This is the only channel that can get me to sit down and watch a 30 minute video and still be upset when it ends

@nogmeerjan

5 жыл бұрын

WTF 30 minutes. I wasn't even aware :-)

@myboxissharp

5 жыл бұрын

@@nogmeerjan i was just about to say the same thing

@rosshaskell7967

5 жыл бұрын

I concur.

@hvheerden

5 жыл бұрын

Right with you there

@Comerz888

5 жыл бұрын

same

Super video. My daughter is home and listening over my shoulder. She teaches "G" code in high school shop. I told her that I am too old to learn because I am 73. After a good beating from her, I have changed my mind about a few things. 1, she is stronger than I. 2, I can do this., 3, the bruises will heal soon enough.

@bogdanbaubau

5 жыл бұрын

Ask Tony to teach you the chop.

@mannycalavera121

5 жыл бұрын

Never too old for anything man

@onlooker251

5 жыл бұрын

Is your daughter married? I’m sure there could be romance in the coding...😊

@isbcornbinder

5 жыл бұрын

Her personal information is not available from me.

@edwardgorham7793

5 жыл бұрын

you can parlay those bruises into some solid extorsion currency

Don't lie to us TOT... You didn't build this... You just left your mill and lathe alone in the garage too long and came to to find their offspring....

@anikidwolfy

5 жыл бұрын

i like to think his garage goes full on sausage party

@markfryer9880

5 жыл бұрын

@@anikidwolfy Oh my Lordy that is going too far!

@steventhedog94

4 жыл бұрын

@@TinS0lder this hot old tony

@EiToCi0to9

4 жыл бұрын

He won't admit it because he hoped that the tig and the mill would get it on to produce a 3D-printer. But while the tig, ahem, sharpened its tungsten, the lathe got in between and the rest is history...

@Polynuttery

3 жыл бұрын

It’s amazing what evolution can do...

Somehow you've managed to keep your viewers entertained while teaching difficult subject matter. I think you have the right mix of humor and technical information with exceptional video editing. I bet at least 80% of the viewer/subs don't own or plan to own any machinist tools, but you make the information quite interesting and fun to watch. Who wants to watch 20 minutes on thread pitch analysis and sine bar fundamentals?...apparently over a million! Well done Tony and thank you for putting so much thought and time into making these videos. They are well received. *tips hat*

@sharkbaitsurfer

Жыл бұрын

Wonderfully summarised, Tony has a seriously entertaining and informative skillset across many many fields.

@Damazuss

Жыл бұрын

Bro i dont even own a drill

@ronbuckner8179

3 ай бұрын

I owned a bunch of this stuff, but my wife and I “retired” and all of my stuff went away with the weather. Meanwhile I have since replaced $10k of sewing machines since the move. Apparently, all grandma’s sew around grandchildren ( I should’ve seen that coming). Well I’d imagine that spare bedroom might be kind of cluttered with a mill in the corner, and the cats would play he’ll with the chips.

So, I'm sitting in my semi at a rest area. I'm fully expecting the cutting tool to crash into the work piece in the intro. Right as the cutter touches the work piece, the air brake pressure relief valve opens in the truck next to me. 😳 Yes, I jumped! 🤣

@THEOGGUNSHOW

9 ай бұрын

😂😂😂❤

Your video production and editing work is getting very outstanding TOT. It really makes watching a half hour video very pleasant indeed.

@Bl4ckw0lf1

5 жыл бұрын

Wait, it was *that* long? I didn't even notice.

@nathan-fh8hp

5 жыл бұрын

Yeah I had no clue I just wasted half an hour

@Acheiropoietos

5 жыл бұрын

You mean that karate chop at 7:22 was fake?

@EvenTheDogAgrees

5 жыл бұрын

Yup, ToT's style is unique. Humorous, but just hitting the right amount of silliness without overdoing it.

@rustynut1967

5 жыл бұрын

Great sound effects to

"Things are about to get crazy" *dials up amps from 10-11* me: WHOA, THIS MAN IS INSANE!

