No video
Chinese Mini Excavator: The H12 Hydraulic Oil Cooler and Filter Kit is Complete! Order Now!
centraldiggersupply.myshopify...
The H12 Filter and Cooler Kit has been tested and is ready to go. Don’t let your machine’s hydraulic oil breakdown and burn due to high temps. Don’t let small metal shavings tear your hydraulic system apart from the inside out. Purchase this ready to go kit with all components needed to install and detailed instructional video.
Kits start shipping out Mid-February
Flat Rate Shipping charge of $25.00 in the continental US.
#minidigger #agrotk #agt #h12 #agtindustrial
Interested? Send me an Email: centraldiggersupply@icloud.com
Пікірлер: 85
I looked carefully at this video....very elegant design. Great work
Thanks for putting in the work. When I get my H12 I will get the kit from you.
Seems like a great kit and a good price 👍 pretty awesome. I think these coolers will definitely improve the hydraulic system by keeping the oil from overheating, seals, motors and pump will definitely last a lot longer. 😊👍
Let's go with the h15 kit.
@michigandon
3 ай бұрын
Yes, I want one too! Seems as though this guy is always perpetually "Sold Out". Bummer. :(
@mantooth680
2 ай бұрын
diggit em15 are you gonna do a kit for them
Nice job 🏆🏆👍
I have enjoyed your videos and knowledge on the AGT h12 mini excavator. I have done a test with two fans 50° temperature oil temperature after 3 hours 155°.
your videos are fantastic for these machines. do you have a list of the pump / tank fitting sizes? I got my H12 AGT a month at an auction and have been waiting to use it much until I get the mods done I want.
How about inverting the boom cylinder to reroute the hoses out of direct fire and also fabing a shield / guard for the piston shaft.
Agree with all other comments concerning performance data on this kit. We need some numbers.
I went ahead and purchased the H12 over the QH12 per your last video. Ordered it from Amazon for $5,400. Was looking for a cooler and filter. Delivery says around three weeks, so mid Feb. Was looking into an oil cooler and filter, so this is just in time.
@thegarageconnection
6 ай бұрын
Send me an email I’ll set you up with an invoice. Centraldiggersupply@icloud.com
Looks like this kit will work on my vicsec vc13c 👍
@thegarageconnection
6 ай бұрын
It appears there is a ton of crossover on the kits
Great video I own a H12 debating whether or not it needs a cooler Have you tested your cooler setup to show how much it decreases temp?
Do you offer just the filter option with required hoses? I dont run the machine that long and never had cooling issues
Very impressive, sir. Following for an ff12 hydraulic cooler kit. Or just a part number for the cooler and fittings
@thegarageconnection
6 ай бұрын
Send me an email we can discuss
Thanks for the videos. I've learned a ton from watching them. Do you think this kit could be fitted for the AGT DM12-C?
Great video I own a H12 debating whether or not it needs a cooler Have you tested your cooler setup to show how much it decreases temp? 3:59
Hey my friend. Kit is sold out, any idea how long until more are on the site ? Thank you!
Can someone explain where the filter line goes from the back after entering the filter housing. I can’t tell how it routes after the filter
Would it be possible to put a bigger motor and bigger hydraulic pump on a agt l12?
do you have a filer kit for agt lh12r they already have cooler no filter
Could you do a video of the installation of this kit?
I just bought the h12 kit for my QH12R. Will this kit fit or do I need to wait for the QH12 kit?
When are you getting more in stock?
Very interesting. Would this Fit a QH12R. Slightly different layout.
@thegarageconnection
6 ай бұрын
Still working on that kit
I was going to pick one up but I see it's sold out. You know when it will be back in stock?
When will these be back in stock?
Is the QH12 the same as the H12, or would this not work?
Very impressive Will this fit a kymron rg14g?
Wonder if it’ll fit the H15. Looks like the same hydraulic system, not sure about the size of hose though.
@thegarageconnection
6 ай бұрын
Your return line fittings take a 27mm wrench? Hose size of return is 5/8 100R1?
Two questions: 1- how many amps does the fan draw? 2-Is the fan pulling air in or blowing air outside? I like how you have it arranged, its a very clean set up and looks easy to service and install, better than others I have seen posted on KZread.
@thegarageconnection
5 ай бұрын
Fans draw 3.4amps each while running at speed. I had them blowing into the engine compartment
Please let me know if you plan a kit for the FF12, or similar, with factory installed filter. I would be interested, thanks!
@thegarageconnection
6 ай бұрын
Send me an email we can discuss
I think my AGT QH 12R hydraulic pressure is set too low, do you know what upper pressure limit is safe ?
@thegarageconnection
5 ай бұрын
2500psi is perfect
I have a dk 12.. they look identical.. will this kit work on it?
@thegarageconnection
3 ай бұрын
DK12 is a QH12 so it will not work
I'm going to get a kymron min excavator well that kit work on it?
@thegarageconnection
6 ай бұрын
If it is the H12 style with hydraulic tank in engine compartment it should work
Can you please make an video how to change hydraulic.oils
Do you make a cooler kit for the AGT QH12 that comes with a filter already? And do you have a website to purchase your stuff? Thanks
@thegarageconnection
6 ай бұрын
I’m working on a kit for the units with existing filters, and the website actually goes live tonight!
