Hey JAY!!! I used to work in a lab, so here is some hopefully useful advice to keep you safe and maybe save you some $$$. TLDR: You can concentrate your isopropyl alcohol, and don't breathe in the fumes. If you want to concentrate your lower isopropyl alcohol so it can get to that 98%+ concentrations, you can pour some of your alcohol into a jar and add in lab-grade desiccants (look like tiny stone orbs)into the bottom. This will draw the water to the bottom allow you to draw up the concentrate at the top out. Note: Do not shake the jar afterward, you'll just mix it all back together... trust me, it was a headache when others would do that and it'd take up a couple days before we can use it again for our experiments. Additionally; avoid breathing in those fumes! It'll irritate your lungs and cause potential problems. If you need to work in an area like that, use a fan to help push the fumes away from you and your wonderful cameraman, or use a pressurized area to work in like a fume hood to stop you from looking over it and hurting yourself. Each solution you have like that should have a chemical hazard sheet that you should read and have at your work station in case of emergencies... for legal and safety reasons. We want you to make more content safely. Love your content and I am not trying to yell at you, just want you to live safely and happily with your family, and this helpful and supportive community. Stay sane and keep smiling.

@louiesupan7790

3 жыл бұрын

Replying to this comment so that jay could read it. Keep safe jay!!

@Norman_Fleming

3 жыл бұрын

What about denatured alcohol? That is what I have always used for cleaning electronics.

@josephroblesjr.8944

3 жыл бұрын

Bumpity to the tip it’s topity

@janericcabunilas1175

3 жыл бұрын

up voting this so jay will read it

@sidu5300

3 жыл бұрын

yo jay listen to this science man

Jay, I work in medical manufacturing and we use these exact ultrasonic tubs. You do NOT want to use alcohol directly in the tub, its a massive safety hazard for a number of reasons. (We get training about this shit, seriously) Instead, fill the tub with about 3-4 inches of water and then put the alcohol in a hotel pan or plastic bin inside the water. Much safer that way and it also helps control the (explosive) alcohol fumes you are experiencing there.

@PhysiKarlz

3 жыл бұрын

Same procedure in a physics lab.

@SYNEED

3 жыл бұрын

Mimimi im so good at safety

@PhysiKarlz

3 жыл бұрын

@@SYNEED or... concerned about someone else's health.

@CyrusDemar

3 жыл бұрын

Former electronics manufacturing worker here. And it cuts down on the waste IPA.. A lot!

@JackTalksTech

3 жыл бұрын

Yeah completely agreed. Was shocked when he said he was going to fill it up. Also, he wrongly said you can use it more than once per fluid. Definitely should be changing it every time.

Louis Rossmann's cat Oreo has some expert thoughts and recommendations on how to do this right.

@keithduthie

3 жыл бұрын

Here's a link to it: kzread.info/dash/bejne/aYJl2c9qZpzAf9Y.html

@frollard

3 жыл бұрын

Oreo really is overworked...deserves a vacation.

@woswasdenni1914

3 жыл бұрын

@@frollard there wont be one as long clinton is around

@DanielGomez-ye4oq

3 жыл бұрын

@@frollard Oreo can get as long as a break he wants to, he got fired.

@vitalice

3 жыл бұрын

why nodoby already tagged mr Rossmann in this XD?

"How jay destroyed his studio with an alcohol vapor explosion"

Ultrasonic cleaner tip. Put the card in a plastic bag and fill the bag with the alcohol. Then set the bag in the cleaner and fill the remainder of the tank with water.

@zuminlair92cp

3 жыл бұрын

**Distilled water**

@TheMrTape

3 жыл бұрын

@@zuminlair92cp Distilled water is only somewhat important when it contacts the parts you're cleaning.

@natas74d7

6 ай бұрын

@@TheMrTapejust in case the bag breaks or opens?

"Smells like steak." Somebody from Craigslist: That idiot thought my deep fryer was an ultrasonic cleaner!