@slowpokejpg

4 жыл бұрын

You see, it's a double entendre because of the famous quote from the move Spinal Tap, "these go to eleven", these being guitar amps. Whereas he's changing the amps settings on the welder.

"I don't know what colour this is but its somewhere between battle ship grey and a British sun tan" :) hahaha

@artmckay6704

3 жыл бұрын

I prefer the Pugeot Sound Seattle area rust patina........ slightly rosier than the Brit pale fog tan :)

@wierdalien1

3 жыл бұрын

@@artmckay6704 i mean, i am pretty tan this year but i get you

@artmckay6704

3 жыл бұрын

@@wierdalien1 :)

@gingerjedi1980

3 жыл бұрын

Too much colour for British tan. Think of skimmed milk lol

@stewartyates4510

2 жыл бұрын

Color**

I'm trying to get some of my own work done over here! Now I have to put everything down and go over to the couch and make myself comfortable and watch this!

@adolphadillard3220

5 жыл бұрын

same try to fix my Y axis here.

@mattinkel7342

5 жыл бұрын

I was meant to be cooking...if clickspring posts a new video Im gonna starve

Wow that transition from twist bit to reamer!!! I swear I was watching Spielberg's work! TOT=FTW

TOT. What can I say? That was just Amazing. The Combination of the Machinist, Welding, Tooling. Metallurgy and CNC Knowledge can only be Compared to your Video Production and Brilliant Narration Skills.. KZread is a World Stage and You’re a National Treasure..

Great video Tony. Something I noticed, just in case it helps (and in case you're still using this) is that the motor mounting flange is not square to the axis of the "shell" which holds your bearings. You can see the runout at 10:26 if you look closely. Anyway, thanks for all the great content - always a laugh and always a good lesson too.

"Between a battleship grey and a British suntan" lol. I resemble that remark!

"Ideally" this video should be LONGER

@stephennganga7499

5 жыл бұрын

agreed

Spinal Tap reference within the first 1 min...pure gold. Love your videos.

"I was going to use nails, then stopped, took a deep breath and came to my senses" 😂 You are hilarious. Love your videos. Keep up the awesome work.

on the bird nests just work with stainless steal and sell those as pot scrubbers

@sillywizard6220

5 жыл бұрын

kokodin that’s actually a good idea for Tony to put in his KZread shop! Awesome! And just in time for Christmas...

@martindinner3621

5 жыл бұрын

🤣 Excellent idea!

@shawbros

5 жыл бұрын

"stainless steal" steel

@amanofmanyparts9120

4 жыл бұрын

@sexiewasd I made a small one that burns wood with an hairdryer for a blower. Like a fool I put some charcoal in it and melted the bottom out of my steel crucible! Admittedly it was only very thin, so the next one will be the bottom of a non returnable 'W' sized oxygen cylinder.

@amanofmanyparts9120

4 жыл бұрын

@@ThyerHazard Their not so readily available in the UK. In fact all forging materials are hard to come by for the amateur.

Love the Spinal Tap reference at 00:44 This one go to 11!

@NomadUniverse

5 жыл бұрын

But why don't they just make 10 a bit higher and make that the highest?

@herb40til5

5 жыл бұрын

@@NomadUniverse Because this one goes to 11

In lieu of new videos, I’m watching older videos from ToT. Goddamn they are so good. Maybe the best I’ve ever seen on YT. Even if I had zero interest in the subject matter, the production, the writing, and the editing, are just top notch. Miss you Tony!

That's so sweet, I've been a machinist for almost 2 years now, and watching your videos really motivates and inspires me to take on projects of my own!

I'm still scratching my head as to why people would thumbs down these videos. Seriously... Why? Explain yourself. He doesn't click bait, has no commercials, is quite quick with his work, and adds some humor. Are you looking for music?! Broken fingers? Blood? Seriously...stop thumbing down stuff you probably don't understand anyway. Ok... I'm done... Whew.

