You can tell this fellow has taught a lot of classes. He has a conversational teaching style, a little humor, a calm demeanor, and you can't stop listening.

Bring back Bob Moffat! This man is the only one man on this channel that made worthwhile videos. Big sad hes gone

@chefboyarb

3 жыл бұрын

I saw this comment right after I thought to myself “I like him, I wonder if he’s still making videos” :(

@stevemartin6649

2 жыл бұрын

Red Beard made some pretty solid videos too.

@morganweller1491

2 жыл бұрын

Man cub and red beard are badass too man

@wetley09

2 жыл бұрын

I always look for his videos if I'm browsing this channel

Bob Moffatt is the Bob Ross of welding

@RickBaconsAdventures

5 жыл бұрын

happy little beads

@MrKotBonifacy

4 жыл бұрын

@@RickBaconsAdventures and nice even strokes : )

@TarmanTheChampion

4 жыл бұрын

I'm sick and tired of Bob Ross comparisons.... 😪🤢

@jon9148

4 жыл бұрын

I was thinking Alan Rickman. Able to critique, and criticize his own work without the slightest change in voice. Now thats confidence skill and experience in one place.

@clarence4343

3 жыл бұрын

I was going to say hes the jerry miculek of welding

i dunno about you guys but bob is cracking me up. he sounds like a great instructor/teacher

@Len_M.

7 жыл бұрын

Johnny Mango He reminds me a lot of all the instructors I had. It was fun to go in everyday.

@mrmidnight32

5 жыл бұрын

Obi-Shan Kenobi yea he seems like one of those old school quality to the point hard asses. Either you love him or absolutely hate him lmao Reminds me a lot of my old high school auto shop teacher actually.

@cameronsmith5968

4 жыл бұрын

Dude went to eat slag like it was a chip @ 3:24, had me chuckling hard.

@DCweldingAndArt

3 жыл бұрын

@@mrmidnight32 and I just love him. Not just for his personality/experience/humor....but for his passion for welding. Wouldve been an excellent mentor. Mancub was fortunate to learn from him

AC also gives the rod a cooling cycle that allows you run a higher amperage without overheating the electrode. AC is also less expensive because you are not using the rectifier in the machine, when you weld with rectified power you use up about 25% more power at any amperage.

@supermike2164

2 жыл бұрын

Thanks

@bigdave6447

2 жыл бұрын

Ac is .707 the power of d.c. RMS root mean square

@AS-ug2vq

2 жыл бұрын

Some rods won't run on DC. AC also helps avoid arc blows

@Cassiusisback

Жыл бұрын

modern inverter machines work different. they always rectify power and then convert it to whatever you want via mosfets. (solid state switches, that switch on and of more than 10.000 times a second).

@Cassiusisback

Жыл бұрын

@@bigdave6447 if its a sine wave output, most inverter machines run square wave ac. which makes it 100% of dc. minus the mosfet switching losses to be precise. more precisely, if the machine simulates that sine wave, that would make it .707, you still would have to substract the switching losses, since you still get a square wave pwm with a sine wave duty cycle :)

Bob moffatt is one of the most knowledgeable and funny welders I’ve watched and still has me stuck on these welding videos for years!!!

Had 2 pieces of pizza and a beer while watching your video...... Way better than anything on T.V!!!!!!!!!!!!!!

@tonyb7748

5 жыл бұрын

Had to drink 4 beers and throw up . Horrible teqnique awful amp selection and shit work prep.

@tonyb7748

5 жыл бұрын

Because you’re an expert welding instructor right? Eat farm boy.

@tonyb7748

5 жыл бұрын

Eat it farm boy, keep searching for greatnes on KZread . It sure isn’t coming from your stinger. 😩

@pitpotdeeerste

5 жыл бұрын

tv and movies are rubbish, all i do these days is watch instructional videos

@pitpotdeeerste

5 жыл бұрын

@SHERMAN YOUNG The news is just propaganda, i keep up to date by talking to ppl on the web from around the world. when you hear the news i just get triggered by the lies and misdirection. im so sad the hollywood NBC and the alphabet friends, they ruined all the blue collar heavy metalworks etc shows in to entertainment cliffhangers. Sigh. ill be hiding in my welding hood and playing with my new welder the rest of the week

I am 13 and have learned so much from you guys. Your videos are great.