@platypus_pratty

3 жыл бұрын

Hahahahaha! This joke is gold! :D

@ninez5740

3 жыл бұрын

Reminds me of fryers in hospitality working days.

@bits2646

3 жыл бұрын

Maybe someone will bring his GPU to McDonalds and ask if they can clean it in potato fryer :D

@AndyG73

3 жыл бұрын

A Scottish invention? A-la deep-fried Mars bars.

@casedistorted

3 жыл бұрын

That was funny.

"How to create a gigantic blast risk by using large cheap ultrasonic cleaner and flammable liquids"

@WillParker322

3 жыл бұрын

Got that Rossman degree?

PRO TIP: If you put the card in a sealable glass container (even with a plastic lid), you only need to fill the container with alcohol. The cleaner can be filled with demineralised water. The sound (ultrasonics) will pass straight through the glass. If it is like cleaners I’ve used before, the emitters are up the sides of the cleaner, so placing the card sideways will yield a better result. Imagine tiny blasts travelling from the sides to the centre. Keep in mind, you may need to flip the card inside the container as the effectiveness of the cleaning through the plastic lid will be diminished. Also good using solvents in glass jars for car parts!

@TheMrTape

3 жыл бұрын

Distilled water is only somewhat important when it contacts the parts you're cleaning.

@XTR_NEELAN

3 жыл бұрын

Edit brotip

@XTR_NEELAN

3 жыл бұрын

Use magnets for faster acquiring

@Yves95128

Жыл бұрын

You can also use a zip-lock (surrounding water type doesn't matters).

Why is this man putting a GPU in a deep fryer? Lol

@fishh9786

3 жыл бұрын

because that's one way of frying the gpu faster

@Rick020

3 жыл бұрын

Higher temps = higher FPS!!!

@JBattista91

3 жыл бұрын

cuz he's about to fry his opponents

@CrashForce

3 жыл бұрын

@@Rick020 I've had it wrong all along :O

@catbertz

3 жыл бұрын

Instructions unclear: I breaded and deep fried my 3090. Is ok? Tastes delish tho. 😋

Louis Rossmann: *anger noises*

@JustMe-lb8dz

3 жыл бұрын

wait why? xD

@martinocko9

3 жыл бұрын

@@JustMe-lb8dz ipa in ultrasonic cleaner bad, also flamable liquid that is heated up

@pheelix-

3 жыл бұрын

Again he does no research on the correct(safe way) to clean computer components. IPA does work, but this is not the correct or safest way. IPA is only used after the ultrasonic cleaning (not in the ultrasonic cleaner) to remove the Cleaner & Distilled Water. This is what you use to clean computer components in a ultrasonic cleaner: amzn.to/3agJpns + Distilled Water. Louis has a long video on this. kzread.info/dash/bejne/ZWGNvNlrZKyfdqQ.html

@trackno.1875

3 жыл бұрын

@@pheelix- Well in this particular case he follow the advice of a person who works for EVGA (Kingpin), i can't fault him for follow the advice on how to clean a gpu from someone who literally works for a gpu maker company, so in this one i would put the blame on that dude and not Jay for following the advice of a person that it's supposed to know what he's talking about. Blaming Jay here would be like blaming a patient for doing something that while it's wrong, it was erroneously advised by a doctor, there are certain professionals from whom you expect to have blind trust in, and you guys need to understand that Jay is not a professional...anything? he's a youtuber and follows advice on people who are supposed to know what they're talking about.

@pheelix-

3 жыл бұрын

@@trackno.1875 In the Kingpin video, Kingpin even says how dangerous using IPA is and warns those who think to use it. I will rewatch the video, but I don't remember Jay giving any warnings about the dangers of working with IPA or the effects a ultrasonic cleaner can do to someone at a microscopic level if they stick there hand in the tank whilie its on. And he should of learned his lesson from the Shunt Soldering Video he did and watch some videos from someone who works with this stuff everyday. When I got my ultrasonic I didn't just watch 1 video and then go at it. He really needs to do more research before trying to show people how to clean there PC Parts.