@cho4d

5 жыл бұрын

Normally i'd say it's bots... but even the bots have a so much to appreciate in this video.

@aaronanderson7619

5 жыл бұрын

I would have to go with jealousy.

@bobedwards8896

5 жыл бұрын

Same as when u thumbs down a random video u look at the comes up on recommendations that has little to do with anything you like.

@tonywalker8030

5 жыл бұрын

Because they are in a position where their integrity is comprised.

@retrogamer33

5 жыл бұрын

Those saddo's do the same to Adrian Black, Big Clive and a few others even after the video has been uploaded for only a few minutes.

Well how exactly am I supposed to fully enjoy a ToT production with my pants on?

@pco1984

5 жыл бұрын

Close your eyes and pretend, I suppose ;)

@miles11we

5 жыл бұрын

I havent put on pants since '69 (aliens stealing my thought and all) but if there is anyone I'll trust with my thoughts being compromised its tot... and President Nixon

@anchorbait6662

5 жыл бұрын

in a bubble bath, obviously.

@donbovie

5 жыл бұрын

In privacy of your home, please dont tot at your workplace

@donbovie

5 жыл бұрын

After all he isnt professional porn star

The discrepancy between machining skills and welding skills here is hilarious! From what I have seen more recently happy to see that gap has in large part closed :-)

As someone who only owns the basics (hammer, pliers, few screwdrivers), I can't stop watching these vids, and the humour is fantastic!

I remember from my machine design class that having set screws 180 deg apart is actually weaker and more prone to loosening than having them 120 or even 60 degrees apart. I think this was in Shigley's iirc. May not apply since you're grabbing a flat, but still a random fact of the day!

@dimitar4y

5 жыл бұрын

True, since the screws are opposing eachother rather than working together; so all your holding power is solely on the threads, not by friction against a face.

@TomHaroldArt

5 жыл бұрын

@@dimitar4y Well, damn! The things you learn in the comments of a ToT video!

@Gottenhimfella

5 жыл бұрын

Generally true, but there's one exception: if you use them (2 @ 180) to improve the holding of a self-holding taper, and incline the flats (and the screws) in the opposite direction from the flanks of the taper, so the vector sum of the two forces is a thrust axially, tightening the grip of the taper. The slightest slip will increase the tightening effect further still. I've only recently come up with that idea (needing to transmit a sh*t tonne of torque without much available space) and it worked a charm. The key difference is that tightening the screws, progressively and in turn, does not create or retain clearance as it would with a cylindrical fit.

@dimitar4y

5 жыл бұрын

@@Gottenhimfella Well, yes, if the screw is flat on it's pushy bit, it'll be useless. But if the screws point to eachother, but are off-center, and have little pyramid heads, they'll push the SIDES of the thread against the object for massive holding torque.

@Gottenhimfella

5 жыл бұрын

@@dimitar4y That's another way. Not quite as strong as flat-ended screws set at an angle, bearing on flat "whistle notches" milled across the shaft, because your solution provides only line contact between a conical screwpoint and a conical dimple. This means the material along this line will be displaced (by yielding) at a lower torque, leaving the joint vulnerable to reversing loads.

"I fear not the man who has practiced 10,000 metal cuts once, but I fear the man who has practiced 1 metal cut 10,000 times." You are the master ThisOldSensei _{bows}_

I appreciate the music. I always wondered what it would sound like during a montage of a family fixing up their cozy hut as they accept this once-frightening island upon which they found themselves shipwrecked is actually a paradise, and more importantly, their new home. Edit: then, I guess they have a polka party.

Another amazing video from TOT. The 36 Chambers of TOT is strong here. I kept checking the time of the video hoping that it wasn't going to end. Exceptional job. Thank you for sharing.

ToT is literally the only KZread creator I like all his vids the second I start to view.

Note: When watching with your kids, you'll have to rewind the cold rolled karate chop about 75 times.

