I’ve have my 2013 300c for about 6 months. Since I’ve had it the connector has been out and I’ve always wondered what it was for. This is the first week of a heatwave. Plugging the connector in and having the car recirculate gives it an instant 10° difference. THANK YOU THIS WAS A BIG HELP!!

What a guy!! Part numbers too. I don’t currently own a car but used to do my own maintenance years ago. Love your videos!!

I HAVE STARTED WATCHING YOUR VIDEOS THEY ARE VERY INFORMATIVE AND STRAIGHT FORWARD I LIKE THAT ABOUT THEM . WOULD LOVE TO SEE MORE ELECTRONIC BASED DIAGNOSTICS AND HOPEFULLY I CAN KEEP UP . YOUR CHANNEL IS GREAT THANKS SO MUCH FOR THE VIDEOS HOPE TO SEE MANY MORE !

@ADVANCEDLEVELAUTO

4 жыл бұрын

I’m working on it. Thanks for watching!

Just wanted to say Thank you SOOOO MUCH for posting this! My 2013 dodge charger started doing this about 2 months ago and I tried a few things and saw this video and thought why not so I had to get the sensor from the dealership because auto zone didn't have any and claimed they didn't even know if they could get it so it cost me a little more but I was just grateful I didn't have to put it in the shop and spend even more. I'm leaving for the beach Monday and it will definitely be awesome to have full air conditioning!! Thanks again! You are awesome!!

Had this problem for a year, found this 3 minute video and got it fixed. Thank you

Good video. I have a 14' Charger R/T, and haven't had this issue yet, but now I have peace of mind over this.

Got my 2013 Dodge Charger back from replacing the thermostat and coolant - now the recirculate button flashes but will not turn on. Thanks for the very helpful information.

I've seen that more times than I can count. But I've never had a customer that wanted to pursue it. Thanks for sharing

@ADVANCEDLEVELAUTO

4 жыл бұрын

The part is relatively cheap. Thanks for watching!

So glad you posted that my ac not cooling well and my recirc button flashes. Hope this will fix

Thanks man. saved me from probably more than an hour of diag. even identifix has no info about this

Think you just diagnosed the problem in my vehicle. Thanks

Appreciate that i was about to get a recirc door actuator. I'll try this 1st 🎉🎉

EXCELLENT Info always enjoy what i see thanks for sharing cheeeers.

@ADVANCEDLEVELAUTO

4 жыл бұрын

Thank you!

Wonderful. Exactly what I need

Great one thanks for sharing knowledge

Great Video very helpful information💯 could you do a video on how to “calibrate ac actuator”? I have replaced it 2 times in the last 4 months and im currently hearing the ticking noice again, even when the car is off i can hear the ac blend doors circulating and now the same one has the same issues

Thank you for sharing your knowledge

Thank you, my 13 300c has been doing this. I didn’t know what the problem was.

@elguanaco101

Жыл бұрын

Nice

These algorithms for normal function of cab heaters can be complex. I believe the humidity sensor is there to prevent warm moist air from being blown onto cold glass, fogging the inside of the windshield. It has to be disappointing that when such a device malfunctions, you end up with a car that is worse than older models, held ransom by unnecessary technology.

Good video. Thank you for the info.

Excellent info. Thanks for sharing. 👍👍👍

@ADVANCEDLEVELAUTO

4 жыл бұрын

No problem. Thanks for watching!

I want to say thank you, you are the fkn man!! You solved me problem.

Deff helped me thanks!

Thank you! Did the job 😁

Very informative

Excellent!

Thanks for the quick tip 👍

@ADVANCEDLEVELAUTO

4 жыл бұрын

Thanks for watching!

@mikeprice8307

4 жыл бұрын

@@ADVANCEDLEVELAUTO what causes the defrost knob light to blink _2010 challenger?

I had this problem from 4 years Didn't know was that simple.

Bro you the f man Thank You so much!

Good job

right on time!! I appreciate you brother!

Holy crap bro. Thank you!!!! Jesus!!!! It's hot asf out here!

Thanks bro

Just saved me a trip to the dealer!! Thanks!

this worked for me

Thanks mzn

Does this also cause the ac to slow down and speed up constantly too? The recirculation butt9n is doing the same thing

We would check them with a hot cup of coffee lol watching for the change in the data pid

I just bought a 2011 300. Bought the part hopefully it fixes it.