“I wish I had a clean toothbrush” if only there was a $300 cleaning device that was right in front of me! LOL that was a good one jay

Next time you see Jay without eyebrows and eyelashes, you know he was using his ultrasonic cleaner with 99% IPA and things didn't go his way.

you forgot to bread it in season flour and egg wash first but other wise looks pretty good i'd eat it

@goldfish_flex

3 жыл бұрын

Don’t forget to preheat the oven for 400* F and let it cook for about 25 min

@KontroldKaos

3 жыл бұрын

🤣🤣🤣🤣

@cl4655

3 жыл бұрын

@@goldfish_flex you can just play cyberpunk on max settings to heat it up

@goldfish_flex

3 жыл бұрын

@@cl4655 This method would result in above 400*F which isn’t what we want

@UnknownMystery21

3 жыл бұрын

No not egg wash you doughnut

pretty sure 99% isopropyl is a fire hazard. Louis Rossman did a good video on how to use one safely at some point.

@MattWeber

3 жыл бұрын

Yup, Nasa has a warning in their chemicals section about how it shouldnt be used in ultrasonic cleaners, since its creating vapor at higher levels and any small spark from electronics turning on/off (especially if using the heater on a cleaner), can turn the ultrasonic cleaners body into a small explosive chamber.

@malisa71

3 жыл бұрын

Even though I like Jay, this video can potentially kill somebody.

@MarshallSambell

3 жыл бұрын

He also could use distilled water it would be cheaper

@dododede875

3 жыл бұрын

Especially when temperature goes up. Fumes are most dangerous. If decent amount goes to air and find source it can cause explosion. Also be careful Jay. Scared me when he breathed in the fumes.

@MattWeber

3 жыл бұрын

@@MarshallSambell The entire point of this is to get water out from behind the components... so using water would kind of be defeating the purpose lol

"Worst part of painting is the cleaning" Can confirm as a 20+ year professional painter.

@warpig_mint9839

3 жыл бұрын

@ JayzTwoCents what kind of air brush do u youse ?

Jay: How to clean computer parts. Everybody: How to make a bomb with alcohol. Never ever use flammable liquids in things like parts washers. One spark and BOOM. There are much safer ways to achieve the same effect.

@SleepyFen

3 жыл бұрын

Jay: Renames the video in the wake of new information. I love this part of the tech community on KZread

@techdiyer5290

3 жыл бұрын

that's what i thought!! bc i have burned alcohol before so even if it wouldn't catch on fire in the ultrasonic clearer, maybe the alcohol would leave residue that would cause problems, with cooling the card.... He used 99.9% alcohol though, so he will be fine. Good thing Jay reads the comments. :)

@anticat867

3 жыл бұрын

I really would like to know if he intentionally tries to catch up with the verge.

@madmax2069

3 жыл бұрын

@@techdiyer5290 ahh what residue would alcohol leave behind exactly. There wouldn't be anything left behind to catch fire when it evaporates.

@m4ki9h76

3 жыл бұрын

@@madmax2069 / but ones using it should make sure to ventilate their room frequently.

Jay: "I wish I had a clean toothbrush." Also Jay: Has an ultrasonic cleaner literally right in front of him.

@PizzaPowerXYZ

3 жыл бұрын

*WE INTERUPT THIS COMMENT TO BRING A SPECIAL MESSAGE FROM IFIXIT!!! FREE IFIXIT BY THE MAKERS OF I FIX IIIT!!! GOT A CRAPPY GRAPHICS CARD?! THAT'S OK FIX IT WITH I FIX IIIT!!! IFIXIT HAS ALL THE TOOLS YOU NEED TO MAKE YOUR LIFE BETTER!!! GOT A DIRTY PHONE SCREEN?! FIX IT WITH IFIXIT!!! THIRSTY?! FIX THAT THIRST WITH I FIX IOIT!!! mmm, refreshing. USE IFIXIT TO FIX YOUR COMPUTER OR EVEN JUST UPGRADE IT! WOOAH!!! IFIXIT CAN FIX ANYTHING EVEN THIS OR THIIIS!!! GOT A PROBLEM WITH YOUR FRIEND?! FIX HIM TOO WITH I FIX IIT!!! HE'LL APPRECIATE IT! G U A R A N T E E D!!! (blah blah blah) To find out more, click the link in the description below. YEAH IFIXIT EXPLOSION*

