Hey Neil Only just came across this on the channel today. Your height adjustment is exactly what I need for the rebuild of my drum sander. Right now I adjust the bed up and down, much easier to adjust the roller. Thanks for the idea and the inspirational channel. David

Thank you. I was searching for making a roller to make flakes with medium dough. I was thinking of two rollers and you have showed with a single roller. Thank you for the beautiful idea.

Ahh PVC, how I so love you. Great little update, especially since watching the first one. Good job Neil.

@PaskMakes

6 жыл бұрын

Thanks Rob! :)

I'm watching your videos back to back and loving every minute. Thank you for sharing the amazing things you make, and taking the time to make the videos so entertaining to watch. You are my new Jimmy Diresta. :)

@PaskMakes

7 жыл бұрын

Thank you very much Bernhard! High praise indeed! ;)

PVC was a great idea. Could be applied to drum sanders and other tools that need true straight drum rollers. Really enjoying your channel. Thanks for posting friend!!!

Excellent solution. Looks good to.

This is just brilliant.

Problem solved. Brilliant work Neil and a great video mate 👍🏼👍🏼

Thank you for sharing! Great video, I learned a lot.

Not a fail, only a chance to play that song again. Well done!

your videos are amazing! congrats!

Hi from Argentina... It is a wonderfull idea to roll puff pastry!

Great! Thanks for sharing!

Thanks for sharing !

Brilliant!

Gracias Amigo excelente video.

Great solution! Also great to hear you speaking :D

@PaskMakes

7 жыл бұрын

Thanks! I found it a little easier to talk to the camera this time - shame the audio was a little poor at the start though. I need to figure out the best settings for my new mic!

@GetHandsDirty

7 жыл бұрын

I didn't pay too much attention when I watched it first because I was going after the words but now that I gave it a second listen I can hear some hissing/static noise. What is your mic?

@PaskMakes

7 жыл бұрын

It's a Rode Videomic (shotgun), I haven't had chance to figure it out properly yet. I think, if I remember rightly I put the volume up in camera when I was talking as the first recording seemed to come out low in volume, even though I was only a couple of meters away from the camera. I will work it out - I just need to spend some time with it.

@GetHandsDirty

7 жыл бұрын

Humm... I have the Videomic Pro and it has a +20dB boost button. You can turn the volume in the camera completely down, with just one volume step and the mic will capture everything nicer with the +20dB. This way there is much less static noise than when recording at 0dB level at the mic and half way in the camera settings. The problem I guess is the sound board of the camera that might not be great. Just professional expensive DSLR's have good sound boards... But anyway, maybe your mic doesn't have that +20dB button but you can still improve the quality sound by getting the mic closer to the source. You can use some random tripod and get a way to attach the correct screw for the mic and position the tripod closer to you without interfering with the image. And get a high quality sound extension cable with the little male and female jacks (or go wireless but that might be too expensive for your case ahah).

@PaskMakes

7 жыл бұрын

Mine doesn't have the +20dB button, I decided to go for the intermediate version of this mic thinking it would be good for my needs but should have probably gone for the pro version. I will try it out some more and if I don't get any better results I will try an extension cable. Thanks for your help :)

thanks a lot men!

I wanna see if I can use this technique to make a machine that will die cut, emboss and print! I am very hopeful! Thank you for sharing your knowledge. May Allah reward you for your your generosity.

Wow that router jig is super clever!

@PaskMakes

7 жыл бұрын

Thank you! :) I saw something similar a few years ago - I really don't remember where but I logged it in the grey matter.

Much better 👍

i think this is a great idea for pizza doughs and breads and some savory

Thank you.

@PaskMakes

7 жыл бұрын

No worries Robert! :)

If it comes back again try 10 GA. aluminum pipe over a ply-stack core. Great design!

好厲害 家裡的壓麵機是上進下出式 我也想要一台平坦式的壓麵糰機 看過影片比較有概念了 謝謝分享

Very clever way of making a roller. I wonder if it could be used for intaglio or block printing.

