My Gosh! I was excited to install this unit untill I started scratching my head! The radio worked bit not the stereo. Literally almost 12am and my wife just left me alone to dig for answers on the internet 😂 You are a life saver!! Just on time before our trip

I wasn't even looking for this video but perfect timing! I'm getting this unit in a few days and this would have driven me nuts. Thanks!

I literally pulled some hair out this morning, but your vid helped me A LOT. I have spliced the amp turn-on signal with the acc. Now the amp stays on and KZread/Bluetooth works :D Many thanks 👍🏻

Thank you sir! With your video and a Positap I had this fixed in about 90 seconds! As one other commenter noted, there appears to be an amp wire (blue&white) on most of the RCA plug harnesses. From what I can tell, this is actually switched by the UI, but it’s probably easier/faster for most of us to just tap the ACC line so the amp gets power at the same time as the HU. Thanks again!!!

I just found your video and I haven't tested it but I am sure your solution will the issue I have on my friends car so thank you in advance! Glad you made this video, it looks like it might have helped quite a lot of people based on the views.

Thank you very much I spent a few hours trying to figure it out until I found your video!! Love from the Bahamas!!!!!

I've searched the depth of youtube and Google for a fix for this issue.... thanks so much bro mad respect 🙏.

You've given me a clue how to fix my new installation 🤞

Dude. Thank you so much! Chased that issue for hours.

You just saved me days or aggravation and possibly returning it. First video that popped up and it had the answer!!

Thanks for the tutorial I was losing my mind over this. I moved the headunit from my 94 chevy Silverado to my 2010 chevy traverse and all of a sudden only the radio audio worked.

My Android 10.1 unit uses a harness for JBL amplifier. To solve the no-sound issue, I connected the AMP CTR wire from the main power plug to the AMP CTR from the RCA plug.

I just got this radio in my 03 Avalanche and had the same issue. Thanks You!

Big props to you for the correct pronunciation of Porsche!

Good deal glad you got your problem fixed I just installed the head unit and haven't had any problem until tonight and I can't get the radio app to open the screen goes black and then it goes back to the home screen any one else had that problem

Thanks for the video. I too just had the same problem with my upgrade, except i had an amp wire from the radio and connected to that instead of the power antenna wire. This video only applies to an external amp. My other truck is basic and works fine. Thanks again for the video

I was going crazy, I'm glad you were able to help, bout to open the dash up correct the problem and see what happens!!

Fantastic video! Thanks for saving my sanity. How did you mount yours to the dash? Other videos I've seen use velcro 😮

Thanks bro this video really helped me solve my issue. I was getting ready to install a switch in between my blue amp wire coming from my android radio My issue was I would only get power from my blue amp wire from the unit only when disconnecting and reconnecting it.

My god!! Thank you!! Thats the only issue i been having with mine. Lol

Hey, thanks for your video. I bought a head unit for my e90 off of Amazon and didn’t return it because I knew it had to be an easy fix. After buying a cheap $5 multimeter from harbor freight, I had it fixed in a few minutes… Just like you said, I found the amp wire that was turning off when opening apps, yet it was on when using FM/AM radio and simply spliced ACC power to it. Now I can use my CarPlay. 😂

@MegamanEXEv2

Жыл бұрын

Right on man, enjoy

@VictorHernandez-ss6lz

Жыл бұрын

Did your stereo came with a harness ?

@harroins

6 ай бұрын

Hey! I have an e90 328i 2007 with a headunit from amazon as well lol. I was just setting it up today and I am at the same situation these ppl are at. Can you explain which wire is the amp on the e90 or make a video? Thank you so much! And merry christmas

@p.g1409

6 ай бұрын

@@harroinsI have the same problem…

@stephenalexander6413

Ай бұрын

So splice amp wire and run it to which wire

How do you fix a volume lowering on its own problem with these?

I have the same problem so I need to run the acc wire directly to the ant wire or amp wire or both?

Thank you so very much!!! Really helpful!!