@ronaldeaganjr9030
6 ай бұрын
Ok sounds good thank you whats the website?
Will you be coming out with any other kits for other Chinese mini excavators? I recently purchased a QH12 and really would like to purchase a kit like this for it
@thegarageconnection
6 ай бұрын
Absolutely it’s currently in the works
@hermelandomendoza9086
6 ай бұрын
Awesome!! I will be checking in often so I can purchase as soon as it becomes available. I’m so glad I came across your channel! Thanks brother
How about a kit for the QH12?
@thegarageconnection
6 ай бұрын
It’s coming I promise
Can I purchase just the hydraulic filter adaptors/fittings from you? I have the filter, housing, and oil cooler. It would make my life easier not having to figure out I need.
@thegarageconnection
6 ай бұрын
Yes you can, email us at centraldiggersupply@icloud.com
Thanks for the channel. I have a Chinese mini skid. And I think it needs a new hydraulic pump. Do you know where you can acquire these? It has 3 hours on the machine. It worked great going off the trailer and then quit. Hydraulic pressure is 700.
@richardfunke8788
3 күн бұрын
Did you check the pressure relief valve. Is it adjustable. I believe he's also got a video on how to adjust them.
I am from Canada. I tried to send an email and it came back as undeliverable. Do you ship to Canada? I know there will be additional shipping charges.
@thegarageconnection
6 ай бұрын
We can absolutely work something out. Feel free to text me 508-717-5676
When will the kits for the H12 and H15 be available again?
@thegarageconnection
3 ай бұрын
I’m working on getting inventory in as we speak
I have a Hightop HT10BZ which looks almost identical to your machine. I bought it with a factory oil cooler. Would you sell me a kit without the cooler - just the filter, fitting, and hose?
@thegarageconnection
6 ай бұрын
Yes we can
@DiggerDaveSea
6 ай бұрын
@@thegarageconnection i would like to go ahead and order that please.
@DiggerDaveSea
2 ай бұрын
Note: When I drained the hydraulic tank to install the filter I fished the bottom with a magnet and came up with some metal debris. Some of it looks like shavings from drilling. Be sure to check and clean your tank.
Le kit pour filtteur a huile hydraulique ff12 je lachete ou .et sa vaut combien stp
Email sent
will this work on H15? I want one, but looks like you are out of stock
@thegarageconnection
5 ай бұрын
I can only offer kits for the h15 without hoses
@timothy9874
5 ай бұрын
@@thegarageconnection Too bad... the hoses are the parts I was trying to avoid making. I ordered a hydraulic radiator on Amazon a month ago that just arrived, so I will just go with what I have. I'll shoot you the information on the hoses I end up buying, in case you will find it useful.
when you say f12 would that be the same as a QH12 ?
@thegarageconnection
5 ай бұрын
They are essentially identical
@darcymarciszyn4627
5 ай бұрын
Thank you sir , will you ship to Canada ?
@thegarageconnection
5 ай бұрын
@@darcymarciszyn4627 I can yes
@darcymarciszyn4627
5 ай бұрын
im not quite ready but lots of these machines here and im sure others in Canada would like to know .Awesome videos and products \solutions. THANK YOU SIR !@@thegarageconnection
Not sure why everyone is going crazy for hydraulic oil coolers, unless your running it 10 hours a day 7 days a week then maybe it’s feasible other that that the oil doesn’t get that hot. The filter is about all you’ll need, add an oil cooler and filter to the engine. It’s oil is well above 220 degrees, yea I know it’s splashed lubricated but you can add a pump, oil cooler and filter and pipe the return back into the valve cover to help cool the head.
@thegarageconnection
6 ай бұрын
The hydraulic oil in this mini excavator easily gets over 185 degrees on a normal spring or fall day, and at oil temp over 185 degrees the fluid life is 12.5% of what it is at 140 degrees.
@Inwetrust-qy2ly
6 ай бұрын
@@thegarageconnection 185 degrees is normal for hydraulic oil, anything over 200 is when to start to worry about.
@thegarageconnection
6 ай бұрын
@@Inwetrust-qy2ly www.aggressivehydraulics.com/controlling-the-temperature-of-your-hydraulic-system/#:~:text=The%20average%20“too%20high”%20point,F%20(82°C).
@Inwetrust-qy2ly
6 ай бұрын
@@thegarageconnection love the generic article, no mention of what iso viscosity to temp. I’ve seen plenty of tractors and excavators with hyd oil temps in the 180 run for years with no problems half with the factory oil.
@chiefkyle1098
6 ай бұрын
@@Inwetrust-qy2ly Viscosity is irrelevant. If you overheat oil it breaks down. If you know "plenty" of machines that run high temps with factory oil you probably work for government, where the machines are beat to sh!t, ran to death, are junk internally, and sold to suckers at auction. You can run a Brigs motor on break-in oil it's whole life if you want. Sure it will still run, but cam bearings, rings, and cylinder walls will be trashed. But hey "iT sTiLl rUnS". smh
Great video I own a H12 debating whether or not it needs a cooler Have you tested your cooler setup to show how much it decreases temp?