2005 GMC Sierra 2500HD - Fixing Stuck Extended Cab Door
In this video - we fix the stuck extended cab door on the 2005 GMC Sierra 2500HD.
This video will show you how to get the door open - and how to fix the door latch mechanism that is broken.
Tools Used:
Milwaukee Battery/Charger - amzn.to/2GEcS8d
Milwaukee Fuel Ratchet - amzn.to/2IGdMab
Thanks everyone for all of your support!
Help support the channel by checking out the store:
www.bonecrrusherss.com
Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037
The Tools I Use: www.amazon.com/shop/bonecrrus...
Follow me on Instagram: / bonecrrusherss
Follow me on Twitter: / bonecrrusherss
Like me on Facebook: / bonecrrusherss
This post/video contains affiliate links. As an Amazon Associate, I may receive commission from qualifying purchases made through my links.
Пікірлер: 76
Thanks you sir for your excellent video! I had the exact same problem, and by watching you step-by-step, I was able to get my door back opened after being stuck shut for over five years. It’s people like you that make these videos that have saved me literally thousands of dollars in repairs and have taught me how to work on my own vehicle. Thank you from Oklahoma!
@bonecrrusherSS
3 жыл бұрын
Glad it helped! Mine was stuck for 6 months - and I finally got sick of it and tore it apart to get it fixed.
I watched like 5 other videos and none were as clear and concise as this one, thanks so much for your help!
@bonecrrusherSS
3 жыл бұрын
Glad it helped! There is another video out there - but the guy had a stereo cut out and made his fix a lot easier then those of us with normal door setups.
Awesome video! I really liked how you showed how to get the door open and the things you learned along the way. And bending the rod trick....was awesome! Thanks for helping me out!
@bonecrrusherSS
2 жыл бұрын
Glad to help!
@ariusdenunno534
Жыл бұрын
I’m still
Thank you for making this video. Getting the rod hooked into place is a little tricky. I used the bailing wire/zip tie to secure it as I could not get the plastic replacement around the rod completely. Used some needle nose pliers to lift the rod from the side latch to release the door.
@bonecrrusherSS
Жыл бұрын
Glad to see it helped. Once I fixed it - I never had to touch it again.
Fixed my door with the help of your video. Thanks for the video.
@bonecrrusherSS
2 жыл бұрын
Glad it helped out!
Thank you, this was very helpful! I was able to repair my door thanks to your video!
@bonecrrusherSS
Жыл бұрын
Glad to help out!
Thanks for the fix. I couldn't figure out how to get to my bottom latch. I saw the video where the guy had the speaker there too but I don't have one. Once I saw how you did it, I was able to fix mine in less than 30 minutes.
@bonecrrusherSS
Жыл бұрын
Glad I could help!
10/01/2022: Thank you for the video. I just bought a 2002 Silverado and I too can't open the driver's side extended door. It looks like I won't need to buy any parts for this repair. Yayyy.
@bonecrrusherSS
Жыл бұрын
Glad to help!
Hey thanks for the video. Never would have found that damn little hole for bottom rod without it!
@bonecrrusherSS
4 жыл бұрын
That bottom rod sucks something aweful!
Had the exact same problem on my 06 ext cab Sierra. Thanks for the video
@Tired2valve
4 ай бұрын
Use Dorman 75455 clip from autozone. Was $7buck. They have another one that’s an assortment. But this one’s a single one and fit great
@bonecrrusherSS
4 ай бұрын
Glad it helped!
great video exactly what I was looking for
@bonecrrusherSS
2 жыл бұрын
Glad to help!
Thank you so much , your video was so helpful. I was looking for the same thing. Great job!! Cheers 🍺
@bonecrrusherSS
2 жыл бұрын
Glad the video was helpful!
Brilliant! Appreciate the assist!
@bonecrrusherSS
Жыл бұрын
Glad to help!
Very Helpful Thank you
@bonecrrusherSS
2 жыл бұрын
Glad to help!
Nice vid. Way better than the others.
