I have just received an email reply from Agrotk admitting the truth! "Yes, we have had dozens of customers experience the same problem. It's a flaw in our machine design. " It's time for them to become accountable for this design flaw. It has cost most of us thousands of dollars each. Unacceptable!
@joeland3492
Жыл бұрын
In the same boat as you admitted the part is bad and is discontinuing it.they hacked my email and erased all my messages from them if I was you I would copy your correspondence with them.
@travisjames275910 ай бұрын
Thank you for this video, just pulled mine apart and found the damaged coupler.
@RickRossTN Жыл бұрын
I have the exact same problem, and it seems many others do as well. IMO, this should be grounds for a class action complaint against Agrotk and Ritchie Brothers. This product is failing by design, yet they continue to sell it and rip off more unsuspecting buyers!
@joeland3492
Жыл бұрын
I'm thinking the same as you but I went through my emails with them they hacked my email and deleted them all
@jacobarens1459
Жыл бұрын
I'm on board with this guy.
@tonypardini7328 Жыл бұрын
Dealing with same issue. The outside diameter of spline adaptor is too small, it needs to make contact with Love Joy at mounting bolts.
@blakewatson32215 ай бұрын
What is the part number of the lovejoy?
@Cowboy-kitty Жыл бұрын
So you have pt. 2 up yet?
@emmettmeister2351 Жыл бұрын
Do you have any updates? Mine also does the same thing.
@martingutierrez8003 Жыл бұрын
Do you still have the chinese roller? I have bought one and it broke the love joy within couple hours, please let me know if you found a way to make it work. Thanks for your time!
@davidcollins240 Жыл бұрын
Did that fix the roller
@HungNguyen91622 Жыл бұрын
Yo did you ever put this back together?
@jayherron8871 Жыл бұрын
I have the same roller with the same problem. Hoping you guys find a solution. Has anyone looked at the parts from a different Chinese rollers to see if there is a better design that might work on ours?
@benpoguebp
Жыл бұрын
I'm thinking about a belt drive setup
@davidcollins240 Жыл бұрын
Have you tried spinning the shaft by hand mine is very rough sounding and feeling
@RickRossTN
Жыл бұрын
Mine is super-rough sounding, too. I'm starting to think that the failure of this connecting assembly near the motor is actually due to unacceptable resistance somewhere in the counter-weighted axle inside the drum. Maybe the Lovejoy-style connector isn't really the problem, but rather just the observable point of failure after something else causes too much strain and stress? Is anyone else noticing a very rough sound from inside the roller before this connecting assembly smokes and fails?
@BrettsBuilds
Жыл бұрын
@@RickRossTN I have a greatbear vibrator and it lasted 5 minutes working great. Now it spools up, but feels as if its grinding on something and stops. Puts a lot of strain on my hydraulic system when it does this.
@sebastianflores-qy9jd Жыл бұрын
Just got the same roller and it stopped working after 5 min.
@fabricobbler Жыл бұрын
I have the same unit, same problem. do you have the part # of the rubber spider?
@benpoguebp
Жыл бұрын
Yes I do, it did the same exact thing though. Thinking is a bent motor, checking it next
@benpoguebp
Жыл бұрын
Lovejoy 68514438814 it was $147
@Jason-fb5vu Жыл бұрын
Did you ever figure out what was wrong with it? I have one doing the same thing since new.
@benpoguebp
Жыл бұрын
No it's needing to be re-engineered. Working on that now
@TheBattleBranchBoys Жыл бұрын
How does the roller work now?
@benpoguebp
Жыл бұрын
Did the same thing, I need to pull it back in and diagnose more
@TheBattleBranchBoys
Жыл бұрын
@@benpoguebp oh great. I just bought mine two weeks ago. It lasted 10 mins.
@benpoguebp
Жыл бұрын
@@TheBattleBranchBoys I'm wonder if the motor shaft is bent. next chance I get I'll check
@joebono6175
Жыл бұрын
Did you ever get this fixed. And how long did it last
@benpoguebp
Жыл бұрын
@@joebono6175 it lasted about 1 minute until it did the same thing. I bet it's just too much for the lovejoy
@jacobarens1459 Жыл бұрын
Mine didnt last 10 hours. Completely shit out.