@strichtarn3228

3 жыл бұрын

@@Calango741 he might've meant using the ultrasonic cleaner on an old toothbrush then using that

@AndyG73

3 жыл бұрын

He should invest in a small domestic unit to clean small items like tools, jewellry, watches, etc. That only needs water and some (for anything with glass/plastic/lenses) plastic holders/trays, which normally come with the unit.

@big_beed

3 жыл бұрын

@@strichtarn3228 yeah that's what I was getting at lol.

You will destroy that cleaner if you don't fill it up with water to the line, put the gpu inside a plastic zip-bag or glass container with the alcohol inside it.

@unluckyrgg

3 жыл бұрын

it is recommended to fill it to the water line but it might not break since i believe that unit doesnt have a warming element to warm up the liquids yes it can break but unless it has the warming element it will not be that high of a risk that it breaks

@Sandriell

3 жыл бұрын

@@unluckyrgg It has a warming element, Jay even said he turned it on.

@unluckyrgg

3 жыл бұрын

@@Sandriell oh i didnt hear that sorry then its fucked

@cutterboard4144

3 жыл бұрын

@@unluckyrgg i guess the water also cools the ultrasonic transducers. its not about the heating elements.

@camerynscott

3 жыл бұрын

You never put IPA in this cleaner, as it has an explosive element.. and many people have exploded laboratories from doing this he got lucky he didn't explode his studio.

Nick's enthusiasm is a mood

I really love these kind of videos, anything you're teaching, or showing new stuff like this that I've never seen.. just interesting

Even ultrasound isn’t enough to clean The Verge’s CPU, CPU cooler, and Motherboard.

@PizzaPowerXYZ

3 жыл бұрын

OH MY GOD THE THERMAL PASTE

@fattyfatchops

3 жыл бұрын

@Uranium 233 weed, booze and crack?

@Pumciusz

3 жыл бұрын

@@fattyfatchops Seems like my kind of childhood.

@liite5848

3 жыл бұрын

All of you newbies probably never built a computer and when you do you probably use $500 worth of parts give it a f****** rest already and move on with your lives you low IQ minions

@Dingusdoofus

3 жыл бұрын

@@liite5848 just built a $1300 PC 2 weeks ago. Most of it is eaten by Ryzen 5 5600x and RTX 3070 FE. You good mate?

Jay I have to say, after watching you dip the tip of your finger in the cleaner. Please DO NOT submerge your hands or any body parts inside the ultrasonic cleaner while it's running, unless you want arthritis a lot sooner than you would otherwise. The vibrations in the liquid will destroy the cartilage and stuff inside the joints of your fingers (or any body parts). I work on Medical equipment in hospitals and labs, and ultrasonic cleaners are one of them. This is one of the things they drill into our heads before we ever touch an ultrasonic cleaner.

you act so happy man.. keep that energy up! really appreciate your videos.. peace from germany ! :)

Awesome Jay! A few days ago I sent you a message exactly asking for a deep cleaning pc parts video. I dunno how I´m going to get a ultrasonic cleaner but you nailed it! Thanks for the video!

Next video: Jay installing a range hood over his table.

@steen8156

3 жыл бұрын

Unless it is an intrinsic fume hood it will most likely cause an explosion. This whole episode is literally a lesson in what not to do. You use a proper cleaning solution in the us cleaner, them use isopropanol to get rid of the cleaner and deox agent. What he just did here is very dangerous.

@chukkie0001

3 жыл бұрын

@@steen8156 That reminds me of somebody who used methanol instead of Trichloroethylene as a solvent and blew up a fume hood.

How to clean your PC: Google: *Shows this video* Bing: "Hose it down!"