@ADVANCEDLEVELAUTO

4 жыл бұрын

Let us know. Thanks for watching!

@renearambul6955

4 жыл бұрын

Did it work? I just bought a 2012 300S it had that problem i ordered the part and replaced it and it didn't work for me.

@Captain_Dark

4 жыл бұрын

@@renearambul6955 yea it worked for me. I know that after starting the car I have to wait a couple of seconds before I can turn it on which is normal. It also wont turn on if it senses a lot of humidity in the car.

@Captain_Dark

4 жыл бұрын

@@renearambul6955 where did you buy it from?

@renearambul6955

4 жыл бұрын

@@Captain_Dark i guess it was that it did sense humidity at the time i woke up today and turned it on and it worked perfectly.... i bought it from ebay for 50.

My van is 2012 and it's the ac light blinking is it the same part u change or a different one. My wife drives that van with my kids and they get very hot

Thanks for the video. Can you provide a link where you find the part? I have a 2011 Chrysler 300 with the same problem.

@wearethefamilyyay2319

3 жыл бұрын

Hey i have the same problem I also I have a 2011 Chrysler 300 did u get ur fix already?

@gbet7273

3 жыл бұрын

@@wearethefamilyyay2319 Hi! No, I haven't because I cannot find the part. I have searched in autozone, advance autoparts, ebay, amazon, and nothing. Did you had any luck?

@breadwinnerwolfman5686

3 жыл бұрын

It’s called a humidity sensor

@TheNightWalker131

3 жыл бұрын

@@gbet7273 55111389af was the part number I used. Bought it on Amazon for $50. KMT Humidity sensor

Had this problem since I bought my car used. Mechanic said it was working as intended. $60 part from NAPA and 5 minutes is all it took.

Will the check engine light be on ????

I have a 2012 Charger and I changed the blend door actuator on the driver side 3 times and it still making the clicking sound. What else could be the issue?

what if you replace the sensor and clear the code and the button turns on and off and it still doesn't recirculate

Will a missing cover cause the recirculation button to continue flashing after the sensor has been replaced? My sensor was replaced but the repair shop broke the cover and the button is still flashing. Can a new cover be purchased if that is the issue?

@yovanimartinez732

2 жыл бұрын

It’s only 15$ for the cover, 75 and some change for the sensor.

What would cause the snowflake button to block on a 2008 dodge durango. Now the button won't blink much less turn on.

Does this work if the heater only works on the passenger side?

Sweet

@ADVANCEDLEVELAUTO

4 жыл бұрын

Thanks!

Do you know if this sensor will also fit onto a 2013 Dodge Charger R/T? Also having the same problem with the blinking recirculation

@kikeariasarreola615

2 жыл бұрын

Did you fix you problem?

Hmm, I’ll be damned. I guess mine is bad in my ram 1500 and Im glad I went ahead and ordered me a new one because I’ve noticed for quite some time now that the only way I can put the HVAC into recirculation mode is to basically just turn off the auto climate control because if the ACC is turned on, my recirc button indicator light will blink like that too and not only that, I’ve noticed for quite some time also that whenever my windshield is fogged up or has a thin coating of ice on it when I go to remote start it in the morning, it may or may not turn the defroster on like it’s supposed to. I guess I can thank the fact that I decided to get Alpha OBD because if it hadn’t been for buying that, I would’ve never known I had this problem because out of all the times I’ve had to hook my OBD 2 code scanner to my truck, it’s never showed that code because the truck has never triggered a CEL and being that my code reader I guess only accesses the PCM, my Alpha OBD can connect to the air suspension control module if you’ve got air suspension, the body control module, the door modules, the instrument cluster module and all the other ones that runs these vehicles nowadays because that was how I stumbled upon the P1009 fault code. I was making a change in the body control module to, I think to enable my daytime running lights and one of the settings I had to change said to make sure that whatever fault codes came up after changing it to clear it and that’s when I noticed that code kept popping up and every time I would clear it, it would come right back so now I guess I know why. Thanks for posting this video on how to replace it and explaining how to know that you’ve got one that’s bad even if you don’t have alpha OBD.