@bonecrrusherSS
3 жыл бұрын
Glad I was able to help.
Good job and great tutorial bud!!
@bonecrrusherSS
3 жыл бұрын
Glad it was helpful!
This is the exact prob I have. Thanks!
@bonecrrusherSS
4 жыл бұрын
Hope it helps!
Thanks. I have the same problem on mine. This will help a great deal. Cheers.
@bonecrrusherSS
2 жыл бұрын
Such a pain to deal with - but pretty easy to fix.
Best video. thanks
@bonecrrusherSS
2 жыл бұрын
Glad it helped!
Time to do this with the ZF6 BBC HOSS
helped a lot thanks!
@bonecrrusherSS
2 жыл бұрын
Glad it helped!
Thanks for the little tutorial for a simple fixed that helped me with the same issue. That green plastic broke off probably due to over time shutting door. Were you able to find that green piece that connected the rod to the frame?
@bonecrrusherSS
4 жыл бұрын
No - I'm not sure they sell that clip separately. I just put the rod back in the hole, and bent it slightly.
Thank you going to do this this afternoon
@bonecrrusherSS
2 жыл бұрын
Have fun!
@Junior-fd8ux
2 жыл бұрын
@@bonecrrusherSS already done brother. Thank you. Just got the truck and it was driven me nuts
Awesome thanks
@bonecrrusherSS
3 жыл бұрын
No problem - glad the video was helpful.
Did same job but used screwdriver and needle nose pliers thru the removed edge handle cavity to open the door and once latch assembely nuts are removed I bent the top of the lower rod into a hook and reinstalled with no clip. Start to finish 15 minutes.
@bonecrrusherSS
2 жыл бұрын
Has the fix held up?
thank you
@bonecrrusherSS
Ай бұрын
Glad to help!
You can reach the bar through the side handle that has the t30 torx
@bonecrrusherSS
Жыл бұрын
Thanks for the suggestion.
Fixed without a trip to the auto parts store thank you also the two clips on top 90 % of those truck have them broke the sun will just cooked those overtime
@bonecrrusherSS
2 жыл бұрын
Glad to help out.
Homer be like "damn anemic rod"
Mine is all connected but won't open the top of the door moves when move handle and bottom catch is moving but won't release. I took the 4 nuts off of bottom catch. Any other ideas people
@bonecrrusherSS
4 жыл бұрын
Unfortunately - I only disassembled the middle and lower rods. I didn't even look at the upper assembly.
What’s the green plastic part called and where can I find it
@bonecrrusherSS
2 жыл бұрын
Might be on Google?
Fucking guy I was trying to see how you opened the damn door and you went straight to you did it by accident 😂
@bonecrrusherSS
Жыл бұрын
Wut?
Cool but you didn't comment on the issue of the bottom where you hook the rod into that's the problem I'm having
@bonecrrusherSS
Жыл бұрын
I had to bend the rod end point that kept popping loose.
@deancampfield4703
Жыл бұрын
@@bonecrrusherSS ya bud but it's a 2005 WI vehicle so the bottom latch is still hooked up to the rod just fine. What I mean is. Second door d side haven't been opened in like 12 years I don't want to tear it apart now I'm in the upper peninsula so mess with it when I get back. Aneu ideas send them my way ok thanks
I cant get the bottomed to let go still... like it will not budge
@bonecrrusherSS
9 ай бұрын
The door panel? Make sure all the screws are out - and give it a pull.
@MayanDreams
9 ай бұрын
@@bonecrrusherSS No like the door itself I took the panel off the door itself will not let go of the bottom
Mine has been stuck for a few years now
@bonecrrusherSS
3 жыл бұрын
Then get it fixed!
@teresapeabody2746
3 жыл бұрын
@@bonecrrusherSS I have the door all apart, but it is still locked closed. I am planning to cut the lower lock out with a die grinder and wiz wheel today. I can not get it to release. I ordered the replacement parts yesterday. A liberal coat of wd-40 last evening may save me today, but I am doubtful.