank you for all of your reviews and knowledge on this sport I enjoy all of your posts even if I’m not a pistol guy your passion and dedication to giving a non biased analysis of each gun is a joy I’ve only been a shooter for 1 year as I can no longer use my longbow due to arthritis I did buy a gun which you reviewed which was a walther reign in 177 I’m so pleased with it keep it up you a star

@co2addicted788

8 ай бұрын

😁🤟🙏

I salute your patriotism Andy. Well said, Sir.

Nice bit of kit could be tempted and it’s the right color so the wife thinks I’ve only 1 😂

I bought one when they were originally released a few years ago & it's always been around the 11ftlb Mark, and there's a grub screw on the flash hider that allows it to be removed & a silencer fitted

Hi Andy first off i would like to thank you for all your reviews, I am quite new to the sport ,just over a year now and i have taken everything on board from your videos. And i must say i love them ,me and the lads watch your reviews every Friday in our tea break. you have got two of us shooting again both with our home plinking ranges .When i was a child i got my first air rifle and pistol at the grand old age of 10 .Now ime 63 i can afford a bit better lol. Keep up the grand work mate looking forward to all the future reviews, cheers again from me, Steve and the lads at work :)

@jackworsley2562

2 ай бұрын

He’s definitely giving a lot of us a second childhood 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧 I agree with your sentiments and also appreciate the work he puts in making these videos, everything is always harder than it seems 🫡 his style is entertaining while being informative. amazing range of guns now, who’d of ever dreamed we were going to be able to have this much fun back in the 70’s

Another great review. Thank you.

looks great Andy, thanks for the review.

I just love your responses to nutty troll comments. That's just another plus for why I subbed besides being the better of all airgun channels out right now.

There is a little grub screw on that muzzle flash that comes off to reveal a threaded barrel.

Good video. We have done our testing of the Umarex M4 and can add that the Flash Hider can be released by a grub screw then unscrewed to reveal a 14mm CCW Thread. ours dieseled as practically all Springers and has settled down nicely.

@forestchump76

5 ай бұрын

I dont suppose you know of an adaptor to allow an 1/2 in unf silencer to be fitted by any chance? I have a k3 neo that is itching to be paired up with the m4....many thanks to anyone who can shed a little light

@UmarexBoysClub

5 ай бұрын

@@forestchump76 hi I believe best fittings do 14mm to 1/2 UNF adaptors. I will ask around and get back to you 👍

@forestchump76

5 ай бұрын

@UmarexBoysClub great stuff, thanks for getting back to me

@stefanoanthonypillai5858

3 ай бұрын

I'm looking for this casing any leads ?

Worth it as a plinker or small crittergitter. I have my opinion on pellet guns looking like military weapons though. I wonder if that is necessary or wise at times but that's another subject. I think the fake magazines would be more utilitarian if it were designed with storage in mind. When I go out shooting, I often use the likes of a Tic Tac container or other flip top mint container to hold pellets. If the magazine inside was fully hollow or compartmented, it would serve the purpose of holding extra pellets and maybe a few emergency hex wrenches.

Great video as usual, just to say the tip does come off the barrel to allow fitting of silencer there's a small grub screw you need too loosen first.

Good advice bout inviting ur neighbor over, just might get another person hooked on this sport we adore.

Happy Friday. Dark, but dry in Dublin.

@simonnoble7589

8 ай бұрын

hi , it`s foggy and dark here 8c brrrr

very nice, might end up on my wall next to my MCX

A good opportunity for Umarex to produce either a C02 or PCP version incorporating the charging handle and magazine.

A surprisingly nice rifle great work keep it up

Another fantastic video.

THANKS ANDREW FOR ANOTHER GREAT HONEST REVIEW SIR. TAKE CARE HOPE YOU HAVE A GREAT WEEKEND SIR 🇬🇧👍🏼

Watched this 2 times now, I am sold, buying one.

