Who loves the color combo on this motor? 🙋‍♂️ Comment below who you think the special guest will be in the next video??

@kaydewhipple7696

2 жыл бұрын

Lookin good !! Love the colors.

@jefflisa2347

2 жыл бұрын

Robby Layton 🙂

God damn that view is beautiful

@decentgarage

Жыл бұрын

It doesn't get old

WOW Tim what a BEAUTIFUL looking engine, the flat black really looks good and sets off the tan...GREAT JOB man!

@decentgarage

2 жыл бұрын

Thanks so much Mark!

I started driving my 93 D350 this week after my 2nd shoulder surgery on 3/23. I hadn't been able to shift since before my 1st surgery back on 9/7.

@decentgarage

2 жыл бұрын

Had to feel good to be back!

Stuck in quarintine right now this channels keeping me sane right now keep up the good

@decentgarage

2 жыл бұрын

Glad you're enjoying. Where are you located that they still have quarantines?!

That color combo is killer Tim! The flat black looks more appropriate than the glossy black matted up with the tan color. Good job sir

Man I am happy this got recommended sweet build brother !

@decentgarage

2 жыл бұрын

Awesome! Glad you found the channel and I hope you enjoy!

Love the cummins beige and black. Ive been wanting to paint mine beige for that oem cummins look but didnt want it to look too plain. This is a crazy beauty combo you cant imagine until you see it. Good stuff, new sub.

Very nice, it’s gonna run good love the colors

Love the color combo. If I had the time, that's the color I would use. Keep up the awesome work. Can't wait to see the next vidoes.

@decentgarage

2 жыл бұрын

Thanks Ricardo!

Looks awesome Tim!

@decentgarage

2 жыл бұрын

Thanks Kyle!

Good call on the flat black vs the gloss. Looks awesome!

@decentgarage

2 жыл бұрын

Thanks Tyler!

Sweet looking engine, another awesome job!👍👍👏👏

@decentgarage

2 жыл бұрын

Thanks Darrel!

Looks Great Tim. You did a real nice job !👍

@decentgarage

2 жыл бұрын

As always thanks Ron!

Killing it buddy!

@decentgarage

2 жыл бұрын

Thanks Mike! How ya been man!?

@UncleMike1776

2 жыл бұрын

@@decentgarage busy flying and working on junk lol

@decentgarage

2 жыл бұрын

@@UncleMike1776 and cooking I'm sure! Tell the crew hi if you see them. Looks like you all have been busy on your own ventures lately though

@UncleMike1776

2 жыл бұрын

@@decentgarage that’s right! And will do bud

I’m here from Robbie’s channel.. and love Cummins

@decentgarage

2 жыл бұрын

Awesome! Welcome and let me know if you have any feedback for me as you're coming from an excellent channel 👍

Woah you are doing the same colors as me! You are just much further along. Im building up a 12V. Cant wait to see how yours performs

Wow, would ya just look at it!?

@decentgarage

2 жыл бұрын

Would ya just look at it!?

Engine looks beautiful! I originally picked some old school Dodge 2 tone colors for Long Bed Larry. Silver and midnight blue. With that engine, I am now second guessing myself. I think ...... You threw a curve at me. LOL I picked the Cummins beige for my OBS Fummins project but I'm not letting my paint combo out of the bag. Nice build man! Following along ......

AWESOME- over 10K. wonderful job

@decentgarage

2 жыл бұрын

🎉 i know i can't believe it!

I’m so impressed with the engine build. I wouldn’t trade my long bed for anything.

@decentgarage

2 жыл бұрын

Thanks Paul! It turned out awesome. Now on to body work

I just watched your video on the first truck you built. I didn't think you were in NP. You've 100% seen my daily driver then. Also, I picked up that 85 crew from out in NP

Looking good!🇺🇸🇺🇸🇺🇸🇺🇸

@decentgarage

2 жыл бұрын

Thanks Jim!

Awesome Tim ! The color combo looks amazing 👍🏻

@decentgarage

2 жыл бұрын

Thanks Mike! What have you been up to with your truck?

@mikestrucks

2 жыл бұрын

@@decentgarage I just replaced my clutch on my 4th gen. And I bought another 2011 with only 17500mls who needs some little attention because she didn’t run for almost 6 years....

@decentgarage

2 жыл бұрын

@@mikestrucks Any love for the first gen recently!? 😃

@mikestrucks

2 жыл бұрын

@@decentgarage I sold her to my friend 😢 but I’m searching around the whole Europe to find me another one !!!

Found you via Robbie Laytons channel. Nice work.