@sebastianflores-qy9jd Жыл бұрын
Don't buy this roller still waiting on dealer to send me Parts it's been about 2 weeks.
@KarasCyborg Жыл бұрын
I bought one at a bitchy bro's auction. On my bobcat T650 It vibrated, but compaction wasn't any good. Ended up just overheating my bobcat. Landhonor = Landh Onorment = Land Ornament. Agrotk. Agrovation. Sound it out.
Пікірлер: 55
I have just received an email reply from Agrotk admitting the truth! "Yes, we have had dozens of customers experience the same problem. It's a flaw in our machine design. " It's time for them to become accountable for this design flaw. It has cost most of us thousands of dollars each. Unacceptable!
@joeland3492
Жыл бұрын
In the same boat as you admitted the part is bad and is discontinuing it.they hacked my email and erased all my messages from them if I was you I would copy your correspondence with them.
Thank you for this video, just pulled mine apart and found the damaged coupler.
I have the exact same problem, and it seems many others do as well. IMO, this should be grounds for a class action complaint against Agrotk and Ritchie Brothers. This product is failing by design, yet they continue to sell it and rip off more unsuspecting buyers!
@joeland3492
Жыл бұрын
I'm thinking the same as you but I went through my emails with them they hacked my email and deleted them all
@jacobarens1459
Жыл бұрын
I'm on board with this guy.
Dealing with same issue. The outside diameter of spline adaptor is too small, it needs to make contact with Love Joy at mounting bolts.
What is the part number of the lovejoy?
So you have pt. 2 up yet?
Do you have any updates? Mine also does the same thing.
Do you still have the chinese roller? I have bought one and it broke the love joy within couple hours, please let me know if you found a way to make it work. Thanks for your time!
Did that fix the roller
Yo did you ever put this back together?
I have the same roller with the same problem. Hoping you guys find a solution. Has anyone looked at the parts from a different Chinese rollers to see if there is a better design that might work on ours?
@benpoguebp
Жыл бұрын
I'm thinking about a belt drive setup
Have you tried spinning the shaft by hand mine is very rough sounding and feeling
@RickRossTN
Жыл бұрын
Mine is super-rough sounding, too. I'm starting to think that the failure of this connecting assembly near the motor is actually due to unacceptable resistance somewhere in the counter-weighted axle inside the drum. Maybe the Lovejoy-style connector isn't really the problem, but rather just the observable point of failure after something else causes too much strain and stress? Is anyone else noticing a very rough sound from inside the roller before this connecting assembly smokes and fails?
@BrettsBuilds
Жыл бұрын
@@RickRossTN I have a greatbear vibrator and it lasted 5 minutes working great. Now it spools up, but feels as if its grinding on something and stops. Puts a lot of strain on my hydraulic system when it does this.
Just got the same roller and it stopped working after 5 min.
I have the same unit, same problem. do you have the part # of the rubber spider?
@benpoguebp
Жыл бұрын
Yes I do, it did the same exact thing though. Thinking is a bent motor, checking it next
@benpoguebp
Жыл бұрын
Lovejoy 68514438814 it was $147
Did you ever figure out what was wrong with it? I have one doing the same thing since new.
@benpoguebp
Жыл бұрын
No it's needing to be re-engineered. Working on that now
How does the roller work now?
@benpoguebp
Жыл бұрын
Did the same thing, I need to pull it back in and diagnose more
@TheBattleBranchBoys
Жыл бұрын
@@benpoguebp oh great. I just bought mine two weeks ago. It lasted 10 mins.
@benpoguebp
Жыл бұрын
@@TheBattleBranchBoys I'm wonder if the motor shaft is bent. next chance I get I'll check
@joebono6175
Жыл бұрын
Did you ever get this fixed. And how long did it last
@benpoguebp
Жыл бұрын
@@joebono6175 it lasted about 1 minute until it did the same thing. I bet it's just too much for the lovejoy
Mine didnt last 10 hours. Completely shit out.
Don't buy this roller still waiting on dealer to send me Parts it's been about 2 weeks.
I bought one at a bitchy bro's auction. On my bobcat T650 It vibrated, but compaction wasn't any good. Ended up just overheating my bobcat. Landhonor = Landh Onorment = Land Ornament. Agrotk. Agrovation. Sound it out.