@tomrose6292

2 жыл бұрын

It's great knowing you are interested in a trade that young .way to go young man that's great.

Learning fundamentals of AC stick welding was important when I went to welding school. At that time AC stick rod welding equipment was the only thing a poor boy could afford. After you graduate welding school the first thing you do is buy yourself the best welder you can afford so that you can start making money out of your own shop or basement or where ever you can. Tuition for any good vocational welding school is expensive and you will need to pay those student loans. When you teach someone to weld with a buzz box you teach someone to feed themselves!

@morganweller1491

2 жыл бұрын

Believe that and respect it cause I did exactly that gotta get that money 💲

@paulkurilecz4209

Жыл бұрын

One time I had to make an emergency repair. I had some welding rods. I hooked up some car batteries and used jumper cables.

@replyhere590

11 ай бұрын

@@paulkurilecz4209DC! A pipe welder recently sent me a photo of his battery powered Fronius. Pretty amazing!

putting Bob on as the full time video host was the best decision this channel could have made. his videos actually have useful take away unlike that "expert" who just made the videos feel like piss poor commercials and essentially offered nothing

@MrJimmyPayne

6 жыл бұрын

ultimatemonkey I highly disliked Mr.Tig!!! Bob Moffat is amazing truly a great teacher. Between Bob and Jody( welding tips and tricks.com) my welding skills gave improved greatly. Thanks Bob Moffat!!

@TheOldKid

5 жыл бұрын

@@MrJimmyPayne Bob and Jody are my favorites also. The best on KZread in my opinion. Mr. Tig and chucky are my least. All about attitude. Jody and Bob talk like one of the guys and not being an on screen character.

@ASAPJermz

4 жыл бұрын

Agreed.

@DCweldingAndArt

3 жыл бұрын

@@TheOldKid yep lol I like this true comment! :) bob and Jody are the only ones you'll see, out of those 4, at FABTECH giving classes to guys and interviews for students....wont see ChuckE doing that lol

@b.s.racing

Жыл бұрын

We need Mr. Moffat back, I'm just learning, no ppe or equipment, watching Mr. Moffat has made me feel comfortable an confident I can weld. I'm not learning for profit rather to weld for myself, I have a huge amount of welding to be done an the cheapest bid was $80/hr x 5 hours. From what I've learned from Mr. Moffat is that it's a 2 hour job an the bidder's welds are horrible. I feel confident that I can produce better results with what Mr. Moffat has taught me in these videos. As to the new guy who took Mr. Moffat's place, lol, he expects you to read his mind an doesn't really teach anything other than hey look at me, I'm cool because I'm better than you an this ridiculous intro to the video that makes me think I'm watching a crappy commercial an I want to "skip adds". I'm not dogging the guy rather pointing out factual truths I am experiencing, he's a poor teacher, point blank.

That info about the 1/8" 6010 and 3/32" 7018 running at the same amps was really insightful... Good shit bob

@jorda.2412

4 жыл бұрын

Not insightful but NEC.. .I tell yu what at 100' In air...100' from welder at base. +10 amp xtra on 00 cable

@samnottheotherone4363

4 жыл бұрын

I figured that out welding pipe.

Well for the question about one of the advantages of using A/C for stick welding: It eliminates Arc blow because the current is alternating from E(-)/E(+) at the rate of whatever frequency (in Hertz) the machine is set to. Bob here can adjust it on that machine, but that’s a rare bird, and so is the machine 😁

@markwildt5728

11 ай бұрын

Thank you

Best comment for me as a nube... "Get to know your rods". Researching rods is why I came here. Great video.

@melvinmariott8609

4 жыл бұрын

Yeah I check my rod every time I go to the bathroom lol.