@decentgarage

2 жыл бұрын

Thanks for joining! Hopefully you enjoy my stuff as much as his

Decent 😎🙏🌞

@decentgarage

Жыл бұрын

Exactly! 💯

Here from LAB's channel! Thank Robby! LOL I own a couple Cummins Dodges and wouldn't drive anything else.

@decentgarage

2 жыл бұрын

Welcome to the channel! I love your screen name! 🤣

@geriatricginger

2 жыл бұрын

@@decentgarage Blame my wife; she came up with it about 10 yrs ago LOL

@decentgarage

2 жыл бұрын

@@geriatricginger it's awesome!

I see in this video that you installed the oil cooler, but there was no mention of whether you replaced this part: 3936365. It costs $15 and should be replaced with the new stronger version. The ones that Dodge had installed used a thinner wire spring and would not hold good oil pressure. When mine finally failed, my idle OP was less than 10 psi, at 2000 rpm I could barely hold 30 psi, and a cold start was also very low psi. After replacing that valve, my OP is 24 psi at idle, ~50 at cruising speed, and roughly 62.5 on a cold morning start. Most people are not aware of that valve as it doesn't come in a rebuild kit.

I’m putting a 77 dodge crew cab on a 95 chassis I’m gonna have to cut that firewall out a little bit so I’ll have room for the radiator and intercooler

You should paint it #190 blue gray metallic

@decentgarage

2 жыл бұрын

That's a sweet color for sure!

Love how simple you make it all seem, and how knowledgeable you seem to be on the topics you cover! Do you do any 2nd gen stuff, or only 1st gen? And do you do work for other people, or only your own stuff?

@decentgarage

2 жыл бұрын

Hey Jeff, I appreciate the feedback! I currently only have 1st gens, but I could see a 2nd gen joining the family in the future. Between my full time job and family I only have time to work on my own projects. I do try my best to help out via comments and Instagram DM as my time allows though. Best of luck!

@jefflisa2347

2 жыл бұрын

@@decentgarage Thanks for the reply! 🙂

CLLLLEEEAANNN!

@decentgarage

2 жыл бұрын

Thanks man!

I'm curious what you did to beef up the front end of this truck... For a Cummings engine ??

Nice! Are you still planning the high horse VE pump motor build? I just got my 93 d250 back on the road. Thanks bud, looking good!

@decentgarage

2 жыл бұрын

Yes, I've got all the parts to get it up to 400-450 HP. I'll be doing all that this month and headed to a local dyno event on May 7th. Glad to hear your d250 is back up and going! What were you doing to it?

@wlogue

2 жыл бұрын

She was just laid up needing an injection pump. I ended up borrowing a spare from a buddy, and installing it. I've been a marine mechanic for 20+ years, mostly way bigger stuff. I really like how much you accomplish with minimum space and tools! I put a gov spring and fuel pin in her with your assistance, Thank you very much!

@decentgarage

2 жыл бұрын

@@wlogue Awesome! Glad I could be of assistance. Let me know if you have any particular questions.

I noticed you are put high temperature paint on your new ATS manifold I bought an ATS manifold on and 05 years ago six years ago I just wish they would’ve told me to do that when I got it I figure while it’s ready to go on yeah but the thing looks real rusty now looks like shit I just wish a TS would’ve mentioned that I just didn’t know but yours looks really nice and you did a beautiful job on your engine this is six in a row jim From Kennerdell Pennsylvania

What about the killer dowel pin

@decentgarage

Жыл бұрын

I addressed it a few videos previous to this one

I've got a request for a video if you can or want to. My first gens speedometer isn't working and im not sure where to start with it and im interested to see what i can do to fix it and you're one that i can trust in your opinion, I was driving on the four lane today and i just had to guess my speed, Not very safe or legal so if you want to it'd help me out a lot. Thanks :D

What the dowel pin

I tried the promo code as I’m ordering a couple thousand dollars in parts from them for my p pump 12 valve rebuild but it didn’t work. Maybe I’m spelling it wrong.

@decentgarage

5 ай бұрын

Interesting. I don't know how long they leave the code valid. Call them and ask. They know who I am

Are you in Utah?

@decentgarage

2 жыл бұрын

Yes I am. Did the mountains give it away?

@famus801

2 жыл бұрын

@@decentgarage Yes I know our Beautiful Mountains when I see them. Great to see some Utah KZreadrs ! Great build keep it up I’m subscribing

@decentgarage

2 жыл бұрын

@@famus801 You just can't beat the views here. Welcome to the Decent Crew!

0:40 She's beautiful.

@decentgarage

2 жыл бұрын

Thanks!

Who puts oil cooler inside the engine ? Lol

The Chinese design

It's an engine, not a motor 🤦

@decentgarage

2 жыл бұрын

Oh oops 😬