Hello, so basically I have to connect the blue ant wire straight to the pink acc wire??

What brackets did you use for this install? I’m putting this same radio in my 2001 Tahoe and I can’t figure out a good way to mount it. It doesn’t come with a radio sleeve like other radios.

@MegamanEXEv2

2 жыл бұрын

Actually haven't sorted that out yet, its not hard mounted. For a while, I used pieces of Harbor Freight Anti-fatigue floor mat cut up to brace it, but right now its just sitting in the hole. I will come up with something at some point to mount it.

Would love to see a before and after of your wiring

Buddy, you just saved me from throwing out one of these units for my Jeep 😅

Thanks this helped a lot... also do you know how to do the video in motion hack ?

what about if u dont have amp and it cuts sounds completly intermitent?

Thank YOU! FUCK! They need to make more HOW TO videos on this dang thing. I've been looking for days.

I have a android Radio API 29 , issue is volume stays the same…. When adjusting Volume Level will Not change? Your thoughts please?

Dude.... thank you thank you thank you. I bought this unit from an amazon return auction for $25.00 and couldnèt get it to work properly. That is until I watched this and BOOM.... itès fixed.

@MegamanEXEv2

Ай бұрын

I gotchu

Thanks for the help! It works!

Well on my car I did hook it into ACC and it drained my battery dead overnight....each car is totally different configuration. If when you take out the key and open your door the unit is still on...then you can't use ACC even if you power off the unit from the front it doesn't matter. The yellow wire is for contant 12V basically to retain time and preset stations....it will not draw anything like if it was hooked up to ACC

I am having the same problem and I’m a total noob to wiring things up but I had the blue wire from the amp tapped into the blue antenna and only radio worked like you said. Then I tapped into a red wire in the harness (the only red wire, I don’t have a meter, so I just guessed) but now there is no sound at all. Any further suggestions?

I just installed the awesafe unit and it works great except for the rear speakers in my 2008 enclave without premium sound. I fade fully rear with volume all of the way up and still nothing. Stock head unit worked flawlessly. I don’t have rear amps as far as I know. Wiring diagrams don’t claim there is anything in between the head unit and speakers.

Do you know if this unit (double din) has a fade balance control?

Question, it seems i don't have that cables or maybe they are not labeled, the ones that are labeled are KEY1, KEY2, AMP CTRL, PARKING, CAM DET.. Any ideas?

@theblackhand6998

3 жыл бұрын

Having the same problem, dont wrry bro u not the only one

What wires did u change ckuz mine dont make no noise at all

Thanks a lot bro your video really helps

Did u hook up the power antenna wire from the unit?

I have the same problem, but mine, only wont play youtube when mirror linked with my android... could it be the same fix? Any advice would be appreciated.

How can you adjust the volume I turn it all the way up and it’s not loud to max

Hi I spliced my radio antenna wire into the acc wire for power and to get the Bluetooth sound to work and it worked fine for a day. Everything functioned as normal. For some reason today now when I turn off the car my radio stays on. Not sure why as I checked the power with key off and was no power to either of these wires only with key on. Now for some reason with key off the head unit is keeping constant power and won’t shut off. Please anyone with a solution would be greatly appreciated!!

If anyone is having this issue with the Chinese android for the Chevy Cruze LTZ, simply unplug the plug with the RED ACCESSORY WIRE. It's a plug with 4 wires on it. Do not use this plug on your new android radio. It shuts off the amplifier and all volume. Took me forever to figure it out and it was honestly by accident.

@upyours616

2 жыл бұрын

Pls make a video on this bro

@Jake-im8eq

Жыл бұрын

Do you have a video on this? I bought a Chinese android screen for my Chevy Malibu but have no sound

@robertholsopple9451

Жыл бұрын

@@Jake-im8eq if your android radio is the same as mine it will be the plug that has 2 black 1 purple and 1 red wire on the harness. Unplug that and just don't use it. I have the premium radio package in my ltz rs cobalt so mabe it's different.

@robertholsopple9451

Жыл бұрын

@@Jake-im8eq do you have that plug on your aftermarket android?