My favorite video ever! The joy of realizing my hero is human at 2:00 min in when the drill bit breaks ... priceless! Keep up the good work, this is a premium video channel with world class humor to boot! Thanks

Tony: - "Things are about to get crazy" - increases current on TIG by 1 amp Promising start, must watch!! ;))

Put the spindle on the gantry, and fill the entire router table with tools. Dozens! Hundreds!

@mafoose

5 жыл бұрын

Gang tooling! This is a thing!

@Gottenhimfella

5 жыл бұрын

@@mafoose Brings new resonance to the expression "on the block"

@robbiejames1540

4 жыл бұрын

NASA wants to: know your location.

Well time to nerd out again.

Milled my first gear today.... 36 tooth 14.5 pressure angle 16 DP for my old 12" Atlas / Craftsman lathe..... THANKS TONY!!!!! Also anyone who may have a worn out lead screw on they're Craftsman lathe.... ( mostly due to it's dual purpose of threads and feed ) I removed mine, flipped it 180 degrees, machined the drive end to fit the old tail end brass bushing, and made a sleeve for the drive end!!! Turns threads like new now.... No need to buy or build a new lead screw!! Thanks for your channel Tony!!!!

Thank you! I had a rough day, started with a panic attack, ended with a great new video complete with everything I watch your videos for! Especially loved the happy welding music.

Pants? I didn't sign up for this!

@makinwaves8147

4 жыл бұрын

Brad Miles GOT MY HAT THO!

Turned it to eleven, havent you!

@ixamraxi

5 жыл бұрын

I read that in the voice of Colin Furze...

@jesseowens2864

5 жыл бұрын

On the 11th no less

@vincentguttmann2231

3 жыл бұрын

You know that programmers count from zero, right?

Top quality TOT! All thumbs up! Thanks TOT, could you please give up your day job and just produce these informative, honest, hilarious gems for us very appreciative folk full time???

Not even two minutes in and This Old Tony already dropped references to Spinal Tap and Bruce Lee's one inch punch. I'm sure glad that I took the advice and buckled in.

i just love that stepper motor winding up sound!

Amazing work Tony! It is refreshing to be able to follow your quest in these complicated projects, yet have understandable narrative. As always: great (and fun) editing too! Thanks for sharing your adventures :)

I love that you pointed out the constant surface feet, i had no idea that mach 4 could do that!

This is one ore rare occasions that I subscribe to a channel. The reason is you are an excellent teacher. Clarity and humor are difficult to achieve. To complicate is easy, but to simplify is extremely difficult.

TOTally Out of this World! I'm speechless.

I've needed a new video This Old Tony...

Been an AvE subscriber for 5 years now. How I missed this channel is beyond me. Sir, you have my complete attention, and a loyal subscriber starting now.

Ok so ive been a pressure relief valve technician for 18 years and have recently moved to a new company who repairs many more types of valves, so long story short i need to learn to machine and weld. Your channel has given me some very serious inspiration as to what to do to start getting comfortable with more than just taking a simple skim cut or re establishing seat dimensions, i am going to start looking for a reasonable mini lathe where i can start to teach my self how to cut threads and turn parts from raw stock. You are really an inspiring guy tony so thank you for sharing your humor, skill, and insight.

When you were installing the bearings i distinctly heard another voice in the background saying " tappy tap tap "

@vincentguttmann2231

3 жыл бұрын

I sometimes hear a voice yell: "Coenteact!"

Wait?! What!? Yours goes to eleven?

Getting back into it, 70 years old disabled and a perfect past time to build my own stuff for my little farm. Thank-you. very interesting..

I love that you remembered to sharpen your hand. I can't tell you how many projects I've had to scrap due to dull tools

Strapped in with hat on.

@stephenwallbank615

5 жыл бұрын

Better than strapped on with hat in 😂😂

@procyonia3654

5 жыл бұрын

But no pants to be found? You are a savage!

That 1000 thou' punch was no editing trick, 2:20 look at his knuckles o_O

@necronomicon1472

5 жыл бұрын

Nice attention to details!

