Usually I change Stretch values of the fabric to 60 and Bending values to 80. Then first 4 Buckling values to 0 and other 4 to 100. These settings create a pretty good stiff fabric. You can also use any of the Hardware fabrics and see if the look matches your expectation.
@bikashyadav71627 ай бұрын
How to make Bottom hem and sleeves hem smooth without sharp edges. please and advise
@digitalfashionsalad
7 ай бұрын
I recommend to create folds with 3 or more internal lines. then you can achieve smooth rounded fold.
@bikashyadav7162
7 ай бұрын
@@digitalfashionsalad Thank you very much for valuable advice.
@induja669Ай бұрын
I am able to achieve the Waistband effect as shown in video but the fabric color also changes along woth 2D pattern while adjusting the Skive. But in the vise, the fabric seen in 3D wndow remains the same. I wonder why it happens in my 3D window where the fabric colour is getting changed to Grey colour though I have white colour fabric applied to the top layer (same like how you have same colour in both Fabric 1 & Fabric 2, I have like that only). KIndly clarify me
@digitalfashionsalad
Ай бұрын
You can check the Trim Display for your 3D Window, could be that 'show bond/skive' is on, that's why you see the fabric turning grey. Mine is off, so it doesn't change color.
@induja669
Ай бұрын
@@digitalfashionsalad You were right, I checked off Skive option after which I was able to add the color I wanted to add and it worked out. Thanks for clarifying.. Also when we apply Skive, the wasitband happens to ballon out looking bulged. What should we do to flatten it?
Пікірлер: 9
Wonderful 👍🏼
how you made the stiff fabric ?
@digitalfashionsalad
8 ай бұрын
Usually I change Stretch values of the fabric to 60 and Bending values to 80. Then first 4 Buckling values to 0 and other 4 to 100. These settings create a pretty good stiff fabric. You can also use any of the Hardware fabrics and see if the look matches your expectation.
How to make Bottom hem and sleeves hem smooth without sharp edges. please and advise
@digitalfashionsalad
7 ай бұрын
I recommend to create folds with 3 or more internal lines. then you can achieve smooth rounded fold.
@bikashyadav7162
7 ай бұрын
@@digitalfashionsalad Thank you very much for valuable advice.
I am able to achieve the Waistband effect as shown in video but the fabric color also changes along woth 2D pattern while adjusting the Skive. But in the vise, the fabric seen in 3D wndow remains the same. I wonder why it happens in my 3D window where the fabric colour is getting changed to Grey colour though I have white colour fabric applied to the top layer (same like how you have same colour in both Fabric 1 & Fabric 2, I have like that only). KIndly clarify me
@digitalfashionsalad
Ай бұрын
You can check the Trim Display for your 3D Window, could be that 'show bond/skive' is on, that's why you see the fabric turning grey. Mine is off, so it doesn't change color.
@induja669
Ай бұрын
@@digitalfashionsalad You were right, I checked off Skive option after which I was able to add the color I wanted to add and it worked out. Thanks for clarifying.. Also when we apply Skive, the wasitband happens to ballon out looking bulged. What should we do to flatten it?