I'm replacing both upper control arms, both lateral link ends along with both motor mounts and trans mount on a 2010 Silverado lt with 330K miles on it for my Uncle. Your video saved me from figuring it out, Very educational on ways of doing it and I appreciate you showing how it's done. Thank you again!

Do glad you showed what this sounded like in the beginning of the video. That's what mine is sounding like now.

I like how you talk the whole time! 😊 I felt like I was really there with you! Great teaching method! Thank you for your video. I'm switching out my mounts later on today and your video was the most helpful. I appreciate it! ❤

@fixersautomotive4514

Жыл бұрын

Thank you for the kind comment.

Nice job on the mount replacement. Getting ready to do this on my 2011 half ton 2wd. The chickens are pretty cool man👍👍

Thank you I did exactly what you did but....I disassemble the mount into two pieces; separating the plate and the rubber mount on the passenger side to easily remove the passenger motor mount.... Make sure the shield match OEM!

@fixersautomotive4514

3 жыл бұрын

Yes thank you for the great tip on the passenger side mount.

Thanks for the vedio I found it easier to to this o my 04 5.3 suburban and i have to do the front main seal also lol

Thanks this video was very helpful. I also have a question, so you think it is possible to do this job without the lift? Like with just a jack?

@fixersautomotive4514

2 жыл бұрын

Yes. You can replace the motor mounts on the floor w/ a floor jack. Just make sure you lift up the motor w/ a block of wood on the oil pan.

Just did the driver side motor mount and the transmission mount on mine 2011, I was looking for an easier way to do the passenger side with out disconnecting the exhaust manifold, looks like you found a way. Thanks for the help.

@fixersautomotive4514

3 жыл бұрын

Good luck w/ the fix. It’s not easy to replace the passenger side motor mount. It might be easier to remove the exhaust manifold but it can be done the way I did it but you will have to jack up the motor like the video. Thank you for your comment, please share and subscribe.

If you remove the starter and jack up the motor its easier to replace the mount since removing the manifold could result on broken bolt. Like your videos really informative keep it up!!!

@fixersautomotive4514

2 жыл бұрын

Thank you for comment, hope it helps people out.

Good GAWD! I thought that motor was gonna jump OUT of the engine bay!!!!!!

@fixersautomotive4514

4 жыл бұрын

I know, the worse broken motor mounts I’ve ever seen.

Excellent video, thank you.

Good job dude

Feed ur chickens, Art.... Gr8 video!!

Great attitude I know it's a pain in the ass but it's giving me some tips on doing mine thanks U.S. MARINE VET

I just did the driver side it wasn't easy I'm dreading the passenger side less room u didn't take the manifold off on passenger side so it can be done?

thank you! :)

isn't it bad to lift from the harmonic balancer?

@stephendee7839

3 жыл бұрын

I wouldn't have done that. The oil pans on these engines are structural, so lifting on them is fine.

@Dubsspeed

3 жыл бұрын

Very! Good way to make sure the vehicle has a vibration after the other work is completed

Upgrade to GM Genuine Parts 25847739, solid rubber mounts off a H3.

@fixersautomotive4514

2 жыл бұрын

Thank you for sharing that info. That’s a great upgrade for the trucks.

Dear Arturo how can get in contact with you for fixing a Dodge Viper?

How many hr of labor they normally charge for those mounts

@fixersautomotive4514

3 жыл бұрын

Book time is 4.5 hrs.

are these mounts the same for both sides o passenger and driver have different number part??i mean if i want to replace boths sides i just buy parts number aCDelco 15854941 double right ??

@fixersautomotive4514

2 жыл бұрын

Yes on the Chevy trucks there the same part for left and right side motor mounts.

@elrojas9352

2 жыл бұрын

@@fixersautomotive4514 thanks for the fast response what you location if it is in florida lmk and i will take my truck too you since u have the experencie what the labor cost for this??

@fixersautomotive4514

2 жыл бұрын

I’m in Tucson, AZ. Labor cost is around 4hrs at $85.00 per hour.

does this truck only have 2 mounts?

@fixersautomotive4514

3 жыл бұрын

Yes, 2 engine mounts as you see in the video and 1 transmission mount.

Great video Brother. I wish you would show the trick to unplugging the oil sensor plug from your other video. I could not figure out how to get mine off. Thank for the great vids.

What’s the alternative without removing the starter?

@fixersautomotive4514

3 жыл бұрын

You would have to remove the passenger side exhaust manifold in order to get the mount out from the top side. I’ve done it both ways. There just about the same but you probably will have to replace the exhaust gaskets, they might not seal back up. Hope this helps.

Is it possible to do without a hydraulic lift tho ?🤔

@fixersautomotive4514

2 жыл бұрын

You sure can, you can use a floor jack and a block of wood under the engine oil pan and carefully lift the engine. Of course it’s harder and you can still get it done.

@orvillef19

2 жыл бұрын

You are the best!

Wow. Those were impressively bad!

@fixersautomotive4514

3 жыл бұрын

Thank you for watching my video. There the worse motor mounts I’ve ever fixed.

Chevy motor mounts suck break all the time