Great review Andy, I bought one of the original Rifles about 5 years ago was primarily a wall display, but the of occasions when I wanted to use it was somewhat underwhelming was pumping out around 6ft/lb so it was more style over function, however they are really well made & do look the part, I've seen a couple on display my local Gun shop, so I may be tempted to revisit this one 👍

@jmccann2838

8 ай бұрын

I had one which was used regularly for light plinking. In my experience the power plant was already far too powerful for the chassis. The screws that hold the plastic stock in place screw into soft white metal. The recoil literally destroyed these threads and rendered the gun useless.

@biggusdickus5986

8 ай бұрын

​ I hate polymer ( plastic ) on a gun, l know l know they're using it on real guns nowadays but that's a much stronger kettle of fish, and l still don't like it, plastic chassis and plastic triggers a real turn off, l like the reassuring feel of cold metal and its weight. I won't buy any gun with plastic chassis, l can take it on a umarex pistol as grips but as for anything else naw.

Spent yesterday morning tapping the table , bacon at the ready waiting for your Friday review . Friday breakfasts aren't the same without it ! After 2 hours of Checking the site and a little cursing the penny suddenly dropped , it was only Thursday . Bacon went back in the fridge ! ! ! Not a fan of replicas but can understand why people are , nonetheless very good and fair review . Dave

looks great! i wish we had these in Canada...

The "me love you long time" rifle 😂

@russellham2094

8 ай бұрын

😂😂😂

POWER ON THAT IS 11.5 FOOT POUNDS GREAT WITH THE RIGHT SCOPE GREAT RATER TO I HAVE ONE OF THEM

The rifle looks good. I plan on purchasing one.

@biggusdickus5986

8 ай бұрын

I wouldn't the polymer gives up very quickly and they fall apart quickly

I started with a gat gun from a game and country fair miss those days 😢

An L1A1 would be awesome

Excellent 👌...who remembers the jackal.

i agree with richard ( blank ) and i'll stick with my 66 - 78ft/lb bolt action thanks......

I have the m16 one of these,nice rifle.

10 seconds into the video I am having one. I was going to get the co2 but so glad I didnt now.

Not sure the FEO visiting to check one's gun cabinet would like to see that over the fireplace😂 Quite fancy one though....

Getting one

Speaking of glass; that looks like a rather nice piece of, wide angle Nikon-esk, glass at then end of your bench.

@AAROnair

8 ай бұрын

Leica, I shoot via Panasonic. stay safe. Andy

Finally after you putting this video out i got around to buying the colt m4 today. Love it. I am wondering about getting some decommissioned rounds i presume they would be 5.56x45 NATO rounds? Found a supplier who sells 5 decommissioned rounds.

I think you could use a scope riser there! LOL nice to know someone makes a variable magnification ACOG replica with a X zero option, mine are all fixed to x4 as far as I recall. Wait the link says it's only x2 ?

Sieht auf den ersten Blick toll aus,auf den zweiten ,naja... Tolles Video 👍🏻 👍🏻 👍🏻

Oh how things have changed since buying a .177 Jackal from my sister's clothing catalogue...

Nice, Andy. I wish someone would come out with an M16A1 version. Biased opinion, but I loved it.

@garyr2650

8 ай бұрын

Crosman had a m16 break barrel not a a1 as it has removable sights hard to find now but can be found used

@stevegrew6758

8 ай бұрын

Huntsman do a m16 a1 vn… same internals as hell boy m4…. £170 ish terrible trigger though

Nice.

I literally watched your original 5 year old review of this 2 hours ago 😮

The silencer should be attached on the end of the barrel without removing the flash hider. Theoretically, an airsoft silencer replicas for M-4 should be compatible.

Bit of a marmite model but I'm sure it will have it's fans. Another great review Andy. 👍👍

Quite a nice price for this, looks the part 👍

I wish these where available in the states it would go amazing with my crosman m16 break barrel pellet rifle

@BadlydrawnBen

8 ай бұрын

Its umarex so it should be available in the states

@garyr2650

8 ай бұрын

@BadlydrawnBen umarex has alot of stuff that isn't

@BadlydrawnBen

8 ай бұрын

@@garyr2650 that's surprising! On the bright side for you guys though you have the first and second amendment when we can't even carry a leatherman or a pocket knife and can get arrested for speech that could hurt someone's feelings 😠

@johncarry5989

8 ай бұрын

Why!? Just buy a proper AR15 lol!