@andymonk9505

4 жыл бұрын

Long arcing increases heat. I worked in 2 oil field tank factories in 1980.We used 6013 downhill on the 2 middle seams as a backup for the 2,7024

@andymonk9505

4 жыл бұрын

7024,5/32 on the outside seams. What a nightmare, 1 welder on the inside had to stay ahead of 2 wélders on the top of the outside while the tank was turning on a set of rolls and ventilation system definitely not adequate, after a couple rods on the inside you could not see anything until you start the next rod. 210barrel.The 100 barrel shop was much more efficient and easier on your lungs. I worked by myself on afternoon shift and the fóreman was around occasionally but only 1 seam to be welded on the inside with both ends of the tànk open. 1/4 7024 was just for the outside and he is right about running slightly 10° down hill, you could get 5' beads from 1rod.If you run too far down hill and you couldn't keep the slag behind you get pinhole effect. QC could fix the pin holés by pressure test, mark

40 minutes of Bob?!! Am I in heaven?? Great Video as always Bob! Loving all your content!

I had a welding instructor change my Life. after he showed me how to weld I've been doing it ever since at home or work. life changing actually saving skill

@davidthompson5108

7 жыл бұрын

I work with computers full time. I picked up an everlast welder on a whim and haven't looked back. Sometimes I even consider changing careers just so that I can get more arc time and learn more about welding.

@PeteBrubaker

6 жыл бұрын

I left a 12 year career as a graphics programmer after learning welding at home and machining at a maker space. I ended up with a job as machinist & maintenance tech after a couple years. The worst part of the transition was the pay difference. I had to make life changes including moving to make it work. The best part of the transition was getting home and not thinking about work.

@josephmorehouse6101

6 жыл бұрын

How often and what is the best way to clean hood lenses. I have trouble seeing what I'm doing. # 10 shade.

@robertshepherd995

6 жыл бұрын

Replace them.

@MetalJunkie87

6 жыл бұрын

spacystacy51 I had a very similar experience with my lead welding instructor. I had never considered myself to be the manufacturing/labor work-type. However, I decided to enter the Welding Diploma program at my local Vocational School. As it turns out, my instructor&I just clicked instantly with our work, personality, love of the industry, and all that.....Now I'm graduated, he left his position as the head of the program, and we are talking about collaborating on some work projects together. Truly life-changing, as you said!!🤘🤘

I did my mechanic apprenticeship on a city workshop, next door in the same building was an old school blacksmith. He did all the fabricating/metal repairs etc for the machinery etc. When laying down hardfacing on worn grader blades he would use 2 welders at the same time, strike arcs and lay the rods and holders (not the clamp one, but the ones you put the rod in and twist handle to lock) down, stand back and watch them both go. The object was to build back the worn cutting edges (early 1980's was cheaper to do this than replace blades every few weeks on the big graders)

This guy is not only a great welder, he has a good sense of humor and seems like he would be a great guy to learn from.

my Instructor was a older gentleman like you. He was always like burn down. we would get a hell storm if we didn't. He was really resourceful and a really smart guy. I am thankful for the old timers that care about what they are doing and to do it right and are good at what they do. Because like my instructor had said " we have to be good at what we do" that sentence has been my inspiration to be the best welder i can be.

42 minutes of pure quality content with a side order of humor tossed in on the side! You can't ask for more than that. Great job guys!

@geoff3656

Жыл бұрын

When Rob lifts his stick he has been known to lift something else ...

@replyhere590

11 ай бұрын

@@geoff3656I'll drink to that....

Bob, I really enjoy your videos. I really like welding with 6010. I think it is the welding rod of real men. Recently I saw some pictures of 6010 caps that were LACED. That really impressed me. You being a long time welder may have learned that technique. I for one with only two years of welding training and being 81 years old would be pleased to no end if you would show how that is done during one of your excellent videos. Thank you Sincerely, Walter Luikey The oldest active Union Millwright Apprentice in the USA

@bobmoffatt4133

7 жыл бұрын

Walter, congratulation!! Respect sir. I remember all those laced 6010, 7010 caps too. Some were big old figure 8's. We have some outside our building on gas lines that were done probably back in the 60's. I doubt many would know what we're talking about.

