nice progress , motor is looking good 👍

@vwnut1967

4 жыл бұрын

Thanks for everything Jason

Love the drill press set up as a wire wheel! 👍

@vwnut1967

4 жыл бұрын

It is handy and quiet. Thanks for everything Marci

Great job brother !!! Keep it up, your Senior DI would be proud ;).

@vwnut1967

4 жыл бұрын

He sure would. I hope he is watching. Thanks for everything Brother

Excellent job with the tin work, some of the screws were a real pain! Nice to see Patina relaxin!

@vwnut1967

4 жыл бұрын

Thank you very much for watching David

Ya Buddy, great work so far, and Music was an ear full. lol Cheers Dizzy.

@vwnut1967

4 жыл бұрын

Thanks for everything Brother

Always great to see progress. Thanks for the fun

@vwnut1967

4 жыл бұрын

Thank you very much for watching Mark

Another cool video..!! The fuel injection will be nice to keep if it proves to be reliable. If not, carb(s) it is..!! Thanks for taking us along Brian.

@vwnut1967

4 жыл бұрын

Thank you very much for watching John

Brian that header looked good but the We Rust Mites took her down very sad but you'll come thru!!!, Patina definitely waiting till the temp is in the 70's that's OK!!, Thanks Brian!!!; )

@vwnut1967

4 жыл бұрын

Thank you very much for watching Richard

If it is doable a new header makes more sense, no worries for a few years. Enjoying your wrench' with this fastback bro. My days of messing around with cars is long gone so now I enjoy watching others. All the best

@vwnut1967

4 жыл бұрын

I was told that there may be a NOS header in stock here so I will have to go looking. Thank you very much for watching Ken

My mom had a '67 fastback, European delivery, that had carbs on it; was always a problem to tune and sync them. I would opt to keep fuel injection if it was my project; will be looking forward to what you and Patina decide on it.

@vwnut1967

4 жыл бұрын

Stay tuned. Thank you very much for watching Greg

The flat black really looks good on the tin, nice job Brian!

@vwnut1967

4 жыл бұрын

I am really happy with the finish and color choice. Thank you very much for watching Raymond

Patina has the right idea. I hibernate in the Winter too.

@vwnut1967

4 жыл бұрын

She sure does. Thank you very much for watching Brian

A feast for both the eyes & the ears

@vwnut1967

4 жыл бұрын

Most certainly. Thank you very much for watching Ian

Looking good bud! I don’t blame patina, I seem to be more lazy this winter 🤷‍♂️ Can’t wait for the next video, thanks again for the great music as well.

@vwnut1967

4 жыл бұрын

Thank you very much for always being here and watching Gary

Fist song is Great.... Oh Yeah and im First here : )

@vwnut1967

4 жыл бұрын

Excellent I couldn't think of a better way to start. Thanks for everything Brother

@TedBishop1

4 жыл бұрын

your songs are all great Hazey ! The truth will still remain is one of my favorites

@HUBBABUBBADOOPYDOOP

4 жыл бұрын

*MUST BE NICE TO BE MUSICALLY GIFTED.* I'M GETTIN A GUITAR, AND JUST MAKE A TRACK OF ME AIR-GUITARING, BUT WITH A GUITAR. IT KIND OF SOUNDS LIKE _A_ SONG- JUST NOT _THE_ SONG, YOU KNOW WHAT I MEAN? NOT SCREAMIN- 1/2 BLIND. YOUR SONGS MAKE ME CRY, AND THINK. THANK YOU.

@HAZEYDAZE

4 жыл бұрын

Thank you..

You are coming into your stride, really enjoying your videos!

@vwnut1967

4 жыл бұрын

Thank you very much for watching Rusty Achers

It's like a giant jigsaw puzzle- compared to all the plastic and composites that surround the engine in modern cars.

@vwnut1967

4 жыл бұрын

Much better than plastic for sure. Thank you very much for watching HUBBABUBBA DOOPYDOOP

Looks great! I was thinking of a propane torch and high temperature aluminum solder to fix the header. That is if you can find the stuff.

@vwnut1967

4 жыл бұрын

Thank you very much for always being here and watching Elfen Magix

I always wondered how those engines looked without the tins. It got down to 30 degrees in Deep East Texas. Her Royal Highness Bambi Consuela. The Queen of Everything at Casa Bambi (the chihuahua ) refused to go outside and survey her realm...She gave me the same sleepy blinky look Patina gave you. Later, I put her pink sweater on her. She kept it on all day

@vwnut1967

4 жыл бұрын

I tell people all the time that the only difference between pitbulls and chihuahuas is size. Thank you very much for always being here and watching Ivor

Looking good. Thanks for the videos.

@vwnut1967

4 жыл бұрын

Thank you very much for watching Wander Feliz

Lookin good , to bad bout the header . Puppy smart stay where the heat is keep them bones warm and working , so glad Jan talked me into our fireplace for when the back get ache'in .