@garyr2650

8 ай бұрын

@johncarry5989 it's frowned apon to shoot a ar in the backyard in town

Nice to see a replica air rifle that has some decent power. I may have to acquire one finally. 😊

Does using that particular scope mean the front sight is in view when you look through it?

Good morning Everybody and our host Andy ......

@AAROnair

8 ай бұрын

Morning Simon, Morning all.

@simonnoble7589

8 ай бұрын

have a great day Andy @@AAROnair

Collective noun for rails is a waddle of rails. (That is the rail bird, but you did use flock anyway 😁)

Hi Andy do you think it looks the part

ur such a character :P I love it.

What type of shooting table are you using? And where did you get it?

Another great video! Question though, this or a MP7 springer?

@MichaelStroup

8 ай бұрын

​@@FlyboyHelosimbut imagine a PCP MP7. Would be the bees knees. I had to google it! But Umarex indeed does make a MP7 springer!

@MichaelStroup

8 ай бұрын

@@FlyboyHelosim probably not. But we will see. The specs say it only shoots 495 fps. It looks to be brand new. So hopefully there will be reviews soon.

sorry Andy, the rear sight cannot be removed and the foresight can to facilitate a suppressor.

ANDY do you not do any springer tuning videos to learn about best things to do to tune it & what not to do as my hatsun airtact is very good no twang but my stoeger x20 s2 has a loud twang & dont want to cut a can and put it inside in case it damages anything

non movable charging handle molded in dust cover to fake but its still better than the pump up version by far thanks

I'm interested in purchasing one.

❗️I have the JG: Huntex-M4. I like it but it's only 18- round.

See! Umarax can make them in black without ruining the item by printing huge white text on it.

It looks more like a M16...The M4 is supposed to have a shorter "Carbine" barrell.

@LindseyGayham

8 ай бұрын

But i guess you couldn't cock it with a short barrell.

My 90s Rambo action figure had this.

If it went so low with heavy pellets and was near 12ftlb with 8.4’s I bet it would go way over with light weights.

Only in .177? No .22 version?

😮Also, what a Video to release at the time of yet another American shooter on the loose.

That thing looks ridiculous. Why make a carbine M4 replica with the barrel length of an M16A4? And how Andy said _'if you wanted to fit a silencer'_ with a straight face, I'll never know...

@dixenherize6969

3 ай бұрын

Someone clearly doesn't know much about guns, or why TF a longer barrel would be beneficial and why you'd want a longer barrel and what it would bring to go along with the "carbine rifle". Clearly it's meant for "longer ranges"

@swoop1352

3 ай бұрын

​@@dixenherize6969 Someone else clearly doesn't know what 'supercilious' means.

@tigererik1

Ай бұрын

I agree..the barrel length is long. But this is an airgun/break barrel. So you need the length to be able to break it. And to get an ok presisjon. But you could, like I've done. Put on a fake silencer. It makes the barrel look shorter.

is it a smooth-bore barrel ?

Put a carry handle on it and scope the handle, then you can use both sights

@citizenVader

8 ай бұрын

@@FlyboyHelosim that is fixed easily with a little tape under the rear bolt

Thank you foor a great review. I have long since wondered if there are some policeman with a chronograph running around to make sure that people dont have illegal +12lb-ft air rifles. How is this law actually controlled over there?

@jacklurcher5813

8 ай бұрын

Generally if someone is caught shooting without permission, wildlife crimes or just being a nuisance with an air rifle/pistol the police will check if it's within the legal limit and add it to any charges if it isn't. I've been shooting in my garden when the police were in the area. They had a quick look over the hedge, waved, and went on their way. As far as I'm aware they don't randomly check. I am in a fairly rural area though, so nobody freaks out about anything vaguely gun-like.

Been looking to get this but sold out everywhere

Is it better than the crossman m4 177?