@davidmarquardt2445

7 жыл бұрын

When I was in welding school in the early 80's we started out with 1/8 6010's and 7018's. Everybody hated the 6010's because they like to stick. But they loved the 7018's because you could drag them and make a nice looking bead, and the slag came off so easy. But our instructors said you like the 7018's now, but when you get more experience and become better welders, you will appreciate what the 6010 can do filling gaps and open roots.

@idwtbam

6 жыл бұрын

Bob Moffatt In my 20s and I don't even know what I don't know. 😞 I just took welding as part of my carpentry apprenticeship and I am fascinated by how much science is a part of it. Anyway, I really hope you old guys record the things of the past in video or writing to be shared so the info isn't lost in my and later generations.

@gunchief0811

5 жыл бұрын

Walter Luikey dang! I feel like a high school kid! I'm 51 and just starting welding college man oh man you just made my day... keep melting steel!

@purebloodheretic4682

5 жыл бұрын

👏Much Respect Walter- Your Living Proof of the Saying, 'It's Never Too Late' - Keep the Sparks Flying Mate- Cheers 👍🍻🍺

At one point watching this video I went to flip my hood down just as bob was about to start welding. Great teacher does a good job immersing the viewer!

"Im on ac and it doesn't even sound like it" *BUZZZZZZZZZZZZZZZZZZ*

@woodrowstiewert9056

5 жыл бұрын

I said the same thing I was like TF it doesn't sound like ac

@sail4life

4 жыл бұрын

He's right though, I bet its a square wave instead of a sine. Sounds different all right.

@alexweeks4203

4 жыл бұрын

It sounds more like AC TIG, but probably quite different from say a buzz box or other power source that one might use for AC Stick welding

@chuckles9094

4 жыл бұрын

He cant hear it because the frequency is being recorded and Amplified with the camera microphone. Test this by grabbing your phone putting a Milwaukee or dewalt battery on a charger and hit record on your phone it should pic up a frequency that you cant hear without it....

@daic7274

3 жыл бұрын

Those that weld with various machines will know what was meant. The welder power supply is an inverter type not a traditional transformer /rectifier, so on ac welding a 60hz arc will sound quite different between the two types. Also the first welds done on ac were a higher frequency than usual, a sound usually found welding aluminium with tig.

Getting back into welding after 10+ years, I'd kill to apprentice under someone like Bob.

Just started welding a little over a month ago, and I love it. Enjoying the videos Bob, we also watch some of your videos in class as well. Very helpful

That slag peel. So satisfying.

@pitbullbite5835

5 жыл бұрын

Kodizzie nice fist lol

@FishFind3000

5 жыл бұрын

I wish mine would peel like that. I’m still learning so it’s just betting it with a hammer for me.

@andymonk9505

4 жыл бұрын

@@FishFind3000 The first thing is setting and learning the machine also control heat with the angle and arç distance and speed so you can almost pick up a lead and already strung out in a power plant, they run almost strictly 7018 on mild and abrasive resistant steel, jalloy is hardened for abràsiveness from the coàl.Its painted green ón the edge bécause hardened steel is brittle, it's quenched at a làrger grain structure, it's harder steel and less flexible. You have to be able to identify it so someone doesn't make D rings or lift lugs out of it and get someone killed or injured.

@ASAPJermz

4 жыл бұрын

If Bob bit it that would've made 2020 so much better! 🤣

Bob is my favorite to watch I've learned so much I thought I already knew... Never stop learning as a welder!!!

I do alot of welding at work. I taught myself how to stick metal together. I just learned a lot that I was missing. Thank you!!!!

Enjoy your videos.Been welding for 40 years and still learning.I like watching other people weld.

I have an ac/dc ark welder and no training. Wish I found your videos a long time ago. There is so much I don't know but I can come here and learn. Thank you very much! 👍

This guy's a MAJOR improvement... now I'll subscribe .... I've been welding since the late 50's and my own shop for 25yrs. .... I never get enough.

Just trying to wrap my head around all of the different rods I can use with my everlast welder and you've cleared it all up.