@1kbryy

7 ай бұрын

Cannot find what you're talking about

What dash mount are you using?

so... does this mean the blue wire must be connected to yellow?

Thank you so much for your video. you are god sent

I'm having no sound issues on 10.1 model 9216b got it off ebay even installed old radio speakers work but when I install new unit it powers up but no sound. It's a 2000 jeep wrangler . Please help thx.

Doesn't it have a remote wire to power on the amp? Mine goes to the remote wire then I can manually switch on and off the external amp thru the screen

Idon't get any Audio from any source , i could not find any amp switch or amp remote wire for my fiat 500 on the wire diagram , I did find wires for "amplified" rear and front , left and right speakers and also for amplified subwoofers 1 and 2 (+) and (-) so i have no idea witch cable to split to connect the acc. Thanks for your help.

Very helpful thank you

Thank u vary much did this today why I was waiting on oil change woooo I'm fuckin hyped thanks again so much

good evening if you can help me when i put the tv to play has picture but no sound. this only happens on TV radio plays normal DVD plays normal sound.

Okay so running the blue to my ACC gave me no audio at all. However, for some reason the harness I got had no pin for the output signal for stereo amplifier on/off (had to make a pin) once i connected the blue to there i had radio audio. And my phone will connect to Bluetooth but shows in red letters and has no Bluetooth audio.

I need to know I have one of those in a Nissan Ultima SL and my sound does not work for the USB and other stuff but it works for the radio it the way it all comes on so the question is do it it works for my Nissan Ultima 2018

Same problem .thank you .save my day ..

Do you know which cables am not connecting, the ride side speakers aren’t working

On mine I have audio but the sound is very low and the quality bad compared to the car factory navi, you know anything? I think it might be related to the car amplifier that's not running on it but idk how to activate it

Ant wire is for a power ant, you gotta use the blue with a white stripe for remote amp

@lastof4brothers

7 ай бұрын

I was just wondering. If I don't have an external amp, will I still have this problem? Or is it just for external amps? Also, how does it sound without an external amp?

Nice. My problem is today smoke came out the back of the unit, no more sound. Ontop of that, the sound settings is gone from the menu. Its blank screen. I did factory reset didn't fix it.

Thank you!! I had this exact problem!! Been going through all the settings on my phone and the head unit scratching my head.

Thank you so much! Just bought this and like you about pulled my hair out trying to figure this out. Did what you showed and it worked

@MegamanEXEv2

6 ай бұрын

Glad it helped!

Do you know how to connect a SHA16/23? I can't get mines to work. I have a 2008 Cadillac STS. Please help. 🙏🏽🙏🏽🙏🏽🙏🏽

The steering button works and all but no sound. I got the 13inch one I set the CAN box type but still no sound

thanks and just wondering if you have any ideas my am quit working in my android unit but fm and spotify work fine. Any ideas to get am working again.

I have a android Radio API 29 model , issue is Volume will Not Change , it stays on the same Level, volume will not go Louder, can someone help?

I just have this issue , just got my airco fixed it worked while driving with airco , but few hours later it just stopped if i put the sound to the max then i hear sound but really low

I have a 2008 Mitsubishi lancer I bought this head unit, still no luck I have hooked the amp wire (blue) to the amp wire running to my after market amp. I believe all the harnesses are in properly. Im boyond confused with what to do, can anyone help?

What if it has been working fine for over a year, and the problem just came now? And sometimes randomly, I will just work again. Do you have any idea what that might be? I’ve searched the whole internet

I have a question I hope someone can help . I’m loosing my mind . I have a dodge Journey 2018 just installed a android big screen radio . Got everything connected everything works but the valine knob or the volume button on the steering wheel . Do you have any clue what might be wrong ???? Anyone please ???

Have you had any issues with the usb connections? Same unit here. I have zero connection coming from the USB ports. Changed usb settings around from device to host and 2.0->1 and back again. Trying anything and I get nothing. No charge, no read from a thumb drive. Haven’t gone as far to test the port with a probe yet.