Good

👍🏻👍🏻👍🏻👍🏻👍🏻

What kind of adhesive do you used to reconnect the humidity sensor to the windshield? Mine is totally detached.

@02au17

Жыл бұрын

Lord Chael what are you doing here??

I replaced the humidity sensor and the recirculate button now works, but the air is still not getting cold. Any suggestions? Maybe fuse?

@ourytmo1575

3 жыл бұрын

Fuse is usually the problem . # 10 isolated with #20 . i had the same issue . now it works

Can somebody tell me where the humidity sensor is on the 2005 300? It's doing the same thing but no video on where it is?

Once I replace the sensor, how do I clear the code? Or will it just start working after I replace it. I'm sure this is my problem on my 2012 Charger cuz sometimes it will go to recirculate mode only for a few seconds. Majority of the time it just blinks and will not go into the circulation

@burnzy7722

10 ай бұрын

Got the new sensor today. All is well. Took 5 mins to replace. AC works like a champ now!!!

Where would the part be found

What if the sensor is missing or non existent? I'm stuck, 2012 Chrysler 300 and it's not there at all... Help...

My 2013 Chrysler 300C doesn’t have that little box behind my review mirror.

My Ac light is flashing is this the same problem???😊

How do you pop it out without breaking something

@michaelconnelly1263

4 жыл бұрын

Its a little bitch for sure. A fine tip screw driver or knife. Just work it and plenty of patience 🙂

Have you come across this problem without a code?

Does anyone know where that sensor is in a 2012 journey

Circulating button keeps blinking put a new humidity sensor on button still blinking what can be the problem

Nice , but i have issues in my c300 srt8 , the ac is cold in driver side, but other side is hot 🥵 , does these Solution solve this issue

@ticocastillo1796

4 жыл бұрын

Had the same problem in my 2013 300c. Do you or did you have a loud clicking sound coming from the dash? If you did like mine I took mine to the dealership and they said actuator door was broken. Have to replace that for that door redirects the air flow. Their is a video online to replace it I guess it's common

@vracerv

3 жыл бұрын

Same problem, just bought car, fresh freon. Whats and where is the solution?

Link to the part?

Do you have any idea where I can get the connector from? I bought my car used and it didn't come with the sensor or the connector.

@MrChucky3006

2 жыл бұрын

I need one too, did u find one

@akeem19844

2 жыл бұрын

@@MrChucky3006 nope. But I no longer have the car.

@MrChucky3006

2 жыл бұрын

@@akeem19844 dang i need one , thanx

@akeem19844

2 жыл бұрын

I think you can buy one from the parts department at the dealership

I have a Chrysler 300 2018 but the button isn’t flashing , the air just isn’t turning on, what could be the issue

@brandonholmes3205

3 жыл бұрын

I also heard a clicking noise coming from the passenger side close to the radio.... I’ve owned a Dodge Charger before where the heater core needed to be replaced but there was signing like a wet floor due to antifreeze but this isn’t the case I don’t know why the heat or air isn’t turning on

Great diagnosis, do you ig page

@ADVANCEDLEVELAUTO

4 жыл бұрын

Thanks! I haven’t gotten around to doing anything with other social media platforms. I suppose I will eventually.

"It's cooling much better" The vent thermometer is reading 100 when he says that

They will do that if that outside temp is below a certain temperature also. Doesn’t necessarily mean the sensor is broken. They were made to function that way.

@gt7five7

Жыл бұрын

Naww my is doing that now in 80* so I fell in having the same problem getting it fixed today

I know mine been changed 4-5 times and it's flashing again!

My 2011 doesn't have a sensor there

What’s the point of having this sensor?

Intro music?

Never used ac in my life..cant imagine not accumulating my body to exist outdoors. My DNA may reach dork level.

How do you clear the code?

@tylerstallman721

4 жыл бұрын

Pull the negative battery terminal for a couple minutes

change the sensor but shit the circulation button works but the ac no longer works

I’ve replaced this sensor every goddamn summer for the last 4 yrs. wtf?!

Says he will show us how to do it and then...camera spins around......half of the process was already completed. Some of us need to see it from the beginning of the process.

Brother, have mercy on your family, I hated the car because of this humidity sensor, it made me crazy, its suit is like twice, I press it, it turns off A/C, turn off and start the car, the compressor starts again, what shall I do for him?