Great video, I'm afraid to do this repair because of the airbag. You showed me everything I needed to know and I think I can do it now. It doesn't look that hard. I'll let you know how it turns out. Thanks

Very thorough and informative. Almost the same exact process as the Scion xB I have. Airbag light is on, and cruse is out too. I bet this is the problem on the old Marquis as well!

this video saved my ass - thank you so much

Love your video’s

Very informative video. Thanks for taking the time to upload! I'm about to swap the clock spring on my '05 Grand Marquis. My airbag light is on and the car will randomly start honking on it's own sometimes. I hope that's all it is and I don't have to hunt down another wiring issue.

@412psekustomzllc7

2 жыл бұрын

Glad it helped

I LOVE THESE CARS 2 MY FRIEND. So much that this is the only car I've had since high school. My first was a 1994 grandmarquis, 2nd car 2003 grandmarquis, 3rd car ANOTHER 1994 grandmarquis, 4th car THE MARAUDER. Currently I have the marauder and one 1994 grandmarquis

@412psekustomzllc7

2 жыл бұрын

The Marauder is the ultimate panther. I have a friend with the sickest Marauder. Haven't had the luck of finding one for sale that I was able to purchase. Hopefully someday.

@carlel4219

2 жыл бұрын

Welcome to the Grandmarquis, Crown Vic Marauder Club.... sounds like the name of a law firm ....lol

No puller needed for steering wheel. Drip a little power steering fluid on he spindle to break the seal. Pull by hand. Works every time. And there is no risk of damaging the column threads.

@412psekustomzllc7

3 жыл бұрын

Great tip

@recon1071

Жыл бұрын

Thanks. I could not rent a puller that works for this and pulled it by hand with some effort.

@markchimmy

Жыл бұрын

Thank you very much for sharing this information! I am wondering if anything else like transmission fluid or wd 40 would also work? Please let me know Thank you very much!

@encinobalboa

Жыл бұрын

@@markchimmy ATF in our cars is the same as power steering fluid. I mention P.S. because it is easy to draw fluid from the reservoir. (When at the junkyard, I use a section of windshield washer tube.) WD40 might work but it is a solvent and a flammable spray that my junkyard prohibits. ATF works every time.

@markchimmy

Жыл бұрын

Thank you very much!

Thanks!

the airbag can become a projectile, not a trajectory, so the trajectory is the path it will take. make sure you edit your videos b4 you post them, lot of people will call you out on stuff. so if you look over all your videos you can find things like that.

Thank you !1. Great video

Does you think this part can also cause the cluster to stop working? Im also dealing with that issue on my 06 among airbag code 19 and no comms at my obd2 port.

@412psekustomzllc7

Жыл бұрын

No unfortunately the clock spring has nothing to do with the dash cluster. Cv's are known for cluster issues though.

I have a 2010 crown Victoria and recently I was driving and tried to make a right turn but my steering wheel just spinned in circles and my tires never turned I ended up in the middle of the street and couldn’t make any turn my steering wheel just literally spins and spins what do you think it is ? also my horn went off in the process

@412psekustomzllc7

Жыл бұрын

Ok so we had this issue in the past. There is a "U" pin that connects your steering wheel to the steering system shaft. I'd bet that either broke or came loose. One of the mechanics we had our CVPI at did work on the car and forgot to tighten that and the same exact thing happened. Driving down the road we tried to turn and nothing. The car went straight and we had to have it towed back to that shop to have him fix his mistake. That would be my guess. Hope this helps.

@Inthecu.t

Жыл бұрын

Thanks I think that’s what it is appreciate you 🤲🏾

Hey my ODB port is not working for my 2010 crown Vic anyone know what fuse may not be working? Thanks

Thanks you are awesome!

Need one for my 2003 grand marquis gs horn does not work or cruse control

good information but could be much shorter 5 minutes in before any instructions

Can I please get a link to the steering wheel puller?