@39Shirt

Жыл бұрын

I had this issue, I hooked up the usb wires upside down. Flipped them and all is goid with it now.

Antenna wire is blue (ANT) and is only powered when terrestrial radio is on. Amp turn on wire is BLUE-WHITE.

thanks for info Although I have an antenna voltage connection to a suitable connector I still have the same problem as yours I did not understand where you connected the blue wire - is to the ACC?

@Brunsen-0

3 жыл бұрын

Same here did you connect the acc to amp?

@MegamanEXEv2

3 жыл бұрын

@@Brunsen-0 Blue is no longer connected, its cut. I have ACC switching on my amp now.

@MegamanEXEv2

3 жыл бұрын

@@ecec5297 yes

@johannebuspronov1813

3 жыл бұрын

@@MegamanEXEv2 did you mean that you connected ACC into the ANT wire? i still dont get it.

@atmosphair1

10 ай бұрын

I dont understand, i have the same problem, but i have already power on the blue wire🤔

Thanks Pat.

Mine was working fine for over a year. Then last night it stopped. No sound, except for the radio. It was just updated to the most recent version yesterday so it’s definitely a software issue.

What happens if there’s no audio with both radio and all media ? Including cd?

@asfsfsadasdasdad

3 ай бұрын

Ever fix this?

@drgstrife

3 ай бұрын

I did I had to get a new amp

@asfsfsadasdasdad

3 ай бұрын

@@drgstrife what kinda car do you have

Life saver!! I was ready to ship it all back! This was my exact issue. I used the ANT wire instead of the ANT/AMP wire on my Eonon Q80Pro. These are seriously worth it for the money if not for these small quality fixes.

You use the (amp turn on or remote ) .. the antenna wire is to put up an power antenna . So when u switch to everything but the radio that ant wire will not work .

@39Shirt

Жыл бұрын

In the settings you can set antenna always on. That would keep power to it.

MAN this drives me crazy also! So you just cut the ANT wire from the amplificator and wire it to the accessory and that's all? I will try this fix and come back! Thank you very much for your video!

@ianpaulpaul6815

2 жыл бұрын

did it work?

@OxxGabyxxO

2 жыл бұрын

@@ianpaulpaul6815 i didn't try it, i replaced the motherboard of the nav.

@OxxGabyxxO

2 жыл бұрын

@Ultimate Sayian i didn't try it, i replaced the motherboard of the nav.

HI I bought android media for Ford Fiesta and it came with proper wiring, I checked if my acc I connected to amp wire and it is, but still a have no sound from bluetooth, although I have sound from radio and from cd, does anyone knows what else I can try to fix this problem

myne does not start anymore it gets stuck at the white android writing... any ideas ? :(( thank you- quad core one

So i run the ANT wire to the ACC wire and that's it? What color is the ACC wire btw on the harnest to back of radio?

@MegamanEXEv2

2 жыл бұрын

No, ANT shouldn't be hooked to anything unless you have a powered antenna which most cars now dont. You hook the remote wire for your AMP up to the ACC/switched 12v wire which should be red on your harness.

@lordsavior7889

2 жыл бұрын

Will the remote wire be on my factory harnest or the Chinese android head unit?

@MegamanEXEv2

2 жыл бұрын

@@lordsavior7889 Should be on your factory harness, might be on a different plug from the main radio harness. My truck is a GM vehicle for example, and the pink remote wire was on a different plug.

@lordsavior7889

2 жыл бұрын

@@MegamanEXEv2 i have a 2012 Nissan Maxima and online it says the amp remote is a blue wire with white stripe ,im going to use a wire tester to see which one has power with the key on to find it.it really sucks without sound but thanks to you i have hope on solving the issue.

man thanks cause I was about to take mine out back and burn it

So ive got no aux so how do i sort it?

where does your pink wire coming from? direct remote amp wire ? is it from the harness adapter or the vehicle side?