@PaskMakes

7 жыл бұрын

Thanks! I think I got the idea from a video I saw long ago - really not sure where (something similar at least). I couldn't say whether it would work for block printing, but maybe though!

@DavidTheDave

6 жыл бұрын

I'm thinking the same thing.

@sebuteo

6 жыл бұрын

Me to!

You could roll bread dough into a pizza! Excellent video BTW.

@PaskMakes

7 жыл бұрын

Thank you Paul! Pizza dough with bits of clay on it - yum! ;)

@paulangeli9710

7 жыл бұрын

Pask Makes ha ha! I look forward to more of your videos!

@a.v.k.2852

6 жыл бұрын

Yes, it is the perfect dough roller.

Hi! It’s awesome :) And really good solution. Where can I buy the plans for making one myself? :) I search for them in your website and didn’t find them :(

Muito bom !!!

@PaskMakes

7 жыл бұрын

Obrigado!

Seems as though the original could have used a thicker bar at the center, too, so it wouldn't have deflected as much. It's probably doing it less, but still doing it.

Can you put 120 grit sandpaper and a motor on that?

Would you be willing to share the design plans? I'd love to make one as a dough sheeter.

Отлично! Если я правильно понимаю, это приспособление для изготовления керамической плитки. Можете снять весь процесс, от замеса глины до обжига? ... В любом случае, спасибо за ваши видео и мотивацию к работе руками.

@PaskMakes

7 жыл бұрын

Спасибо! Yes I believe that is what it is for - making tiles. I don't have any experience in clay I just built the machine.

What do you use the clay slabs for? Maybe it's in a video I haven't seen yet.

@PaskMakes

6 жыл бұрын

The Slab roller was built for someone else, I don't work with clay myself! I believe the main thing they use it for is making tiles. :)

do you have a materials list and diagrams with dimensions?

i think if you used a thicker shaft you might not of had such a deflection in the drum. other than that it is a great job! Keep doing what you are doing, its GREAT!!

@PaskMakes

7 жыл бұрын

Thank you William! Although a thicker shaft would've helped I believe it would still flex unless I went with something substantially thick. I think this solution worked out well in the end - I just didn't realise quite how much pressure went on to the middle of the roller when I built it. :)

so you reckon that pvc pipe will stop it from breaking again ? i kinda don't, try an iron pipe next time it fails

@PaskMakes

7 жыл бұрын

There is no way it will break again. The mass of the plywood roller fits that snuggly there is nowhere for the pipe to flex. For the pipe to break it needs to be able to bend to a certain point - which now it can't. ;)

@designfordeen

7 жыл бұрын

I also saw that a maker used a PVC pipe and filled it up with quick-dry cement to make it strong. This is what I wanna do too because this is easier for me.

I have a feeling that concrete filled pvc pipe would have been an option too

Why not fill the pvc with concrete or reinforced concrete? it will hold the shape better than a wood core and much easier to make

yeah - i should have waited to the end of this video to understand. sorry. no need to answer my Q from before

That should be a permanent fix. If not, then probably thick wall pipe is the next step.

your design can be used as a dough sheeter

Very good job but a rolling pin can do that too

Need so a contraption to roll nd laminate pastry dough.... Same concept i think 🤔

Do you have a plan for this on your website

I didn't find the plans of the slab roller on your web site. Aren't you buying?

why would you call this and other works 'CLAY SLAB" - no clay in it> - please explain i am not familiar with this term

How is the modified version holding up?

@PaskMakes

6 жыл бұрын

I only got feedback the other day and it's going great! :)

An axis of larger diameter would have prevented the break. Good job

@PaskMakes

7 жыл бұрын

Thanks for the input but a larger axle would've helped but wouldn't have solved the problem - unless the axle was very substantial. :)

Do you sell these? I would be interested

Yaaaaa....o sea hay que tener un taller para modificarlo.....

а что сразу не взять трубу металлическую круглую от того же стола

Sir, could you make me one of that for purchase thanks

Why not just use a smaller diameter and fill it with concrete?

Why not use a metal pipe?

Poco práctica

Olá me venda a planta