@MRGF78

5 жыл бұрын

1:30

@Bl4ckw0lf1

5 жыл бұрын

*BRUCE LEE REINCARNATED*

@scottgarloff1390

5 жыл бұрын

looked infected

I want tickets to be part of your studio audience! And is there an award yet for KZread video production, because, you sir, deserve an award! Thanks

I love your creative videos. I have not done any metal work since highschool. Good 20yrs now. I don't own a lathe but somehow you got me watching this video. This channel is beyond it's scope. Well done. Keep that chopping and sharp🤣🤣💪💪💪!

I had a CNC teacher many years ago (40) that only had a Bridgeport CNC mill, but taught lathe programming using it by putting the stock in the collet and clamping the tool in the vise. In this manner, it was programmed just like any other CNC lathe - tool movement perpendicular to the center line was X, tool movement parallel to the centerline was Z. At that time it was all mostly manual programming (we did use a system/language called COMPACT II using a dial-up modem to a mainframe for some "CAM" type programming).

@TheMetalButcher

5 жыл бұрын

If you only do a few small parts once a month and don't mind sitting on the floor, bridgeports make fine lathes.

I’d put you up there with Charlie Chaplin and Buster Keaton for mastery of visual comedy.

@stanwooddave9758

5 жыл бұрын

You do know that most of the people reading your comment, will be saying WHO THE HELL is Charlie Chaplin and Buster Keaton, I don't recall them walking on the moon.

The welding/brazing music at 10:28 made me picture ToT with a sombrero shaped welding helmet. I could watch your videos all day long and never get tired of them. They have the perfect mix of content and humor. Please don't ever stop making such awesome videos!

I just love you stopping the music during that wielding bit when your not wielding or grinding and for some reason it makes it so much better to watch

well i just learned that whiskey is a terrible fluid to go out your nose and a terrible drink to have while watching your vids. british sun tan, that's good.

@Rubenwil

5 жыл бұрын

Pause when taking a sip. No nose-whiskey and the Video lasts longer.

@robertoswalt319

5 жыл бұрын

That got me too.

@googleuser859

5 жыл бұрын

You drink alcohol, you're so cool.

@Tadesan

5 жыл бұрын

Oh man, snarfing whisky is the worst! It hurts so bad!

@leslieaustin151

5 жыл бұрын

BrannDailor Are all of us who give this comment a thumbs-up British, do you think? But it was a great aside! Les

I really enjoy the mix of the humour and video effect but I draw the line at ‘British suntan’ 🤨 But all said a done, another great video - thanks for sharing. 👍 John 🇬🇧😋

@stevewilliams587

5 жыл бұрын

After all is said and done ... more is said than done. Usually. Not with TOT obviously. 😉

@jmw5233

5 жыл бұрын

I'm a Brit and I laughed out load at that.

@mark314158

5 жыл бұрын

Sitting in an English garden Waiting for the sun If the sun don't come you get a tan From standing in the English rain

Dear This Old Tony, Your videos are absolutely fantastic, it's like you hit a home run every time. I enjoy every minute, well done buddy...

Although I'm no machinist in any way, I love watching and rewatching your videos for a few years now. Your style of editing just always cracks me up and has helped me through some tough times, so thanks TOT and keep up the good work!

"This is about to get crazy." Turns the dial to 11. Haha, so subtle and so hilarious!

Tony, regarding your bird nest problem, why not just use an end mill in your spindle instead? Your feeds/ speeds seem reasonably light enough.

AHHH, now I understand - first you have to hone your hand on the diamond hone to be able to cut the 1" CRS - THAT is what I have been missing!!! This changes everything - now I can make everything I ever dreamed.

The integrated CNC Lathe + XAZ CNC Miliing sounds like a killer combo. Congratulations to a yet another facet of your amazing adventures Tony!

TOT buying bolts... One question comes to mind: WHAT DID YOU DO TO THE POOR CAT???