Bob is incredible, so helpful. He's got this Billy Bob Thornton style which is terrific. Don't ever change any aspect of this program, it's the best out there. :) Thank you for your hard work.

On the 3/32 7018, I loved when Bob said “Slag peel almost. It’s a beauty.”

Love. Those. Bloopers. This channel is excellent and you guys are doing a great job. I'm going to be teaching myself how to weld with an old Lincoln buzz box. You folks have been very informative. Thank you.

I been doing a lot more stick welding lately after a few months break doing mostly TIG. I notice that going back to stick (welding gate hinge brackets on steel fence pipes to keep the deer out of my Wife's garden) I was lightly holding the electrode about 3 inches back from the end with my non dominant hand and resting my forearm on the work piece. This allowed me to get much more comfortable and guide the end of the rod. Its hard to explain but my weld quality went way up while the rod was long.

Best decision I ever made was getting a powerarc welder and learning how to weld from youtube videos. It is such a great life skill to have. I only wish I had done it earlier in life.

You put out the best videos that I have seen yet. After just a month or so of watching your videos and practicing what you preach I have improved my flux core and stick welding by leaps and bounds. So down to earth and easy to watch without all the uptight "I'm a pro" b.s. Thank you for all of the great information. I would love to be good enough to do custom fab work one day.

Very nice video Bob. I love Your humor. "Get to know Your rods" is the best advice. Using the different rods on the right polarity and in the right positions will make so much difference to the quality of the weld. The other one is. Practice, practice, practice, practice,........and then some more practice. I will be runnning a lot of beads this weekend just because I love it and it keeps me in shape.

I haven’t welded in probably 15 years, took welding in HS 20yrs ago got so discouraged never really pursued it. (Short of a job making horse corrals). Now I’ve been bitten by the welding bug and watching a lot of these vids and Jody’s vids. Both have been so much more informative than I remember from HS.

"Today Bob will demonstrate the characteristics of different stick electrodes. He may even do some gas welding.." But seriously - I've been welding for a long time, and these demonstration/ tutorials are great.Some stuff I just plain forgot, and some I never knew.

The first slag peel with the 7024 was great! I love when I get slag peel with 7018

love all your videos!!!! I've been slowly teaching myself by watching all your videos and enjoying every second of them. I so wish I was able to take one of your classes because I know with hands on experience with an instructor like you I would become one hell of a welder and have a blast doing it. Thank you so much for taking the time to share your knowledge with the world for people like me who rely on your videos to learn all the different techniques and knowledge needed to pressue a path of welding, while being entertained at the same time!

@Welddotcom

7 жыл бұрын

Thanks for the support, Corey. We will be doing more classes in different locations. We will announce them in the forum, so be sure to register over there. www.weld.com/welding-forum

Your enthusiasm is infectious

After reading it in comments, somebody said exactly what I thought - Arc blow. Thanks for the video B.M.

i really enjoy watching Bob. great stuff Bob keep it coming.

Hello from Slovakia , learned/-ing a lot from your vidjeos. Thanks

@zamboner

5 жыл бұрын

I live near by, in Sokovia

I learned how to weld on an old craftsman buzzbox when I was 8 yrs old been sticking stuff together ever since saved my ass more times than I can count I wouldn't be where I am without this skill. Good content Bob excellent video brought me back to the good old days tryin to burn whatever I had!!!

We need more Bob vids . Please keep them coming.

(Why AC?), I think historically there was also the issue of wanting to use AC-only transformer machines. At one time you needed a mass of rectifiers, or some amazing rotating dynamo. I wish people had kept more of these historic welding machines around! Really enjoying all these videos, and the 7024 one-piece slag was impressive. Good stuff!

Excellent video! Thank you. From what I understand most inverter welder's don't work well with 6010. Some of them have a specific setting to run 6010.

I'm just starting to learn welding and this has been the *best* instructional video I've seen yet!

I think this is my 3rd time watching this video, so much good info. Just ordered an ahp 201. Hope to get by the end of the month with all the craziness going on. Can’t wait to start glueing some metal together, thanks guys!

