i bought one for $400 last year and it runs great no really rust or nothing nowhere it's a four-wheel drive automatic 91 lariat has the 351 engine in

Just bought an 89 F150 with only 14k miles. I’ve never worked on a Ford only chevys so I appreciate the video.

“For those of you without flags on the moon” got me lol

@elijahcrosby786

Жыл бұрын

same here 😂😂

@michaelgower2941

Жыл бұрын

I have this spinning truck please cause I have your master

@nicnadu0515

4 ай бұрын

Funny but did grind my gears alittle 😂

Thank you for taking such good care of my grandpas truck, glad it’s in good hands ❤

i bought a 1991 for $950 last year. I LOVE THIS DAMN TRUCK!

Glad to see people save these old trucks. Good call on replacing distributor cap, rotor. Check coil. And replace gas tank and sending unit. When these trucks sit for a long time these parts go bad. I bought 83 f150. Barely ran. Sat for decades. I initially changed oil. Put on a new gas tank. Distributor parts. And fired it up and ran beautifully. Drive it all the time.

I still see a lot of those eighth generation Ford F-series pickups out on the roads today. They were produced from 1987 through 1991.

Nice project. I always appreciate see how to approach a restore like this. I have a 68 suburban that has been sitting on my property since I parked it 20 years ago. I keep telling myself I’m going to get it going again.

I'm the opposite of Cash- for- Clunkers. I wanna save everything. Hahaa

I bought a 1988 F250 extended cab long bed diesel version of this truck 3 years ago. It had been sitting for about 8 years when I got it. She's a good runner.

It's like vice grip garage... Minus the talent, and comedy, and a subscription.

@GrumpyMonkeyGarage

Ай бұрын

I bet you're fun at parties! Doing what I can to save these old trucks and cars, any support to the channel helps me keep them from the crusher.

@sonatabella1390

2 күн бұрын

@@GrumpyMonkeyGarage I’ll subscribe :)

What a wonderful intro.

got the same truck except mine is a 302 4x4 5 spd manual. i am currently rebuilding the top end. it had blown head gaskets and a burned valve and it is 40 miles away from me so I can only work on it a little at a time. but it was only 300 bucks and I drove it home from the guys house at night with no lights.

Should have more views & subscribers. Keep up the good content can’t wait to see more

@GrumpyMonkeyGarage

Жыл бұрын

Thanks for the support! We appreciate you

I'm building a 87 f150 shortbed love these trucks

This was an awesome video you deserve way more subscribers. I was just looking today at a 1993 f150, different body style but i think this video is gonna make me do the unthinkable 😅

Always good to lube cylinders before cranking when it sits that long. Also this is my favorite body style of Ford, I have two of them, both '91s, but have the chrome grille and chrome headlight trim.

@kman-mi7su

7 ай бұрын

That should've been done and disconnect the fuel line then run it on an auxiliary fuel supply until the tank can be cleaned out. I have a 1988 F250 extended cab long bed 7.3 diesel, I bought a couple of years ago that had been sitting.

Always enjoy seeing you working on stuff, we need to get together sometime, so we can discuss our life choices.👍🤔😂😂😂 see you at the parts store soon.

I have a 95 f150 with the 5.0 (302) with 330,400 miles original motor,Trans and rear end

I'm also in GA, looking to do my very first restore. Hope the wife doesn't kill me.

I’ve got the same truck dude. Well not exactly the same. Yours has a fancy black stripe thing down each side. But mine is an 87 custom. Even the same color, I think they call it medium fire red. Yours was in a little worse shape than mine. But when mine didn’t start I went straight to the neutral safety switch. Fixed her right up. Runs like a top. These 4.9‘s are indestructible. Some jack ass spray painted my whole hood so right now I’m cleaning a big red cookie sheet with oven cleaner. Works pretty good to remove the spray paint,but takes a 10 gallon barrel of elbow grease. If you have any tips let me know buddy. Mine just hit the road two weeks ago. No complaints. Keep up the good work and the posts. Can’t wait to see what this puppy turns into.

great video

found out there is a difference between a starter for an automatic and a starter for a manual

Love that bugger lol

Great , I just bought the same truck with the same color I think , Desert Tan ? Same mine has been sitting for years .

i have a 1988 f150 that i cant figure out. I am getting fuel pressure to the fuel rail, but it will not start unless i put quickstart down the air intake. The injectors, relatively new, are not working?? I already tried the relays and searched for lose or corroded grounds, i dont think that is it. I am leaning toward a bad computer?? Any ideas?