@MegamanEXEv2

Жыл бұрын

Vehicle side

@francischan8263

Жыл бұрын

​@@MegamanEXEv2 thank you! I'll tap the ACC red wire and feed it to my amp remote wire tonight. I just don't understand why they can't have the ant control output stays on with the headunit. It can be a very simple fix on the firmware side.

I have one and have it for about a year now still trying to get it to work. These things are complicated as hell. Can someone direct me to the Cadillac CTS install pls. This car has no direction as to what wire is which😩

What head unit is that? Does it support CarPlay?

Actually, I spoke with one of the manufacturers about this. The second pack of stereo cables that have RCA jacks have the blue AMP CONT wire that you need to connect to the factory amp cable. The cable you were using is for a powered antenna. Which is why the radio turns on and gives power to turn the amp on. It’s confusing because the antenna power wire is blue just like the amp wire. Most people with factory amp might never plug in the rca cables since they aren’t using them with a factory amp, hence never locating the real amp wire.

@giovanniv.7664

Жыл бұрын

Grazie grazie

@giovanniv.7664

Жыл бұрын

Scusami il secondo pacchetto di cavi con rca va inserito nellautoradio e di esso va attaccato solo il filo blu ampl. Al cavo rosso acc. Giusto?

@Jake-im8eq

Жыл бұрын

How do i connect the AMP CONT cable to the factory amp? 😅😅 I am having this same problem but dont even know where the factory amp is

@LGfosheezy

9 ай бұрын

Awesome thank you for this! I was wondering why there was a blue wire on the RCA pack. Do you know where to find or what color the factor AMP wire is for me to connect to the blue RCA wire for power? That’s where I am stuck.

@evlsc400

8 ай бұрын

Like someone mentioned earlier they spliced the ACC constant power to the AMP CONT wire so the head unit triggers the amplifier at start up versus only when the radio app is in the background.

Please help... My unit was working for months now all of a sudden the sound keeps switching on and off every 3 seconds, streaming from the phone or playing direct from unit its the same fault. Its gotta be something simple but I can find what it is 🙈🙈🙈🙏🙏

I got the atoto a6 performance (pf) version Android in-car entertainment installed and got no sound turn volume all the way up and can verily hear the soun

I just bought the 9.7 inch and everything is perfect. But when I shut the car off the radio stays on but the sound goes away. When I turn the key to acc the sound come back. I want the sound to stay on with the radio without having to go to acc

Just had a really good look at all my cables. Tried everything. My problem is exactly the same but my sound does actually work for a split second then it shuts off. That's you tube on the actual unit and music playing via Bluetooth. A split second, so frustrating

@gilfreitas8

Жыл бұрын

Same but after a few days with that problem now its completely mute. U find any resolution?

Hey so i can’t even get the radio app to work as it says my unit isn’t connected to the internet, even though it is connected to my Wi-Fi! When I checked software updates it says it was all up to date. Before u start ripping out wires to try this fix can anyone help?

What if I have a sub and an Amp hooked up? I get no sound from anything not even the radio

@logan_d7074

Жыл бұрын

You ever figure this out? Going through this rn😅

@jcorpus209

Жыл бұрын

Me too

@bigjwitacamera4365

Жыл бұрын

@@jcorpus209 any luck?

@jcorpus209

Жыл бұрын

@@bigjwitacamera4365 no luck. I’m about to count my losses.

@jcorpus209

Жыл бұрын

@@bigjwitacamera4365 no luck

Ant connected to what wire

If the player supports audio output opensl es then it also works

I have the same problem but I have no sound at all I don’t hear the radio but I think that’s because the radio isn’t on USA stations but did you connect the ACC wire to the ATT wire?

@MegamanEXEv2

3 жыл бұрын

I connected the acc wire to the amp switch wire, the ANT wire isn’t connected to anything now.

@theblackhand6998

3 жыл бұрын

Yo lmk if u were able to fix yo problem, ig:0hWellJoel 0is a zero

Thank you bro I had the same problem😂👍🏻👍🏻👍🏻👍🏻