Thanks so much for the videos Bob. I bought the latest version of this AHP having never touched a tig or stick welder and only spending about three hours with a flux core machine. I’m having a blast learning and your videos are a great help to beginners like me.

Great video, always learn something new. It's one thing seeing how things are done, it's a totally different matter knowing why things are done that way.

Just started to learn SMAW last friday. Love your vids and thanks for the info Bob!

You are an amazingly skilful welder and a great teacher, thank you so much for sharing.

Total newbie to welding. Never ever done it in my life until a month ago when I made 6 small spot welds (that are horrible I'm sure). Thanks for making this video explaining a bit about the rod numbers. I got a stick welder that I hope to learn a little bit so that I can fabricate small easy things. Looking forward to learning how to use it and to weld properly. Then I hope to advance to TIG so I can do a little bit of automotive welding for my hobby projects. I'm already fascinated by this.

@b.s.racing

Жыл бұрын

Horrible spot weld or not, you tried, that's a start to improve on an build from. Give yourself more credit, keep watching Mr. Moffat, don't matter if the video is not on stick welding, you are going to learn something that will apply to stick welding an don't try to learn all forms of welding at once, focus on what you are most interested in first, take your time an as Mr. Moffat says "Keep it simple.". I'm at the learning point, no ppe or equipment because of the economic crisis, it's not a race.

What a fantastic training video! I learned a semester worth on this one! Five star plus! And the welding part was great also ;).

I’ll be watching this one over and over again. Thank you sir 🙏

I love all the information i get from your videos...all the tips .thank you Bob Moffat.

Another great video. Keep in mind standard 7018 will not run on AC. You need 7018AC For that which is available at most places

@jackguess762

Жыл бұрын

Does the 7018ac on dc+ run the same as normal 7018 on dc+ ?

No arc blow and you can weld around magnetic currents/ magnets without it affecting your weld pool

I have that same machine in the back of my rig . . 1958 SA 200, Love it!

This guy is awesome, helps out so much, such a good teacher

That's was a good lesson on rod types 👌🏼 good laugh at the end too! You guys rock🤘🏼

a nother great video Bob love your straight forward honest approach and your dry sense of humor you should do a blooper video I bet it wood be great please keep the videos coming

@Welddotcom

7 жыл бұрын

Check us out on IG and Facebook. Blooper stuff gets released there fairly regularly.

I have always been a mechanic or production assembler. That is until 3 weeks ago. I got a job with a great company looking for a welder. I talked a good game and did a few passes with .045 wire on a mig and got the job. I am doing great there because of your videos. I have watched most of your videos several times over and want to thank you for sharing your life of knowledge. I couldnt have made it without your instruction.

As a fix it guy with a Mig and Stick welder, This channel is very helpful

Answer: AC welding produces virtually no arc blow (electrical arc wandering aimlessly or imprecisely) due to the alternating current welding process not causing induced stray magnetic fields that would otherwise plague the direct current welding process.

wonderfull wonderfull video...thanks from Portugal...thanks for sharing...

My favorite welding teacher!

Oh my days never laughed so much for ages such a shame to read that Bob passed away these are old videos now truly brilliant to watch and learn from my name's Dean my partner's account is attached to Google and KZread

@replyhere590

9 ай бұрын

Bob is still around.

Have you ever used the "torpedo" welders that the government used in the shipyards during WW2. It was an AC motor driven type that ran another armature for welding. Around my area there are literally hundreds of them left over from the war still in use. Very smooth arc and a joy to use. Lincoln also made one that looked like R2D2 that stood upright. and was a small simple welder that ran really nice also, It was a motor driven type just like the torpedo welder but much smaller.

@dennisyoung4631

Жыл бұрын

Yes, the “silo welder.”

@nodaklojack

Жыл бұрын

We had one of those old r2d2 Lincolns at a plant and it was well respected.

Lack of Arc Blow. AC because of it's switching action does not experience arc blow.

@bobmoffatt4133

7 жыл бұрын

Good call. Correct!

