Check out my latest CNC Bit Video - Uncommon CNC Bits you Should Have: kzread.info/dash/bejne/gKh7o7B8fK-xZaw.html

@covakoma1064

2 жыл бұрын

What about flutes ? One flute , 2 3 etc? For wood aluminium plexi difference?

I'm new to cnc routing, I'm used to metal working miller's, so I'm just getting my head around it all. So your videos are great, very well executed and actually show what needs to be shown to 👌 Keep it up pls, as its helping me out already. Cheers dude

@MakeTechCreate

3 жыл бұрын

Awesome, thank you! and thanks for watching!

@Dragon-Slay3r

Жыл бұрын

Henry Cyprus? 🤣 handle cover?

Nice production quality. What's missing is the depth of cut, depth per pass and nice to have would be feed rate.

@MakeTechCreate

5 ай бұрын

Thanks for the feedback! I didn't add feeds and speeds because they vary so much depending on the materials you're cutting.

@peterbloch5590

5 ай бұрын

@peterbloch5590 Yes,of course, feeds and speeds vary so it was only a "nice to have". However, depth of cut is independent of any machine so you could still mention what you used on your machine. Thanks

Thank you for that detailed explanation on V bits, can you tell me do I need run a higher speed with a 90 degree bit over say a 60 degree since the 90 cuts more material

@MakeTechCreate

3 жыл бұрын

Thanks, Colin. I'm using the default Feeds and Speeds in Carbide Create, which seem to be the same for both bits. I also have both bits set the recommended setting of 3 on my Dewalt router.

@colormeblooodred8500

3 ай бұрын

This is ridiculous😂 naming video "... for beginners" and cannot provide feed rpm and doc, saying that you use some default settings😂😂😂😂

Thanks for the video. What software do you use to create your toolpaths?

@MakeTechCreate

Жыл бұрын

Carbide Create or Vectric Aspire are the 2 programs I work in. The first one is free.

Out of curiosity, how deep of a cut did you go with these bits? I find that the 60° bit 1/4in shank gives some great results. Thanks for sharing!

@MakeTechCreate

Жыл бұрын

I didn't set the depth for any of these, I just use the software defaults for v carving. Agreed, 60 degree 1/4" bit is great.

Hi, just a quick question how do you measure the tip of v bit when the seller doesn't know ?

@MakeTechCreate

5 ай бұрын

Do you mean the angle? Or across the cutting edges? Most software should tell you where there measuring points are.

@keeptrying7640

5 ай бұрын

The very tip, sir, how's it measured

Can you please tell me how deep each bit carved to get the results? Thanks

@MakeTechCreate

Жыл бұрын

Well, you can go as deep as the bit allows. The depth will depend on your project and your needs.

What is the drawing look like? Can you share it? Thank you

@MakeTechCreate

2 жыл бұрын

You mean the digital file?

¿Precio del equipo? ¿Como lo adquiero?

@MakeTechCreate

3 жыл бұрын

Bit vary greatly in price. I get most of my bits from Amazon.