CISCO AIR WIRELESS LAN CONTROLLER CONFIGURATION LAB part 1
Initial cisco WLC configuration from scratch ciscoexamplelabs.blogspot.co.uk/
Жүктеу.....
Пікірлер: 46
@77discoman7 жыл бұрын
4 days of pulling my hair out trying to get my 4400 trying to work with Air-Lap1131AG and getting nowhere. Watched your video, and now I can sleep at night!!!
@tomee6398 жыл бұрын
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.
@andis90766 жыл бұрын
A good introduction to WLC. Thanks for creating and sharing the video.
@tayyabjatoi86448 жыл бұрын
Very Comprehensive and Quick Video...Many Thanks....
@MrKishore5308 жыл бұрын
Nice vedio to learn many things about controller... Upload part 2...
@rider2758 жыл бұрын
This lab was really helpful. Thank you!
@wilytague6070
7 жыл бұрын
this guys is the best ever ... he was very detail .Thanks so much for this tutorial.
@Mac-ew1gv5 жыл бұрын
Thank you for making this video!!!!!
@hasansaiful89512 жыл бұрын
This is an excellent accent and wonderful topic, thank you so very much.
@ibrahimdirampatun39098 жыл бұрын
what a nice tutorial sir....was really helful
@christionorivai43355 жыл бұрын
thank you sir !! I love your explain
@manojkbn6 жыл бұрын
Great job, thanks a ton!
@yevgeni107 жыл бұрын
hi i have Cisco 2600 Airnet but i lack of Power supply v48 can you tell me if i can install and configure with POE?
@MrDpwilson3336 жыл бұрын
Great lesson!
@karzand84408 жыл бұрын
hi dear you have only part 1 to configuration or we have to wait for part 2 ....
@opethfan895 жыл бұрын
Hi There. Could you please elaborate on how you have your physical network set up? I have a 3560 L3 switch, a 4404 WLC, a LAP1262-N-A-K9 LWAP, and a host of other equipment. I live in an apartment so I've got their private network as my "WAN" (192.168.101.X). Any advice you could give would be great. Note - I have my CCNA so I'm comfortable configuring everything, I just don't know how you have your setup mainly to your WAN.
@Samir-cv5fk5 жыл бұрын
Hi. i have followed the steps however i am unable to ping the service ip address in order to login via GUI. Is there something i am missing. After the reboot of the box, i can be able to login with the username and password used. At what stage are the licenses required?
@johnnykerbaj48402 жыл бұрын
what a great video thanks man!!
@hisshadow95253 жыл бұрын
Tnx for this video guide!
@bipangoyal55727 жыл бұрын
How to enable email id and password in one of the wireless connection that has "open authentication"?
@s.m.ehsanulamin72352 жыл бұрын
in the router does it support switchport mode access /trunk command ?
@CanecaProductions5 жыл бұрын
Where can I download the WLC software?
@Majik19116 жыл бұрын
Thanks for a very informative video. Perhaps a small suggestion: Your mouth noises are quite audible and distracting. Not trolling, just offering a little feedback that might make your videos more pleasurable to view. Thanks again.
@vinayshankarkumar13946 жыл бұрын
Excellent !!
@AliHasan-pu1mt3 жыл бұрын
Hi Raj, thanks for this impressiveand informative video, I dont have muchexperience in the field of Cisco networking but understand all your video exactly, can I request you to either create new or if you already have(include link) video for Cisco 887AVG Router configuration for this same purpose
@johnkristian6 жыл бұрын
why set internal dns as secondary? Doesn't make sense
@igorguljas36016 жыл бұрын
I need to configure Guest ssid who have access only to interenet - not access to local LAN. Do I need configure on router (or switch) or on the wifi controler (and do you have example)?
@avijittalukdar6183
5 жыл бұрын
Are you still looking for the solution ? You need to create an interface with the appropriate VLAN info(the one you want to use for interface only) and then create a WLAN (say name Guest). In the WLAN make sure under Interface/Interface Group you select the interface that you created for Guest. On the switch side make sure that VLAN(the VLAN that is only used for internet ) is allowed in the up link of WLC
@05burky7 жыл бұрын
Nice Video. I have a cisco 2504 wlc I used the express setup to give a new management IP. Now, I cannot log on to the wlc via ethernet. Serial connection via console won't even work. It only shows connected on the hyperterminal but displays NOTHING endlessly. Someone help
@ashwathmendan7327 жыл бұрын
how to set alerts when AP goes offline on wireless controller 2504? any help?
@madtrax001
7 жыл бұрын
I believe only Prime Infra can do that. Or you use some 3rd party monitoring tools.
@sfurtado38 жыл бұрын
damn son, you got an 887 rooster! Does it eat the antennas on the router
@Ermandfa5 жыл бұрын
Any idea why my guest SSID will not get the correct dhcp scope? I am using an external DHCP server and my main SSID works fine. My guest SSID however gets the same vlan and subnet as my internal ssid.
@avijittalukdar6183
5 жыл бұрын
you need to create a separate interface for Guest. Under Guest SSD chose the right interface under interface/interface group.
@Ermandfa
5 жыл бұрын
@@avijittalukdar6183 Hi thanks for the reply. I figured out my issue. My LAN setup required me to tag the AP VLAN on native and everything is working now, thanks.
@skillsgyanitsolution Жыл бұрын
thanks its very clear
@jishadpeevees9510 Жыл бұрын
What if we have multiple aironet devices and how can we configure handover?