300 4.9 is truly a work horse. You can't kill that motor why no timing chains its all gears. If you just freshen up the gaskets and do your oil change on time you can get million mile out of it

These 7th (80-86) and 8th (87-91) gen F150's are fastely becoming a popular platform as daily driver custom/street trucks because they one of the few classic you can still buy that are running and riving or could be for next to nothing for 2k or cheaper. The 300 is a great engine by itself but a 302 is a direct swap because they use the same motor mounts are the same and most of the wiring loom is the same.

@danbailey96

8 ай бұрын

I don't know why you would trade a 300 to a 302 300s are pretty much bullet proof and easily get 300 to 500 thousand miles if taken care of

@TheREALOC1972

8 ай бұрын

@@danbailey96 Parts availablity in the future, that's why, Sure 300 parts are available now but what about 5 years from now? Plus a 302 swap has alot more horsepower and are cheaper, you can can to any bone yard and pick up a 302 and tranny for $500. A 302 swap is more bang for your buck.

Lmfao thats me” cant stop myself from Buying giant pieces of 💩 “ hence why im here Researching

Any more on this project?

I got one a 93 f250 5.8 351w E4OD, 4x4 reg cab long box, 133xxx.

Thought you would do spark plugs and change gas and oil and lube the cylinders because turning over the engine.

Subscribed

Great vid, but laying on the starter like that can burn it out after a while, not like they’re delicate or anything, but I burnt up a starter doing exactly what you did

I'm 19 and I have an old 1990 f150 that I keep in clean original condition and I love it to death

Just saved my grandad's 89 Lariat from an auction, how much do you guys think it'd cost to get something like this running 'safely'? She's been sitting for the better part of 20 years haha hope I didn't just delete my savings.

What year is it?

Where do you find cars like these? Like did you hear about it on FaceBook Marketplace or Craigslist?

@GrumpyMonkeyGarage

Жыл бұрын

Word of mouth, I put my name out there as I'll buy anything, no matter how bad it is!

Dude, where is the update video?

The rings are probably stuck spray pb blaster in the cylinders and I guarantee it’ll start i’ve ran mine without oil for weeks was just fine

just bought a 1997 f150 long bed but just found out today probably needs whole new frame because of rust. How outrageously expensive is that?

@Jessejames5593

9 ай бұрын

Find another 10th gen f150 with blown motor and good frame and swap em up.

So this is my second time watching one of your videos. Am I reaching or am I hearing a lot of Bieri influence in your terminology? Either way, a guy can appreciate the entertainment value. 👍

Me being the teenage dushbag how wants to but big tires on it 🥸🤪🤦‍♂️😂😂😂😂😂

my old 89 im trying to restore but YESH its alot, its a old 5.0

I love anything to do with old trucks. Have you checked out a channel called adventures with Edna. I just subscribed to your Channel

Any follow up on this ?

@GrumpyMonkeyGarage

Жыл бұрын

Got a follow up video coming out in a week or two

@Dougdidwhat

Жыл бұрын

My 89 sounded the same on the start. Replaced ICM and cranked right up. Nice project to have.

This is 8mo old and I don't see the next update. It would be so bad to just watch you try and crank it with no power and basically not really do anything the whole video if you had the next one to actually see something being accomplished. Not a bad start, but definitely a crappy ending if you aren't going to make the next video. You should delete this one until you get it cranked. I did see your update saying it won't crank, but why have us sit through this one if it's pointless.

@jamesstuart3238

4 ай бұрын

Listen, I just bought a piece of shit truck too. Imma provide an update hopefully next week

How much did you pay for it, i just talked to a gentleman and he has one just like that same story been sittin for a while behind his house he asked 6 hundred

@GrumpyMonkeyGarage

Жыл бұрын

I paid less, but I am a hunter for a cheap car, and as you see in part two, it was probably too much.

It never got restored due to cost issues.

Your cameraman needs to focus better

Dude didn't pull the plugs and lube the cylinders after sitting for a decade 💀 those poor cylinders. Also doesn't understand that if cranking slows them wires are burning. Dude calls this a restoration 😂 it's more like a failed zip ties and bias plies cold start. You have sooo much to learn

You lost me at. afraid of rats and afraid of spiders

Doing a 12 minute introduction and getting the engine barely running is not a restoration. Stop with the bs click bait.

your cheating, your supposed to OVERPAY 50k on a new truck that gets 50 recalls & when the warrenty is over, have 3 yearly dealer visits for 4000 bucks each every year you own your truck.mr.farley needs his 5 million dollar bonus for robbing the public blind.

Best way to keep the paint/ patina protected? What works best with this paint?