How secure is the stock? In some angles it looked like it was drooping down from the action, yet not in others. Could have just been the camera angles of course. Quite surprised about the price, no doubt helped by the plastic bits, but whilst it's not one to rush out and buy, it's certainly makimg me itchy for one 😁.

@PLAYINGAROUND

8 ай бұрын

@@FlyboyHelosim Which would not aid accuracy. I would if it's a standard AR fit?

A pair of brackets and a nice display item above the fireplace??

Nice thing mate....I would put a UTG Compact 4-12x44 on it and you´ll be served!

How can you bump up the power to say 11ft/lb

Where could I buy one, really interested

Most definitely picking one up 👆

I bought one of these. They're fantastic and have some real kick. Accurate too. Don't know if you mentioned this put its a pain in the arse that the plastic foresight isn't detachable. I had to cut mine off when I wanted to fit a red dot.

@jonfisher9214

4 ай бұрын

Andy describes how to remove the plastic foresight at around 2.20 minutes in.

@anarcho262

3 ай бұрын

Accurate ? I own several air rifles, including this trash here and i never really hit anything with the iron sights. Biggest regret i ever had with a rifle. There are 60€ rifles i use and they are way more accurate.

@garethjohnstone9282

3 ай бұрын

@@anarcho262 Just fine for me.

@anarcho262

3 ай бұрын

@@garethjohnstone9282 Am i doing something wrong ? The back part of the iron sight is moved to the complete left side and then only sometimes, like 1 of around 30 shots i actually hit the target i wanna hit. If i put it in the middle, it shoots way more to the right. That thing is a disaster for me.

@garethjohnstone9282

3 ай бұрын

@anarcho262 Lol, yes mate. I just got a red dot scope, attached it and zero'd it in. Thats why I was talking about removing the front sight in my first comment.

Can you get this on 22 or is it just 177

Saw a video by umarexBoysClub. He reckons the front comes off for silencer fitment?

I Really enjoy my Friday mornings watching AAR Airgun reviews, they are very educational, intriguing and gives us enthusiasts a desired Christmas list. Andy does his wonderful reviews in so much detail, he reviews on a bit of everything. HOWEVER and could be mistaken, I've never seen any review on a 10m Match Rifle (sub 6). AAR Get yourself an Anschutz or Feinwerkbau and put on those Diopter sights! Would love to see a full review and know you can make that a fun to watch! The ISSF community would definitely appreciate that my friend. 😊

Ok I’ll try again andy I bought a bsa r12 CLX pro I love it I did this after watching your review of same……CAN YOU PLEASE RECOMMEND A FEW SCOPES IN THE £500 and under bracket that will cover me for target and pest control THANKYOU also some good mounts for the scope.

@AAROnair

8 ай бұрын

No need to shout! much to contrary belief, i don’t sit here all day waiting to answer all questions coming in from people, I do have to work making videos etc, which are very time consuming. Try the Taurus or the continental scopes. stay safe.

@peterprice5896

8 ай бұрын

@@AAROnair what so you don’t sit around all day playing with guns…..boy I had you weighed up all wrong 😂😂thanks for the advice happy plinking “stay safe” also the r12 CLX pro is a belter and like your FAC r10 they why have to pry it from my corpses death grip.

carry handle ?

Is this hydraulic

Its call wind factor

i know they wanted to keep the replica status on the gun but a 10 shot magazine would have been nice....I guess I am just one of those break it and fire it kind of shooters

Morning all :)

I'd be scared some idiot would shoot me and call me a terrorist, but I live in the states. But thanks as always for your show

Where can I purchase one?

Good morning all .

Could remold the inside of the mag, and remake it into a hidden flask 😇

That is a beautiful looking air gun just a shame it's a fake mag , would be nice to have a few shots without reloading.

Where can I get this?

Great Price 💷💷👍

So, if I buy a new airgun like this one, and for what ever reason the police check it before it has gone through it's "dieseling" process, I get 5 years in jail?

Actually Iv got one and Iv done a lot of work to it, as in tuning it to shoot better and I must say it’s absolutely fantastic for the price.

I'd love one but someone sees you calls 999, SAS turn up etc.