@iainacosta7453

3 жыл бұрын

LOL \_(O_O)_/

@moltenhydrogen2218

3 жыл бұрын

i mean with retro boards you might want to, its common practice to even put your boards in the dishwasher

@libb3n

3 жыл бұрын

kzread.info/dash/bejne/Z2ihw5iOe7urmco.html

@purplescar69

3 жыл бұрын

Bing: Take you to dell website and add 4 years of warranty in the cart without the pc

@MarshallSambell

3 жыл бұрын

I hose down motherboards and graphics card PCB’s all the time with my garden hose, you just have to make sure everything like heatsinks is removed and then leave it in the sun to dry

This series with overclocking the GPU is really interesting, also it's very nice to see your development

Watching this...and then watching Louis' take on it. This should be good....there were a few points I was like "why are you doing X" already....can't wait to hear Louis.

I can't wait for Louis Rossman's reaction video to this!

@niino4329

3 жыл бұрын

i remember how he talked about not complaining to him when you had the dumb idea to put ipa into the ultrasonic cleaner and burning your house down. also, dont put your fingers into a running ultrasonic cleaner. might destroy your bones.

@steen8156

3 жыл бұрын

This video scared the shit outta me. KZreadrs do some of the stupidest stunts.

@derchesten

3 жыл бұрын

Yeah wasn't Louis' method using distilled water instead then a soak in ipa to displace the water away? Anyways it's Vince's fault, so go hate on him lol

@steen8156

3 жыл бұрын

derchesten are you sure Vince told him to use isopropanol in the us cleaner? The guy strikes me as a smart cookie, where jay is entertaining.

@derchesten

3 жыл бұрын

@St een you're right, seems totally out of character for Vince, he's literally a hardware surgeon. Jay most likely misunderstood Vince's instructions. But in 4:30 Jay says "it is my understanding after talking to Vince that this is appropriate for thinks" lol I'm slightly suspicious

He bought a JACUZZI for his gpu how nice of him

@Karottenbrot1

3 жыл бұрын

You mean a JAYCUZZI😂

For the record, pure water just like alcohol is non-conductive. It doesn't evaporate easily like alcohol though.

@xitywampas

3 жыл бұрын

Lewis Rossman uses demineralized water on all the MacBooks. If they can survive it an EVGA graphics card can too.

The ultrasonic cleaner be like: "Do you ever feel, like a plastic bag?"

Tomorrow’s video: JTC overclocks the supersonic cleaner

Linus cleans pc parts using a dishwasher. Jay cleans parts with a bomb. Lol 💣

Your vid came just in time! :)

Awesome video Jay and friends

Turns out, that professional overclocker? He knows his stuff and what he is talking about. Who knew right?

It was horrifying watching him almost blow away a $1500 graphics card like it was a wayward leaf.

@seanthompson6720

3 жыл бұрын

it's a Kingpin edition so worth way more than that, but it is also designed for the purpose of extreme overclocking

@sespa7867

3 жыл бұрын

Good name for a song or band that lol

A trick we use in RC to clean bearings. Fill USC with water. Then Using a smaller container fill that with your cleaning liquid and put it in. 2 benefits less risk of combustion of agent and less agent needed. I use a beaker for bearings, but any material for smaller container will work, plastic, glass , etc

@arthurmann578

2 жыл бұрын

Now THAT would have definitely been a MUCH SMARTER and SAFER thing to do than what they did with the 99% alcohol which is EXTREMELY FLAMMABLE out in the open!! 👍👍

Thanks this guide is what I needed.

For the love of everything that is holy DO NOT follow jayz's advice in a closed or poorly ventilated room and make absolutely sure not to sniff to close to the IPA bath, at that concentration and quantity the vapors can irritate your airways and eyes. You can actually pass out from this and never wake up.

@comicaldays

3 жыл бұрын

Usually, he states that his studio is well ventilated but yee... It's a yikes that he didn't mention that.

Substitute title: JayzTwoCents sniffs a couple tablespoons of 99% alcohol

Very interesting video. Enjoyed it quiet a lot.

That is fun, I enjoyed watching this.