@ronalexander25776 жыл бұрын
I need help configuring for a church. can someone please help me
@LarsSchretlen2 жыл бұрын
Hi, Very clear and detailed lab. to bad that there is no Part2 :( Like to know how to config Security :)
@technologicalsupport24h517 жыл бұрын
I have problems detecting my APs, I follow the whole tutorial perfectly but when I execute the command "sh ip int brief" it does not show the APs that are connected in the network. Do I have to take an extra step ?? I work with a WLC 5500
@MemesCreatedByNida
6 жыл бұрын
sh ap inventory
@MemesCreatedByNida
6 жыл бұрын
show interface summary ping x.x.x.x show ap summary show ap inventory
@venkyvin6 жыл бұрын
Very nice, is there an email id I can contact you for questions?
@gardencitykickstartapplica89426 жыл бұрын
CISCO AIR WIRELESS LAN CONTROLLER CONFIGURATION LAB part 1
@sushilsingh213 жыл бұрын
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.
Пікірлер: 46
4 days of pulling my hair out trying to get my 4400 trying to work with Air-Lap1131AG and getting nowhere. Watched your video, and now I can sleep at night!!!
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.
A good introduction to WLC. Thanks for creating and sharing the video.
Very Comprehensive and Quick Video...Many Thanks....
Nice vedio to learn many things about controller... Upload part 2...
This lab was really helpful. Thank you!
@wilytague6070
7 жыл бұрын
this guys is the best ever ... he was very detail .Thanks so much for this tutorial.
Thank you for making this video!!!!!
This is an excellent accent and wonderful topic, thank you so very much.
what a nice tutorial sir....was really helful
thank you sir !! I love your explain
Great job, thanks a ton!
hi i have Cisco 2600 Airnet but i lack of Power supply v48 can you tell me if i can install and configure with POE?
Great lesson!
hi dear you have only part 1 to configuration or we have to wait for part 2 ....
Hi There. Could you please elaborate on how you have your physical network set up? I have a 3560 L3 switch, a 4404 WLC, a LAP1262-N-A-K9 LWAP, and a host of other equipment. I live in an apartment so I've got their private network as my "WAN" (192.168.101.X). Any advice you could give would be great. Note - I have my CCNA so I'm comfortable configuring everything, I just don't know how you have your setup mainly to your WAN.
Hi. i have followed the steps however i am unable to ping the service ip address in order to login via GUI. Is there something i am missing. After the reboot of the box, i can be able to login with the username and password used. At what stage are the licenses required?
what a great video thanks man!!
Tnx for this video guide!
How to enable email id and password in one of the wireless connection that has "open authentication"?
in the router does it support switchport mode access /trunk command ?
Where can I download the WLC software?
Thanks for a very informative video. Perhaps a small suggestion: Your mouth noises are quite audible and distracting. Not trolling, just offering a little feedback that might make your videos more pleasurable to view. Thanks again.
Excellent !!
Hi Raj, thanks for this impressiveand informative video, I dont have muchexperience in the field of Cisco networking but understand all your video exactly, can I request you to either create new or if you already have(include link) video for Cisco 887AVG Router configuration for this same purpose
why set internal dns as secondary? Doesn't make sense
I need to configure Guest ssid who have access only to interenet - not access to local LAN. Do I need configure on router (or switch) or on the wifi controler (and do you have example)?
@avijittalukdar6183
5 жыл бұрын
Are you still looking for the solution ? You need to create an interface with the appropriate VLAN info(the one you want to use for interface only) and then create a WLAN (say name Guest). In the WLAN make sure under Interface/Interface Group you select the interface that you created for Guest. On the switch side make sure that VLAN(the VLAN that is only used for internet ) is allowed in the up link of WLC
Nice Video. I have a cisco 2504 wlc I used the express setup to give a new management IP. Now, I cannot log on to the wlc via ethernet. Serial connection via console won't even work. It only shows connected on the hyperterminal but displays NOTHING endlessly. Someone help
how to set alerts when AP goes offline on wireless controller 2504? any help?
@madtrax001
7 жыл бұрын
I believe only Prime Infra can do that. Or you use some 3rd party monitoring tools.
damn son, you got an 887 rooster! Does it eat the antennas on the router
Any idea why my guest SSID will not get the correct dhcp scope? I am using an external DHCP server and my main SSID works fine. My guest SSID however gets the same vlan and subnet as my internal ssid.
@avijittalukdar6183
5 жыл бұрын
you need to create a separate interface for Guest. Under Guest SSD chose the right interface under interface/interface group.
@Ermandfa
5 жыл бұрын
@@avijittalukdar6183 Hi thanks for the reply. I figured out my issue. My LAN setup required me to tag the AP VLAN on native and everything is working now, thanks.
thanks its very clear
What if we have multiple aironet devices and how can we configure handover?
I need help configuring for a church. can someone please help me
Hi, Very clear and detailed lab. to bad that there is no Part2 :( Like to know how to config Security :)
I have problems detecting my APs, I follow the whole tutorial perfectly but when I execute the command "sh ip int brief" it does not show the APs that are connected in the network. Do I have to take an extra step ?? I work with a WLC 5500
@MemesCreatedByNida
6 жыл бұрын
sh ap inventory
@MemesCreatedByNida
6 жыл бұрын
show interface summary ping x.x.x.x show ap summary show ap inventory
Very nice, is there an email id I can contact you for questions?
CISCO AIR WIRELESS LAN CONTROLLER CONFIGURATION LAB part 1
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.