Good stuff - smoothed out the low end on my KTM 500

Great information, keep the videos coming.

@ktmhusky

2 жыл бұрын

You got it!

Thank you for the videos, they're always quite perfect and right to the point, no bs. Quick questions, 1) will the bigger and fatter 13oz weight, you newly offer on your site, fit under the STOCK clutch cover with the new bolts you provide or will one need to grind material away to fit? 2) with a 13oz weight, which setting (1 , 2 , 3) do you recommend for the clutch? I'd definitely appreciate the lightest (1) setting, but I'm curious if the clutch will start slipping with the added weight. With 13oz, should one go for the strongest (3) setting to prevent slippage? Thanks again for your videos and products!

Great idea !

@ktmhusky

2 жыл бұрын

Thank you. It's a no brainer!

On the 450XCF and the 11oz weight does the rub line always happen? Or is it inconsistent? Would love to give it a go but don’t really love the look of the billet cover. Not sure it makes sense to grind down the inside on the stock one or what method would you use to widdle it down. Any insight is appreciated.

@ktmhusky

2 жыл бұрын

Just use the new clutch cover and it's not an issue. You can use the 13 oz now as well, with the new cover www.bestdualsportbikes.com

I just installed the 9 oz weight on my 22 exc-f 350. I removed the 3 steel plates that you mentioned but there is a circular piece and a rubber washer that they hold in place. I assumed they come out too since there’s nothing to hold them in. Did I do that right?

@ktmhusky

Жыл бұрын

Yes you did. Just like the instructions show. Thanks Mike

Question ..i was listening to a vid billy bolt commenting on using a flywheel weight 196 grams. Do flywheels weights react the same as a clutch weight.

@ktmhusky

2 жыл бұрын

Exact same principle, yes.

Iv heard you need to re map your bike with the weight. Was that true for you ? I’m on a 17 fx350

@ktmhusky

2 жыл бұрын

That would be like saying you need to re map for a different rear tire that is a bit heavier. Neither sitch is true. Can't be done though, on the style of clutch your bike has. Needs it though

Does a clutch weight help with a timbersled??

@ktmhusky

2 жыл бұрын

A lot of guys do use them, just to keep the revs up when letting off the gas in the snow. So guessing it helps

Will these fit on a 2022 GasGas EC300?

@ktmhusky

2 жыл бұрын

Yes