Code P0011 FIX.Replacing the Oil control valve solenoid on a Hyundai/KIA 4 cyl

Автокөліктер мен көлік құралдары

P0011 Camshaft position timing over advanced "FIX"
How to replace the oil Control Valve solenoid on a 2008 Hyundai Sonata 4 cyl
#FIX #P0011 #Oil Control Valve

Пікірлер: 14

  • @mrikesterful
    @mrikesterful6 ай бұрын

    Thanks, i hope this works . I was told also that i may need to replace intake Camshaft Position Timing . Is this an option if the oil control valve doesn't turn out the light ????

  • @gerryrice4848
    @gerryrice48485 ай бұрын

    No coolant came out after sensor removal???

  • @jamessaxton4285
    @jamessaxton4285 Жыл бұрын

    Did this fix the code? I got the p0011 and the vvt solenoid tested good

  • @Singleturbocobra

    @Singleturbocobra

    Жыл бұрын

    Yes

  • @Rubenchavez87
    @Rubenchavez8711 ай бұрын

    Did you test it after it was out? Or just swapped it?

  • @Singleturbocobra

    @Singleturbocobra

    7 ай бұрын

    Pulled it and cleaned it and reinstalled it.It got better ,but came back 3 weeks later with the same code

  • @alphapakllc
    @alphapakllc3 ай бұрын

    What size socket to take out the coolant temp sensor?

  • @Singleturbocobra

    @Singleturbocobra

    3 ай бұрын

    I believe it was a 19mm

  • @LilcoIa
    @LilcoIa7 ай бұрын

    Is the exhaust and intake valve the same? I keep getting the same code for both parts. Other code doesn’t fit my model. Got a Hyundai i10 2012

  • @Singleturbocobra

    @Singleturbocobra

    7 ай бұрын

    Unsure if the intake and exhaust solenoids are the same.Call your local dealer and see if the part numbers are the same to confirm 👍

  • @_Therepenter_
    @_Therepenter_6 ай бұрын

    Can a bad one cause the car to shut down

  • @Singleturbocobra

    @Singleturbocobra

    6 ай бұрын

    Never seen it shut a car down,but it does control timing.So anything is possible

  • @JohnnyFriskey-et1mk
    @JohnnyFriskey-et1mk10 күн бұрын

    Not a very good view of the job

  • @Singleturbocobra

    @Singleturbocobra

    10 күн бұрын

    @JohnnyFriskey-et1mk Thank you for the feedback. I will do better next time 👍

Келесі