you sir are a life saver. Got it back to working so I can use it once every ten years !

Your a saint bud. Love the tutorial!

Thanks for the video!!! Solved my problem on my 01 Silverado.

Thanks for the video, I was able get my door back on line. Although I bought an assortment of plastic clips instead of bending the rod,still very helpful 👍👍👍.

@ebkbode

2 жыл бұрын

You’re welcome! Who knew this was such a common issue…

@ellispn9377

Жыл бұрын

Where did you buy the clips from, could you please send me a link?

You're a gentleman and a scholar, Your kindness is only exceeded by your appreciation for mankind!

@mikeb.6502

2 жыл бұрын

Damn. The information & video was extremely helpful, but you act as though you want to marry the guy. Geez. 😕

Awesome, thank you. Now I can use my door again! Ps. I also have melted crayons in my cup holders 😅

@ebkbode

2 жыл бұрын

Haha, melted crayons gives the door character. I’m glad the vid helped. 🤙🏻

Thanks man, i did it your way in the end. I bought the plastic pieces in Autozone for like 4 dollars, put in on the locking rod, but for the love of god i could not force it in the whole, and i was trying for like 30 minutes lol. So i just took it off, bent the tip a little like you did, and noe it works like a charm

Thank you! I got it fixed in under 10 minutes after watching your video.

JACKPOT!! Exactly the video I needed, thanks for posting it!

@ebkbode

2 жыл бұрын

You’re welcome!

Thank you. I believe you saved me about $150 or more. Did it myself. 😄🙂

Great video. Thanks for taking the time to make it. Mine just stopped opening today. Thanks again

Thank you so much man

Thanks for the video, explained my issue perfectly.

Thanks sharing your experience. made the job so much easier knowing what to do.

4 vids on youtube about fixing stuck rear Silverado ext cab doors and all 4 of them are stuck on the bottom.... Of course. Mine is stuck on the top part... Here I go reinventing the wheel again!

@ebkbode

3 жыл бұрын

Make a video lol

@daz4312

3 жыл бұрын

@@ebkbode no camera... my phone doesn't do that stuff.

Thank you for this video much appreciated!!

A little all over with the camera, but I sure appreciate the video! Great job!

Thank you for the video!! 👍🏽

One handed even. Awesome! Thanks for this.

Thanks alot. you saved the day.

Thanks I used a hallow wall fastener and put it in that hold and the lower rod

Wow, Great video. Also, thank you for not telling us about your life's story. Anyway, Thank you.......

Great video!!!!! Thank u sir for your help

@ebkbode

5 жыл бұрын

Jimmy Inglish Absolutely! 👍🏻

Thank you for making this video I just fix my truck 😁

@ebkbode

5 жыл бұрын

Elphoenix1 No prob!

Awesome video, 👌 thank you very much!

Thank you

Thank u sir.

It wrkd. thanks big!

Let’s hope it’s this easy to fix mine

Exactly what I needed, thank you!

What happen both rods are hooked up and bottom latch won't unlock ..wd 40 over and over any help

Parts are discontinued could not replace the clip so I had to improvise

My actual latch at the bottom won’t open. All rods attached I think what ever is on the latch broke

Thanks great explanation

Was the door panel difficult to get off with the door shut & rear seat folded down?

@ebkbode

5 жыл бұрын

Eric Jansen I just popped out the forward side and reached in to pull up on the rod. After I opened the door, I took it off...

@codywhoever1091

5 жыл бұрын

It’s a bitch to get off, just be careful and slow and you shouldn’t brake anything. When the door won’t open there isn’t a lot of space to work with

My latches won't open even when I pulled manually right on the latch.

My rod is working but the bottom latch will still not release for the door to open. Suggestions?

@ebkbode

4 жыл бұрын

Grateful Nomad Will the bottom latch operate if you pull the rod up using your hand? I’m just wondering if there’s not enough tension from pulling the handle to release the bottom latch. If that is the case then you might need to replace the handle. They’re cheap and also cheaply made.

@SteveHencye

4 жыл бұрын

@@ebkbode The handle actually broke off a while back when it got real cold so I have been manually pushing the lever. When I reach down and pull the rod it is being fully extended and I can hear the latch release but the door will not open. It will open at the top but not the bottom. I sprayed it down with WD40 and put a screw driver in there and tapped it with a hammer to tet and break the rust free but it did not help.

@ebkbode

4 жыл бұрын

Grateful Nomad Damn that sucks. You may need to jimmy the latch with whatever you can find? It’s hard to say without seeing it myself. If you are able to jimmy the latch open, then obviously don’t close it again without repairing or replacing the worn component. Good luck man.

@89giantfan

3 жыл бұрын

did you ever get rear door lower latch to work ??? I have same problem.

@BradySzabo

3 жыл бұрын

I saw another guy, same problem, he used a crowbar under the door because over time they can sag. This took pressure off and he wiggled back and forth, pulled lever and it release. Maybe use some penetrating oil first.

Bottom latches froze locked How can I remove it

@89giantfan

3 жыл бұрын

did you ever get rear door lower latch to work ??? I have same problem.

@williamcollins6276

3 жыл бұрын

Same problem here

@griffinvanvuuren811

3 жыл бұрын

Anyone figure this out? I think I have the same issue

@tomtom7955

5 ай бұрын

I had the same issue, after lubing and beating for hours with no luck i got a working door from the junk yard and swapped the door.

AWESOME DUDE THANK YOU