@BrandonSmith-wn9xw

7 жыл бұрын

I was thinking it was more like welding aluminum if the material it really dirty it would it would burn it out better at different frequencies

@BigRobFPV

7 жыл бұрын

neat, i learned something new, great to go back to your previous video on 6013 arc blow and watch it happen

@drivethelightning

6 жыл бұрын

Bob taught me this yesterday!

@r.a.8861

6 жыл бұрын

aside from that wouldnt it also be a more stable arc and tighter profile and control?

I've started doing some practicing on my uphill game using some 3/32" 7018, runs beautifully

Mr. Moffatt you sir are one cool instructor. Funny but get a serious point across. Very enjoyable to watch your videos.

that reaction to the slag peel made my day XD

Bob: “I went to go check the machine and then there was an explosion.” Me: 😂😂😂😂😂

@kdk200

4 жыл бұрын

Someone get the fume extractor 😂

@joshuathewelder24

3 жыл бұрын

kd k Lmfao😂

@Camcam5672

2 жыл бұрын

“ I feel better I tell you that I was kind of I had”😂😂😂

This guy's definitely feeling his oats today, he's just going off, I'm on the floor rolling, Too funny, good job and great instruction, keep it coming!!!!

I have recently gotten pretty addicted to watching your KZread channel. I have the opportunity to weld here and there at work just for the hell of it and I do so anytime I get a chance. I'm self-taught and I would say I can run a pretty nice bead for someone who has had zero teaching or anyone showing me what to do. I love the videos it is teaching a lot to someone like me who does not have someone to teach them but I have the opportunity to stick weld and I take it

Bob is funny as hell. I'd love to be a student of his.

@bobmoffatt4133

7 жыл бұрын

david lassell Come on.

@benbarnhart7375

7 жыл бұрын

Bob, do you think you will offer any more of your week long courses that you offered a few weeks ago? I'd like to take a week of vacation next year to attend if you will be putting them on again.

@bobmoffatt4133

7 жыл бұрын

Ben Barnhart Yes, I plan to offer more throughout the year.

I would imagine with ac the advantage would be a balanced heat, not punching through, may keep heat balanced more on thinner stuff, and would also help with arc wander and arc blow.

The AWS and CWB numbering systems, wow, so helpful. Everyone has to master the numbering system, then you know what you can do best with it.

You're the best Sir,You make look so easy and not boring at all.Thanks Sir.

Great video! After seeing you change the frequency when ac welding i was wondering if you could change the ac balance.

@bobmoffatt4133

7 жыл бұрын

Kevin Muehlbach Good thought.

Thank you, Sir, this was very informative and quite helpful. Thanks!

I just got a alpha 200 x, if I didn't know I picked a good one before I do after watching Bob, and that was just the stick welding, what about the Tig and aluminum wow, really cool, and for under 900 bucks, thanks guys really enjoy your videos.

And lastly check the table you're on LOL. Love your videos and content in my first year of welding at 39 years old and you guys are so influential and helpful with your content

"we are going to turn it up, I don't know what yet but we'll find it"-Bob

i would use AC current when i play around magnets.

Thanks Bob. Great video. And arc blow is my answer too. AC reduces arc blow. Also gonna see if my Everlast 250EX has frequency adjust on ac stick.

Great video, Bob, thanks for posting.

Bob can you please do a video of running 11018M with a preheat and bend test

can we see a cut and etch of some 7014? we have a big 500 amp Lincoln ac idelarc and 7014 is our workhorse rod. We do a lot of heavy equipment repair and I've never had a failed repair. Just curious as to how much less penetration I get with 7014 as to 7018 or 6010 or even 6011. Best regards Brett

Love your work Bob!

Iono sir, but you are a great and cool welder and a great teacher. I'm getting into welding for hobby work. Watching all your videos surely helpful! Thanks for your time making these awesome videos! Forgot to say, watching you teaching about welding is very satisfying!

A/C reduces the chance of arc blow and keeps your work piece from magnetizing

Almost thought he was about to test the nice self removing slag on the first run by licking it- lol

You reminded of my father. So thank you.

cool segment, I loved it, Thanks