Cinema 4D Tutorial: Get an object to follow a spline
We quickly look at the align to spline tag...
Жүктеу.....
Пікірлер: 38
@Duhec86 жыл бұрын
I've been looking for this kind of a turtorial for ever. Every other turtorial is like 30 min minimum. So I don't have the time to search for that basic funciton. Therefore, I tip my hat to you, sir. An excellent turtorial, straight to the point and short.
@deendeon105 жыл бұрын
Great tutorial, short and to the point. Thank you!
@Kahnysis3 жыл бұрын
Thank you for this tutorial! I was struggling trying to figure out keyframing within Cinema 4D (brand new to this). I subscribed and will continue to watch your tuts.
@ViralKiller Жыл бұрын
If this video was helpful to you, please leave a small Super Thanks. The button is located at the bottom right of the video.
@jr002q20447 жыл бұрын
straight to the point and easy to follow! Cheers:)
@MrDevonParsons4 жыл бұрын
Thanks! Just what I needed.
@LearnABCTV5 жыл бұрын
I need this tutorial to finish my project.. thank you for your tutor
@imanjavahery9 жыл бұрын
Hey mate, thanks for all these tips you share on your channel , appraise it
@3dartstudent9733 жыл бұрын
Thank u so much for the clear to follow video
@BilyArtss9 жыл бұрын
you are the best
@coasterinc19877 жыл бұрын
hi i know this video is old but im looking for help with splines and controlling them... is there a way to draw like 3 controlable splines that have a slightly different length (example being a roller coaster with a centre of rail, left and right rails) and have it so if i move just the centre bone to follow the centre spline, but have 2 more sets of objects (wheel assembly) that will follow their own splines as an alignment but take their speed and position from the centre point and keep tangential to each other?
@maacdesmond7 жыл бұрын
thank you very much
@TheChromaKid6 жыл бұрын
Thank you very much
@clabarre307 жыл бұрын
hey i have a question, so i am trying to do this, and im not sure if a setting was messed up, becasue this worked for me yesterday, but now i can align anything on the spline, when i do this, the object doesnt connect and it just sits there. Even after i move the position, nothing. did i mess up a setting?
@prilee86458 жыл бұрын
thx a loot this help me full
@heii70968 жыл бұрын
is there any way to make an object follow two or more splines?
@dilettacomini5705 жыл бұрын
Thank you!
@pierridesign Жыл бұрын
Thanks
@JukkaTilli7 жыл бұрын
thanks!
@claramoramunoz59802 жыл бұрын
thanks! i didn't understand what the tangencial setting was for
@stilartman96713 жыл бұрын
Good job, How to record on the timeline?
@JoeBodego8 жыл бұрын
Thanks for this, however how can we clone objects along a spline
@MARGRA
7 жыл бұрын
did you found it out?
@andrearodriguez18396 жыл бұрын
Hello! how can i make my character face the way they are going while following the path ? thank you!
@dajzilla
6 жыл бұрын
create a null object and have your character "target" this null
@erikcarl23846 жыл бұрын
all well and good however when i actually try to keyframe it it dosnt work
@MegaHamour
3 жыл бұрын
same hahaha
@hz24543 жыл бұрын
niice , thank you
@bhojpurisuperhitsongs49496 жыл бұрын
sir please make many tutorial on tags cinema4d
@wsx7749 жыл бұрын
Simple and great.I'm a beginner and i was wondering There is a good book to learn C4D? (google translate)
@Quick_VFX
9 жыл бұрын
Valentino Siano videos are probably far better for learning than books...check out my beginner c4d tutorials
@alifboyka19946 жыл бұрын
how to make the object move automatically when we press play?
@IIIlllBravo
4 жыл бұрын
I know right
@davidweyland73715 жыл бұрын
It won't atach
@thescippngcat5 жыл бұрын
Hi, by far the simplest and straight to the point. But I tried applying it to a wheel and it won't work as great. T e wheel does follow the path/spline, but it won't spin. It does spin before I align it to the spline but stops doing so afterwards. Moreover, when I apply Tangential as it moves it flips front side with the back as it moves along. Any ideas? Thank you
@davidsatrio776
5 жыл бұрын
is it a car? i think you should check kzread.info/dash/bejne/ZJyYqNxthtmcpKw.html
Пікірлер: 38
I've been looking for this kind of a turtorial for ever. Every other turtorial is like 30 min minimum. So I don't have the time to search for that basic funciton. Therefore, I tip my hat to you, sir. An excellent turtorial, straight to the point and short.
Great tutorial, short and to the point. Thank you!
Thank you for this tutorial! I was struggling trying to figure out keyframing within Cinema 4D (brand new to this). I subscribed and will continue to watch your tuts.
If this video was helpful to you, please leave a small Super Thanks. The button is located at the bottom right of the video.
straight to the point and easy to follow! Cheers:)
Thanks! Just what I needed.
I need this tutorial to finish my project.. thank you for your tutor
Hey mate, thanks for all these tips you share on your channel , appraise it
Thank u so much for the clear to follow video
you are the best
hi i know this video is old but im looking for help with splines and controlling them... is there a way to draw like 3 controlable splines that have a slightly different length (example being a roller coaster with a centre of rail, left and right rails) and have it so if i move just the centre bone to follow the centre spline, but have 2 more sets of objects (wheel assembly) that will follow their own splines as an alignment but take their speed and position from the centre point and keep tangential to each other?
thank you very much
Thank you very much
hey i have a question, so i am trying to do this, and im not sure if a setting was messed up, becasue this worked for me yesterday, but now i can align anything on the spline, when i do this, the object doesnt connect and it just sits there. Even after i move the position, nothing. did i mess up a setting?
thx a loot this help me full
is there any way to make an object follow two or more splines?
Thank you!
Thanks
thanks!
thanks! i didn't understand what the tangencial setting was for
Good job, How to record on the timeline?
Thanks for this, however how can we clone objects along a spline
@MARGRA
7 жыл бұрын
did you found it out?
Hello! how can i make my character face the way they are going while following the path ? thank you!
@dajzilla
6 жыл бұрын
create a null object and have your character "target" this null
all well and good however when i actually try to keyframe it it dosnt work
@MegaHamour
3 жыл бұрын
same hahaha
niice , thank you
sir please make many tutorial on tags cinema4d
Simple and great.I'm a beginner and i was wondering There is a good book to learn C4D? (google translate)
@Quick_VFX
9 жыл бұрын
Valentino Siano videos are probably far better for learning than books...check out my beginner c4d tutorials
how to make the object move automatically when we press play?
@IIIlllBravo
4 жыл бұрын
I know right
It won't atach
Hi, by far the simplest and straight to the point. But I tried applying it to a wheel and it won't work as great. T e wheel does follow the path/spline, but it won't spin. It does spin before I align it to the spline but stops doing so afterwards. Moreover, when I apply Tangential as it moves it flips front side with the back as it moves along. Any ideas? Thank you
@davidsatrio776
5 жыл бұрын
is it a car? i think you should check kzread.info/dash/bejne/ZJyYqNxthtmcpKw.html
2021
Thank you!