@412psekustomzllc7

3 жыл бұрын

Here is a link to the tool I used in this video. Although I would recommend the one in the second link bellow as it is made for steering wheel removal. shop.advanceautoparts.com/p/performance-tool-3-1-2-2-jaw-gear-puller-w140/11931906-P This link is to a better puller that is made for steering wheel removal www.harborfreight.com/bolt-type-wheel-puller-set-62620.html

@08_crown_vic

3 жыл бұрын

@@412psekustomzllc7 thank you for that!

I'm guessing the steering wheel is not splined or you would have marked it

@412psekustomzllc7

3 жыл бұрын

Well the steering wheel/shaft have two flat sides where the steering wheel slides onto the shaft. Being that I knew the wheels were straight and the column locked when removing the steering wheel, as long as I slid it back on situated how I took it off it would be good.

What made u do it was there something wrong

@412psekustomzllc7

2 жыл бұрын

Yes everything on the steering wheel quit working. No horn, no cruise control nothing worked. The clock spring is what keeps the electrical connection to all steering wheel funtions.

@anthonyscvpi5154

2 жыл бұрын

@@412psekustomzllc7 oh okay

I put an OEM clock spring and horn still does not work. I touched power to the actual horns and they work. Checked all fuses and relays.

@412psekustomzllc7

Жыл бұрын

Ok, so you may need to check a few more things. Most horn circuits are ground triggered meaning when you push on the horn it makes contact with the metal housing and completes the ground connection. You may need to check the wire that is screwed to the metal housing of your steering wheel to make sure it is making a good ground to the chassis. The other thing that could be wrong is you make have a break within the wiring that goes to actual horns under the hood. So I would trouble shoot those. If you need any more help or advise let us know. We will do our best to help where we can. "Be Safe out there!"

@recon1071

Жыл бұрын

Thanks. I have not traced the wires from the horn back. I will do that soon. the horn does work. I touched it with 12 volts. there is only one way to put the clock spring in and all of the wires looked good inside the steering wheel.

1999 lincoln town car. disconnecting the wiring harness connectors under the dash is difficult.

@412psekustomzllc7

Жыл бұрын

Why are you disconnecting the harnesses under your dash?

@recon1071

Жыл бұрын

The wiring harness that comes built into the clock spring must be routed under the steering column and plugged into the same plugs that the old clock spring was plugged into.

It would be nice if they would put some hair around the spring loaded clips

@maxwelldayton9967

3 жыл бұрын

i guess it's kind of randomly asking but does anyone know a good place to watch newly released tv shows online?

@apollocorbin6279

3 жыл бұрын

@Maxwell Dayton I would suggest flixzone. You can find it by googling :)

@kysonjaxon8738

3 жыл бұрын

@Apollo Corbin yup, I have been using FlixZone for years myself :)

@maxwelldayton9967

3 жыл бұрын

@Apollo Corbin Thanks, signed up and it seems like they got a lot of movies there =) Appreciate it!

@apollocorbin6279

3 жыл бұрын

@Maxwell Dayton happy to help :D

Trajectory???? You mean projectile

@412psekustomzllc7

3 жыл бұрын

Correct, that is what I meant. Sometimes in the moment the brain doesn't snag the right word from your vocabulary. Normally called a brain fart.

You never said how to pry those 3 gizmos off..

@ezwa9979

2 жыл бұрын

thNx but I alreD did it.. one of my .50 repair vids has a gud trik 2 remUVng steering wEL(ofcoOrs, careful not to break air bag wiring though- only remove by a few “s)👋

Made it a trajectory? You mean a projectile. Stay with simple words. You don't look stupid that way.

@412psekustomzllc7

Жыл бұрын

Not everyone is perfect. I would suggest Karen that you troll social media correcting ever fault of a misused word. In my opinion that makes you look stupid. Unlike a mistake of using the wrong word. I think you have a bit too much free time on your hands Karen. I'd suggest a job or atleast a hobby. Keep in mind we don't make scripted video like so many on KZread. Our videos are done in one take and not scripted.