British suntan! 🤣🤣🤣🤣 Greetings from rainy uk.

I don't usually comment on your videos, but there's sublime melancholy about your videos. I didn't know you could make machining so boring err I mean; organic and subtle, yet somehow completely captivate and inspire me to tackle projects in my own life, out of sheer practicality of the outcome, despite how laborious the journey may be. Nice job.

Watching your videos make me feel warm and fuzzy inside! I love engineering so much.

Connecting the motor shaft without a flexible cupling will cause the motor bearings to prematureley die because they will never be perfectly aligned to the bigger bearings and will get "directed" by them, eaven more so because its spinning very fast, you should realy implement a coupling before the expensive motor dies

@noallegiances8676

5 жыл бұрын

spot on, having been working with shafts and motors for almost a decade no doubt that motor bearings wont last long without a flex coupling...

@Realtime1501

5 жыл бұрын

In cases like this we would have a bigger hole and use a keyed compensation plastic bush

@BoB-Dobbs_leaning-left

5 жыл бұрын

I think the thing needs a 2:1 reduction planetary gearset. That would solve all the torque and locking problems and also reduce the need for removal of pants, as the lower speed will be less likely to cause unwanted evacuation.

@Ballba365

5 жыл бұрын

Yes true for "lathe" ops. However, a flexible coupling would not be ideal when completing indexing ops as this would reduce the rigidity between the brake (motor holding position) and the part.

@heitooooor

5 жыл бұрын

Please, ToT, see this comment and talk about this issue in the next video!

Ah, electrical tape will always be the perfect shop bandaid.

@makinwaves8147

4 жыл бұрын

Jack Burton so long as there isn’t superglue handy somewhere.

You sir are by far the most entertaining and educational machining guy on KZread. Much more than those wood working snoozers

The lack of ads keeps me watching this constantly. And I cant forget to mention it's well made!

2:00 broke my heart!

"A grinder and paint makes me the welder I ain't"

@robertoswalt319

5 жыл бұрын

Casey Thimm for the perfect manufacturing team you add, btf/ ptm. Beat to fit/ paint to match.

when see a good job, is old tony again.. its nice to see quality not just youtubers clearly wihout knowledge

Even the die grinder is humming along in This Old Tony's garage! 🤣

My British suntan is one shade darker grey than that paint, I’ll have you know dear chap.

Have you considered, say, an electromagnetic brake (steal the clutch off an automotive AC compressor?) to get rid of that last bit of play? Would be a good upgrade option for higher spindle speeds without needing as much holding force, if you ever find yourself contemplating a different motor that is.

TOT continues to entertain, educate and impress. Favorite home machinist channel, hands down!

Hi Old Tony this is Old Terry here, relatively new to Metal working, wood has always been my medium of choice, have a mini lathe which I have made many mods to and now milling with various attachments, like your channel and have just subscribed, good sound - good explanation and a bit of banter thrown in for good measure , more power to you Tony 👍oh by the way I'm in Scotland

@ThisOldTony

4 жыл бұрын

welcome aboard Terry!

Brilliant! You editing is getting pretty good too.

What are the chances of doing a video on a pneumatic brake for the new add-on? :) Maybe using it as a infinite precision dividing head, and solve the holding torque issue with that brake. Maybe even using a disc brake behind the chuck and a brake jaw to lock it. Would be a lot of fun + a handy tutorial for my next build :DDDDDD Awesome vid mate!

@j-man72b72

5 жыл бұрын

Electromagnetic brake would also work well. Electromagnetic so the chips fall off when the power is off. A pneumatic/solenoid operated pipe strap? Obviously this all assumes the play can't be eliminated in settings or other hardware... Contacting the motor rep/help line and finding out if the motor is capable of holding position without any lash would be my first step.

@xenonram

5 жыл бұрын

It's a steeper... It "locks" itself. (Enough to do the very light work he'd be doing with the router.)

