CNC Machining - second side job - roughing off material | Hermle C400 | SolidCAM | ZeroClamp
Ғылым және технология
Just Machining - 02
In this episode of "just machining" you will the CNC machining of the second side from a part right after the raw part clamping. The part is screwed down to an aluminum baseplate by 4 x M5 screws. The baseplate itself is exchangeable with the ZeroClamp zero point clamping system.
The first roughing tool is an awesome beast and is only limited by the machines power :)
⚠️ Please do not mill / drill / cut aluminum dry! This is just for video reasons and will kill your tools and parts. ⚠️
-- my video setup * --
camera: amzn.to/2SP5ymm
SSD: amzn.to/3yrRj65
Macro lens: amzn.to/3hWAYQz
----------------------------------
0:00 Intro
0:11 plunge mill - Hoffmann - D32-Z2 - 211811 (roughing)
0:56 ball nose - Hoffmann - D12-Z2 - 207026
2:09 corner rounding - Hoffmann - R6-Z6 - 208023
2:45 shoulder mill - Hoffmann - D50-Z5 - 214857
3:21 chamfer mill - Hoffmann - D6 90° - 208070
---------
Follow us on Instagram:
/ bavariacnc
Like us on Facebook:
/ bavariacnc
---------
---------
*Die mit (*) gekennzeichneten Links sind sogenannte Affiliate-Links. Wenn du auf so einen Affiliate-Link klickst und über diesen Link etwas einkaufst, bekomme ich von dem verlinkten Online-Shop oder Anbieter eine Provision. Für dich verändert sich der Preis nicht.
DISCLAIMERS:
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com / Amazon.de and affiliated sites.
Links marked with an (*) are affiliate links
This video was not paid for by outside persons or manufacturers.
No gear was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.
#CNC #Machining #Machinist
Пікірлер: 52
Nice! Would it be possible to edit in some still-shots of the different tools used for reference?
@BavariaCNC
3 жыл бұрын
I really appreciate your question!! Because for this video I did still shots of the tools (rotating at 20rpm) I just didn’t know where to show them, so that the audience won’t get bored. Where would you like to see them? All at the beginning? At the end? As a Picture in Picture during the tool change? I am really open for all conclusions to this. So anybody write me your ideas! Thank you!!!
@mactheo2574
3 жыл бұрын
@@BavariaCNC I think adding still shots of the tool during the tool change would be wonderful.
@mbatur35
2 жыл бұрын
That's great, you suggested a valuable idea.
It is mesmerizing! Nice job 👍
@BavariaCNC
3 жыл бұрын
thanks a lot !!
By far the best machining video.
@BavariaCNC
3 жыл бұрын
Thank you my friend!!!!
another great video
I´d like the video editing, wide shot and close-up, good job.
@BavariaCNC
3 жыл бұрын
Thank you!!!
Sensacional! 👏🇧🇷
Nice man! I work whith a mikron ucp800 Duro.
Dope
@BavariaCNC
3 жыл бұрын
thank you!!
nice job mate. I would mill those chamfers on holes not drill them tbh.. you can see that little bit of vibration on tool there.
@BavariaCNC
3 жыл бұрын
You are right, milling them would be much better for the surface!
Cool
👍
Awesome work guys! How do you fix/calibrate this part to mill the other side?
@BavariaCNC
3 жыл бұрын
Thank you, Rafael! The part is having four M5 threads and I use those to screw the part down to a baseplate. The baseplate is hold by my zero point system. To calibrate it, I use several points on the other side to align it correct on the baseplate and there is an 10H7 where I will get my zero from.
Hi, sehr schöne Videos! Darf man fragen wie dein Setup zum filmen ist, bzw. wo und wie ist die Kamera angebracht?
@BavariaCNC
3 жыл бұрын
Vielen Dank! Prinzipiell muss ich ein paar led Lampen in die Maschine. Setzten sonst ist es zu dunkel :) und die Kamera steht ganz klassisch auf einem Stativ vor der Maschine. Ich mach mal ein behind the scenes:)))
うまいね〜😋 とくにコーナーRカッターに感動した🥲
How is this held to the fixture plate?
@BavariaCNC
3 жыл бұрын
The part has 4 x M5 threads. I use those to screw it down to baseplate from my zero point clamping system
Would love to see the name of the tool holder along with the tool. Also, I love that you show technical difficulties in your videos too. Puts a more human face on the process
@BavariaCNC
3 жыл бұрын
That is a good idea! I will catch this up, thank you!
Sehr schön! 👍 Welches CAM-System setzt ihr ein?
@BavariaCNC
3 жыл бұрын
Hi! ich programmiere mit SolidCAM
Which camera do you use?
@BavariaCNC
3 жыл бұрын
I use a BlackMagic Pocket Cinema Camera
Yeah I wouldn't buy a specially coated rounding cutter for one cut either. TiAln still gets the job done 😆
@BavariaCNC
3 жыл бұрын
TiAln is a pretty good alrounder.
@diditwork370
3 жыл бұрын
@@BavariaCNC Yeah I agree. I wouldn't run production on aluminum with it though because of the aluminum in the coating.
Mein Neid ist mit Dir. Darf leider nur mit 4 Achsen spielen und mit 6300 U/min Spindeldrehzahl wirds meist recht langwierig.😁
@BavariaCNC
3 жыл бұрын
Ich hab mit 4.000 1/min und 3 Achsen angefangen also von daher einfach mal abwarten vielleicht kommts noch :)
@SimsonSupermoto
3 жыл бұрын
@@BavariaCNC neue Maschine kommt bei uns soooo schnell nicht. Die 4x ist jetzt 11 Jahre alt. Die 3x auch schon 10 Jahre. Cad/Cam nur, wenn ich mein Privates nutze, sonst alles an der Maschine programmieren. 4x programmieren mache nur ich und der Lehrling und ich bin Quereinsteiger. Alles was ich kann, habe ich mir selbst bei gebracht. Die Cnc Drehbänke sind zwischen 15 und 30 Jahre alt. 😏
@thomasschmidt2915
3 жыл бұрын
@@SimsonSupermoto Ich darf als Azubi an einer DMF 260, die 6-7 Jahre alt ist arbeiten und programmieren. Hab da ziemlich Glück gehabt :D 18000min^-1 und nen Eilgang bei dem viele Maschinen in die Grätsche gehen würden ^^
@DancingMachine1
3 жыл бұрын
@@SimsonSupermoto Ich arbeite an einer Deckel von 1988 :D
Hast du beim Fasen der Bohrungen eigentlich ne verweilzeit? Man könnte so noch die Rattermarken wegbekommen :D
1:20 Would it be better to mill like this？ball end mill
@BavariaCNC
3 жыл бұрын
It is a ball end mill. I just put it on an angle to not cut with the center of the end mill
15 dislikes came from welders
@BavariaCNC
3 жыл бұрын
probably 🤣🤣
i just want to know what the hell the part is........
@BavariaCNC
3 жыл бұрын
:)) An agreement with my customers include that i dont promot him here, sorry ;)
I'll give it a 92. Always start and end your chamfers on a corner if possible.
@BavariaCNC
3 жыл бұрын
Thank you! If possible you should do I agree.
@jackflash6377
3 жыл бұрын
@@BavariaCNC Just giving you a hard time .:) Love the videos !!!
Awesome! But that music, no bueno!
0:38 what a waste of metal 😂