@vwnut1967

4 жыл бұрын

For sure she is the smart one. Thank you very much for always being here and watching IRON MAN

Fuel injection is the way to go there is alot of Info on the samba about it in the type 3 forum they work well

@vwnut1967

4 жыл бұрын

Thank you very much for watching airhead vw

I remember cutting a carb flange on the fuel injection intake... a progressive 2 bbl worked well

@vwnut1967

4 жыл бұрын

Great possibility. Thank you very much for watching Geoffrey

Please get Patina's DNA tested as I 'am pretty sure we must be related. If headers are a bit difficult to replace then I would opt for the new ones. Get those done and you have no worries. Looking good. I have always liked VW's but never had one. Great video. Keep them coming.

@vwnut1967

4 жыл бұрын

Thank you very much for always being here and watching D Butler

Looking good Brian...!

@vwnut1967

4 жыл бұрын

Thank you very much for watching John

To bad the header was sketchy other than that things seem to be going along well. Thanks for sharing your videos have become " automatic Likes " for me thanks for posting !

@vwnut1967

4 жыл бұрын

Automatic huh I will try to live up to the pressure Ted. Thank you very much for always being here and watching

Great video Brian looking good👍😊

@vwnut1967

4 жыл бұрын

Thank you very much for watching VW COL..

Header- As long as there's clean metal- scrub in acetone, then spread on 2-part JB Weld, pushing it into the holes, slathering it onto the "thin" areas. Let cure 24 hours. Sand smotth with 240-400 grit Wipe with acetone. High heat primer and paint. Cure with propane torch before hadling and installing.

@aarongrabowski5620

4 жыл бұрын

HUBBABUBBA DOOPYDOOP all that does is leave too many parts protruding into the pipe disturbing the air flow.

@HUBBABUBBADOOPYDOOP

4 жыл бұрын

@@aarongrabowski5620 Please don't exaggerate. Did I say gob it on, push it into the holes until it forms an obstruction? No. Heck- he could shove a rag, tied to a piece of wire- up the pipe, under the holes- then apply the JB. "Muffler Tape" can work well, if the products' directions are followed. Prep is key. Mechanically AND chemically clean the surfaces first. Muffler tape could easily crack with heat cycling- whereas JB weld should hold for years. Buy new, bolt it on. That's too easy. Fix what you've got if you can. $10 worth of epoxy & acetone- or $125 for some cheap knockoff.

@vwnut1967

4 жыл бұрын

Thanks again HUBBABUBBA DOOPYDOOP

Hopefully u can use the fuel injection because they run so happy when they are dialed in properly

@vwnut1967

4 жыл бұрын

Thank you very much for watching Aaron

There used to be a specialty screwdriver, with a clip that holds a strait blade screw on, until it gets threaded in.

@vwnut1967

4 жыл бұрын

Yep I have one and love to use it when working on carburetors sure would have came in handy with engine tin. Thank you very much for watching Brer Rabbit

Looking good keep it up brother

@vwnut1967

4 жыл бұрын

We will. Thank you very much for watching Frank

I wanna be a mad scientist and put a pancake in a mx5 and make it front wheel drive so I can hall azz :)

yep this was just what the dr ordered

@vwnut1967

4 жыл бұрын

I agree😀. Thank you very much for watching 4thGloryMonday

Great video Brian. Too bad Evapo Rust is so dang expensive. Could have just dropped that header pipe in a big tub.

@vwnut1967

4 жыл бұрын

It worked out ok. Thank you very much for watching Mark

@aarongrabowski5620

4 жыл бұрын

There would have been no header left if he put it in that stuff!!!

Thanks for sharing. Time for a TIG welder? Have a great week.

@vwnut1967

4 жыл бұрын

Thank you very much for watching Ernest

Nothing is better than a VW "Bug" infested Garage/workshop..

@vwnut1967

4 жыл бұрын

Best bugs to have I think. Thank you very much for watching Liberty Patriot

Brian did you think about a twin carb set up with more power?

@vwnut1967

4 жыл бұрын

Sure did Dave. Thank you very much for watching

Puppehs is not silly like hoomins. :)

@vwnut1967

4 жыл бұрын

Thank you very much for watching Brand-X

You can get parts for carbs if you need them. The VW injection system? Happy hunting....

@vwnut1967

4 жыл бұрын

True. Thank you very much for watching Ohio Hillbilly

@aarongrabowski5620

4 жыл бұрын

Parts still availiable if you know who to look through. Still think fuel injection is the way to go

Just wrap the exhaust and call it good. :)

@2trkpony471

4 жыл бұрын

Along those lines some JB weld with a fish patch?

@vwnut1967

4 жыл бұрын

Thank you very much for watching Phatty057

Injected

@vwnut1967

4 жыл бұрын

Thank you very much for watching Heather

The original VW Fuel injected nightmare engine;.. get 2 high quality Carburetors and never look back!

@vwnut1967

4 жыл бұрын

It is also a very to have one running and driving. Thanks again

Great video but I’m sure glad I don’t allow my kids to watch it or lol should say listen to it

@vwnut1967

4 жыл бұрын

Thank you very much for watching bitsnpieces77