@lukaradakovic5463

5 жыл бұрын

J-man72 b I think electromagnetic brakes have sort of like steps, they dont have infinite resolution so to say. They would rotate the spindle a few degrees towards that fixed position. Maybe there are EM brakes that dont have that issue but when i was looking around, all i found were these ones :/

@lukaradakovic5463

5 жыл бұрын

Andrew Delashaw Not sure now if it was a stepper or an AC servo anymore, but either way, locking itself in would be a much more reliable feature than depending on the motor to hold on for dear life :D

@Gottenhimfella

5 жыл бұрын

@@lukaradakovic5463 I like your disc brake idea, myself. It would need to be carefully engineered not to disturb the rotary location when actuated. This would allow the motor to be optimised for horsepower rather than holding force. I wonder if an encoder could be used to enhance positional accuracy?

Amazing work, all done in a hobby shop! Next project? I dunno, dedicated small CNC lathe with a spindle that has hydraulic closing action which will take collects? Internal tapers? Two speed gearbox? Maybe even your very own homemade spindle motor??? Automatic tool changing and dedicated turret????? So many more ideas looking at your videos!

I like learning a lot, and find myself looking at videos at much more of the normal speed and most of the times would not be what I was looking for, so end up fast forwarding all those not useful parts. Well I have no clue how you get me to the end of each of your videos at normal speed and without fast forwarding. Two thummbs up, great content and very inspiring.

How do you know I'm not wearing pants!?

@mikedrop4421

5 жыл бұрын

KZread analytics data.

Superbulous Tony, Thank you!

What a great hobby solution. Been wanting to make something like this for some years now, nice to see your approach on a mill turning head.

Absolutely fantastic video. I'm amazed how creative, and productive you are. Keep up with this quality content! Cheers Csaba

Love the Spinal Tap reference!

Those music playing tools must be so expensive!

@falkormoonchild4822

5 жыл бұрын

It's a spied audio from Germany. Costs? Well we'll talk about this later. So far: none to the slave author. Tool costs? Ask nasa/nsa. They probably won't answer. Maybe Donnie muppet will.

@williamchamberlain2263

5 жыл бұрын

CNC ocarina?

@Gottenhimfella

5 жыл бұрын

@@williamchamberlain2263 They used to cut vinyl record masters on a lathe.

@williamchamberlain2263

5 жыл бұрын

@@Gottenhimfella driven from the original recording on wax?

@Gottenhimfella

5 жыл бұрын

​@@williamchamberlain2263 That's going back a long long way. From about WW2 era, acetates were used. Live recordings could be (and in boutique studios, for maximum fidelity, still are) mixed straight to a recording lathe, on which a master disc was cut. Also known as an acetate, but it was basically a layer of special lacquer on an aluminium base. More usually, the mix would be captured on magnetic tape, possibly multi-track, allowing subsequent tweaks. This could then be output as analogue signal to the toolpost of a lathe, cut to an "acetate", which was plated with metal, then used to make negative metal molds or "stamper", which in turn would stamp vinyl copies in large quantities. The acetate itself could be played (with very high fidelity) on a standard turntable, tone arm and stylus, but would not last long.

You're beautiful Tony. It is a rare breed of youtuber can make 30 minutes fly by so quickly and still leave one wanting more. I am exceedingly excited to see what wonderful things you will create with the spindle!

That's freaking amazing! I'm a cnc lathe machinist and to see both of those work is awesome! I've been diving into live tool programming for yesr and a half now for c-axis and it's a lot of fun! Btw awesome job with the setup. Hoping to play around with that stuff in the future.

I like you,I like how you explain stuff,I like your sense of humor I....I subscribe thank you very much for the content :)

At 13:25...."Somewhere between battleship grey and a British sun tan" ....LOLOLOLOLOL.🤣🤣🤣🤣🤣🤣🤣

Always so impressive what you’re able to do. Inspiring!

The 3 days and figuring out where the wife left too is soooo on point. You better start with some flowers and ease into that next project.