Finally! Someone is using ultrasonic cleaner too for cleaning computer parts!

@Kazrayel

3 жыл бұрын

We use one to clean motherboards at our repair shop and this is correct. There's special deionized water that you buy that's way cheaper and works just as well

Now imagine someone lighting a match 6 feet away

These are really fun to watch, wouldn't mind some more of this even after 31 days of techmas

Thank you for this video.

Never this early. I was expecting it to be jayfourcents

Should've thrown the brush in with the card.. you would've had a clean one to use 😆

When the camera zoomed in, while brush cleaning the board submerged, i could smell the alcohol they were inhaling 😂🤣 the things we do for tech

Hey jay love your content, you can use way less fluid by filling the cleaner with water, then using a zip lock bag for the card with IPA in it. This was the gross stuff stays in the bag and doesn’t get all over the ultrasonic cleaner.

Well ultrasonic cleaners WERE available until the scalpers saw this video. Thanks Jay

@JDillander91

3 жыл бұрын

Good try.

Jay, you know 2020 is never going to end so these daily uploads will have to continue for eternity. 😁

Hi Jay, I study engineer and metals and we have these ultrasonic cleaner in our lab that we use, a good way to save alcohol/acetone(we use acetone), is to fill the machine with water and use a smaller container to just hold the thing you wanna clean and the alcohol, the fluid is just to transfer the ultrasonic, so you don't need to actually fill it with alcohol but rather just use mostly water. Also, the machine wont be contaminated and can keep clean cause the smaller container will catch the washed off stuff.

Welcome to the world of ultrasonic cleaning, Jay. Brushing/scrubbing between cycles is definitely the way to go for best effect. Also, for adhesives, acetone or paint thinner is better. I'm sure you'll find lots of uses for it now that you've got it.

That’s one drunk graphics card!

"Stop inhaling Jay" I'm pretty sure your body would object.

Might want to check the manual for your machine, some of them REALLY don't like being partially filled and will destroy the traducers. Another thing, if you can get one that is deep enough for a card to fit vertically it will help with getting the particles to move off the card and settle in the bottom of the ultrasonic.

Another good use for the ultra sonic cleaner is water blocks in your custom water cooling setups. Really gets into the microfins to remove any buildup.

"It burns, but it makes you know you're ALIVE" Yes Chef, thank you Chef. Though it's usually lemon juice. That's what reminds us. Haha

@vitalice

3 жыл бұрын

lol, i can relate as a cook XD lemon juice and the pinches of salt lol..make you think how did a manage to get so many lil cuts XD

8:20 While it has very low conductivity. Isopropyl alcohol can still kill electronics if you run them while they are still wet. You can never guarantee the purity of a solvent like IPA after you spill it on something

Fill the tank up as previously stated. Also you can partially submerge things for cleaning without any issue, if you want to put half your motherboard in then flip it for the other half.

Expected a fairly common "how to clean ur pc parts video" This caught me by surprise!

came from Louis Rossmann's channel

jay you're a smart cookie, you know about ventilation.....! good video but be safe!

not sure why, but that was so therapeutic!!

It's good to see some professional electronic cleaning techniques making their way in to the domestic market. Probably still be a while before you have heated wash tanks, 50C ovens and Vacuum ovens appearing though. I love seeing peoples faces the first time they see us cleaning their very expensive electronic equipment in a hot bath of alkaline. Even after over 20 years of electro-mechanical restoration, the look of raw panic makes me smile.

Jay: Jay stop breathing

did you read the instructions about the minimum level. It looked too empty. also putting alcohol in an ultrasonic cleaner is an explosive risk lol

11:12 Dude it all came off im so happy no Jay thats the alcohol fumes talking lol

That satisfaction after seeing gpu clean and fresh

last time i was this early, jay was still digressing 🤔

@robd3747

3 жыл бұрын

ABD... Always Be Digressing

"the memory is gone"

I have a lot of friends who do retro video game repair who swear by ultrasonic cleaners. I'm not that advanced yet, but I can certainly vouch for the isopropyl alcohol. Cool video, as always!

you should absolutely do this with other components a series of just these as a timelapse would be great

I'd rather watch old people f***ing than watch Jay smear his hand on a perfectly clean stainless surface again.

