Would love a video on what can be done about free wheeling down steep slopes.

Hi Cam, when will you have a new supply of your Complete Plug and Play H12 Cooler and Filter Kits. Love your stuff and thanks for sharing

Cam. Thank you for all the great information and the great products. I've bought from you three times and I am very happy. I am getting my next order ready. If you want measurement or trial fits on the Hightops, I have a Hightop 10 that I am happy to measure up for you.

Hi Cam, your videos are truly wonderful for someone with limited heavy equipment knowledge but who likes to know the why of any subject I’m learning… I’m following and enjoying every one! A question that has popped up for me lately, I have a 2 ton diesel “Typhon” is how difficult it would be to create a float mod for the blade. It’s always been an incredibly useful feature whenever I’ve rented a name brand excavator. Cheers, Jason

awesome!! thank you!

Very cool Cam , keep up the good work.

@thegarageconnection

3 ай бұрын

Thanks 👍

I have been watching your great videos and have subscribed. Question... Have you heard of the Lanty LAT-15's?? I bought one last month and wondering if your kits would work and or what you thought about this mini X?? Thank You for all of your knowledge and effort on your videos too help us mini x guys!!

I need your help BAD !! I bought one of these generic excavators and it has an issue with the hydraulic system , when you move say the boom or arm it labors a lot with out any load the engine sounds like it’s maxed out , so i took the hoses off the boom and i hooked them together in a closed loop with a TEE and a pressure gauge and when i move the lever the pressure goes to 2200 - 2600 lb , being bypassed in a loop like that i don’t think there should be that much pressure built right ??? If that’s correct what do you thing is wrong with it ?

I have a new DM-12C from agrotek, is there a Cooler kit that i could purchase or modify to get this capability in the future? Could I email you some details if possible? I'd love to buy your products when they become available if i can make this work.

the adapters that you have with the couplers what size are they. i have a bs12 mini and i need 2 90 degree pipe to the l20 hose fitting Thank you David

I am about to order the Rippa RIPTX-YCAN (very much like the H-12), which already has an oil filter for the hydraulics but no cooling. Will your set work on this machine? Cool (pun intended :) videos you make 👍🏻

Just bought one. Thanks! Will this act the same as the engine cooling fans (6" units in previous video) or will I still need those?

@thegarageconnection

3 ай бұрын

I’d strongly recommend an additional fan

My 2023 model has a weak power or slow track. I am not sure, would it be a issue with the hydraulic side or gear side? What would be some quick troubleshooting tests i can do to check ?

I'm in northern VA, I'd drop my qh12 off to you so you could figure out the setup, but you said you're moving.

So I bought a AGT L12 that already has a cooler installed but does not seem to have a filter. I tried to order a filter kit but I see you are out of stock? When might you have just the filter kit available and would it be compatible for a L12 machine?

When are you going to have them and the pressure gauge back in stock?

Are you going to be selling the foot pedal kits for the qh12?

Do you have any video or pictures of this installed?

Nice. I love those variable crimpers. Congrats on doing as much as you can on your own. What brand of hose do you use?

@thegarageconnection

3 ай бұрын

For now it’s hydraflux but I’ve got some others coming in from across the pond

Hi Cam, where can i purchase the original ignition switch ? mine filled with water is no longer usable. Great videos !

@thegarageconnection

3 ай бұрын

There’s a guy on FB Rob Degrozier he’s a dealer in NY he has them in stock

I have a MIVA VA 13, wondering if you know if your kit will work on these? Or what I would need to check to ensure it does?

@thegarageconnection

Ай бұрын

I believe it fits those machines also

Hi Cam, I have a Power X PX10L mini excavator... I bought the complete plug and play kit for the h12 and plan on installing it on my machine. I was wondering if you had any experience with power x and if not would I be able to reach out to you for any help if things aren't exactly plug and play and I need to buy fittings etc?

@thegarageconnection

3 ай бұрын

I’ll be available to help, but best thing to do is send me photos of engine compartment and hydraulic lines to centraldiggersupply@icloud.com

@xThExGoDFaTheRx

3 ай бұрын

@@thegarageconnection I'll send these tomorrow. Thank you!!

I have a HT10 by hightop . Im looking to purchase your plug and play mods. Will your current h12 mods work for this model as well ?

@thegarageconnection

28 күн бұрын

It’s about the same, small things are different

Hey man. I ordered the track motor support from you website. Looking to see availability on a few other things. I can’t find you email anywhere. Have a few questions if you don’t mind answering them. Thanks

I just ordered the kit for h12 it says no return line, will be delivered to me tomorrow. Can I order just the return line to complete the kit?

@thegarageconnection

3 ай бұрын

I sent you an email

You sold me the yellow (30L/m) for my ff-12. Does this mean I'm going to have issues?

@thegarageconnection

3 ай бұрын

No sir you won’t have any issues. The 30L/min units actually are required for the QH12 style machine as there isn’t enough room to fit a bigger one

@andrewwilton4595

3 ай бұрын

@@thegarageconnection ok thanks!

Can you make a kit for a JF 12

@thegarageconnection

3 ай бұрын

JF12 is an FF12/DK12/QH12

your site says you are out. Are they in stock?

@thegarageconnection

3 ай бұрын

They’re in stock on the site for the H12 only

@BENZ4315JD

2 ай бұрын

Good deal. I have the hydraulic tank in the floor under my feet. Does the cooler and filter kit fit that? I have Qh13R. Just the QH12 with the cab.

@BENZ4315JD

2 ай бұрын

Listening to your video now. Just heard you call out my QH13. I do R&D engineering for a living. I can give you measurements and pics to help you 100% build out the QH13/QH12.

I have the new H12 and want to add external filter so let me know when they are available and I will buy kit - thanks HOSS

@thegarageconnection

3 ай бұрын

If your machine has the tank in the engine compartment my kits will fit

@meansq

2 ай бұрын

@@thegarageconnection Hi Cam just checked your site and saw you have h12-return-line-filter-only. does this include all required fittings and filter housing + filter element? I have the tank inside engine compartment model.

@thegarageconnection

2 ай бұрын

@@meansq yes it does!

@thegarageconnection

2 ай бұрын

@@meansq yes it does!

How do I order one?

@thegarageconnection

3 ай бұрын

Centraldiggersupply.com

Hey Cam, I sent you an e-mail on your icloud address with pictures of the EM15. I'm currently waiting for the parts to install a 60l/min oil cooler and 10microns filter on it. The weird thing on it is it uses 27mm DIN fittings instead of the more standard 26mm size. If you would like exact measurements of the hoses and list of fittings used for you to produce a kit, just let me know and I'll keep you in the loop as I finalize installation. Thanks again for the great content.

@thegarageconnection

3 ай бұрын

I recall seeing something about that, but to my knowledge and anything I can find in any manual there isn’t a such thing as M27 DIN.

@MichelClavette

3 ай бұрын

@@thegarageconnection Could it be using what is called DKOL fittings? They are 24deg with o-ring and the specs show M27x1.5 for both 16mm and 19mm ID hose.

I have a Lanty mini excavator. LAT-13. I believe it is the same setup as the H12. I would like to order your cooler kit. Have you heard of the LAT-13?

@thegarageconnection

3 ай бұрын

Yes I’m 99% sure it’s a clone of the H12 should work fine

I can't focus with all those drawers open!!

@thegarageconnection

Ай бұрын

Amazingly it’s never tipped over