Very efficient sawmill, cuts both directions saving time and wasted energy in moving the saw head back and forth without cutting on the return. Also thin kerf so you can recover more wood and less wasted to sawdust.

Razionalizzazione, niente sprechi e tempi morti, questa è una macchina eccellente!

very fast, great investment

makes single edge machines look like old fashioned steam saw mills.

Now this makes sense , none of that banging and thumping gets transferred to the V rail

very fast..very effective

super maszyna dwustronna

How often do they have to change or sharpen the blade?

@CleeremanIndustries

3 жыл бұрын

The saw change interval depends on the quality of log that you are sawing. Most mills run theses saws about 4-5 hours before they change them and some will run for an entire 8 hour shift before changing the saw.

Is that a model 38 carriage

Demonhera do caralho 👏 parabéns

Quiero uno, cuanto cuesta instalado

Hello, how much is this machine?

hola soy de Durango México, este aserradero es una maravilla ¿me pueden cotizar uno?. saludos.

@encarnaciondiaz7181

4 жыл бұрын

Karen A. Rodriguez , Yo también quiero uno, soy de Guadalajara, JAL. Me dedico a la extracción de madera.

How is he cutting even when the log keeps jumping up and down as he cuts it? did he just forget to clamp log on a few or doesn't it have a way to grab log and hold steady?? like at 12.55...log keeps jumping up and down as its being cut....

@sgtblt0506

6 жыл бұрын

The log at 12:55 moving around is doing so because of stresses in the wood being released as the outer growth rings are cut away. Basically the ends of the cant bow up like a rocking chair rocker and don't sit flush on the bed, and as the band starts the cut the downward force rocks the end up even though the cant is clamped in the middle. The cut should remain even as long as the cant doesn't move forward or back relative to the plain of the blade.

@Krishnamurthy-fx4qy

4 жыл бұрын

That Saw Mill Awesome. I am Not Seen This Saw Mill Never Before. How Much Cost Of This Sa Mill. I am From India (Andhra Pradesh State). Please Send Me Full Details Of This Saw Mill, Photos, Brochor and Total Cost Of This Saw Mill With Catalogue.

Cuanto sale un aserraderos de esos puesto en chile

Why in the world don't you turn the log more? Never saw anyone saw all the way to the heart before turning the log.

@jeffcampbell6314

10 жыл бұрын

They are sawing on taper for grade lumber.

@mattcoblentz74

10 жыл бұрын

I was a grade sawyer for years and its been my understanding that sawing in the fashion we see here causes way to much stress on the lumber and also you loose to much value on the rest of your log.

@greghyman3708

8 жыл бұрын

+Matt Coblentz yeah he is offsetting the grain way to much. after drying much of that lumber will have sidebend

@mtl-ss1538

3 жыл бұрын

@@mattcoblentz74 New Zealand has big logging trucks. Gross Combination Masses of around 150-tonne. kzread.info/dash/bejne/i32M0byzlqWwe5M.html,kzread.info/dash/bejne/iKZ5mplwhdeWnqw.html&ab_channel=WillBishopTrucksNewZealand kzread.info/dash/bejne/hn2Npridf5Pac7Q.html -kzread.info/dash/bejne/nKmJxMGynbqZgLg.html&ab_channel=WoodleysNZ kzread.info/dash/bejne/qKCK1bmkZdO3YM4.html New Zealand- Classic Chip Trucking with 8V92TA-13sp.@ 40t kzread.info/dash/bejne/mWF20Nmycq6beM4.html NZ farmers block been logged,@57ton gross. kzread.info/dash/bejne/nJWfmdKRZtSpmbg.html

how much to set up?

@YanxRawk

5 жыл бұрын

I think it depends on the application and what you're planning on producing. We're just getting ready for an install into an already established circle mill. With all the support equipment and construction its looking to be quite the expenditure.

@ellismarch2713

5 жыл бұрын

Why turn log while you are still getting fas

Zing zing zing, done. ⏱NEXT?!?! 😲😄

.u

Seems slow