This gives me anxiety

ive worked in the haunted house industry for like 12 and the haunt i work at now uses an ultra sonic cleaner to clean all the air brushes

We used this style of cleaner for electronics in the USAF. If I remember this correctly (I separated from USAF in 1990) we used a coffee cone filter when we drained it so we could look for residue left. That told us how much work it did. Sweet memories. Thanks.

Anyone notice how suspiciously good Jay is with Vasaline?

@brodriguez11000

3 жыл бұрын

One would think silicone would be better than Vaseline.

@Frandish2

3 жыл бұрын

We have all tried the vaseline in one way or another :)

How to scratch a table: Step 1: 0:02

@owenbar5055

3 жыл бұрын

Pretty sure its on feet

11:59 when Jay almost Linus's the card of the table LOL

That’s a huge cleaner, and can’t believe the price you got it for...... Gotta say @JayzTwoCents you changing the title of this vid, guessing from Louis’s comment/vid; is COOL, & shows the humble/humility you have.....and not making big deal of “being wrong” etc.... (hope get what mean). Cool to everyone being adults, not having social media war and blah blah blah. Like you and Louis and the TechTuber community is TRULY AWESOME, and again, think your awesome for not pulling vid/comments/likes/dislikes.....and just edit title, making a “fun joke” of the situation. Congrats bro👍🏻👍🏻 Happy new year✌🏼

8:20 yeah and it's extremely flammable too!

@schwig44

3 жыл бұрын

extremely is kinda pushing it my man, we don't even burn it as fuel, and meanwhile there are things out there that catch fire if you look at them the wrong way...

LOL I GOT ADVERTISEMENT FOR CAUGHING. IS MY PHONE LISTENING OR WHAT?! 😂

@Xenoray1

3 жыл бұрын

Well, actual yes.

@masondegaulle5731

3 жыл бұрын

The answer there is “yes”, constantly

@heni63

3 жыл бұрын

@@masondegaulle5731 yee but this was still very quick and fast ..while watching the video... Listening to the video I watched

This process looks scary but end up pretty awesome

Was kind of hoping to see the gpu reassembled. Great video nonetheless!

Next video: How I burnt down my studio

1:48 triggered the hell out of me.

Jayz: An ultrasonic cleaner... Me: a deepfryer

That card needs some Tech Yes City love. but still good to know there are other methods :). cheers

If you want to use save on alcohol get yourself a shallow pan big enough for the gpu to sit flat, fill the pan with alcohol and put it on the rack inside. Then you fill the bath with water until its roughly halfway up the side of the pan. It will transfer the waves to the pan just fine and you then only need to clean small pans and use small amounts of alcohol. This is how we use ours in the lab to process samples.

Can I just put my entire pc in one of those?

@ivoivanov7407

3 жыл бұрын

Ofc you can. But that is not a good idea. IPA is s potent organic solvent. And may damage plastic stuff.

Hey Jay, I work at a Napa Auto Parts and we use Mac's Thermo-aid (part # 7100) to disinfect everything. It consists of 99.9% isopropyl alcohol. That might be a cheaper option.

Every time Jay says something and I hear one of those trade mark one word responses from Nick I immediately think of Corbin Dallas and Ruby Rod interview lol

Cleans it, immediately proceeds to spit on it by blowing on it

@deminybs

3 жыл бұрын

just a little good luck spit 😛

@jerrypowell6940

3 жыл бұрын

Didn't you know, Jayztwocents spit is good for 20 Mhz extra on boost clock.

Oreo is in shambles after watching this.

I used this equipment a lot a while ago. The sound is very unpleasant but it does its job. Well, I would recommend using nitrile gloves like the ones of my photo to protect the skin and avoid that dryness. Very interesting video!

I use an ultrasonic for my airbrush, comes in handy for sorts of cleaning. Really useful thing to have.