That is pretty much ALL I build these days. Nothing but Chevy Strokers. Mine sound MUCH like yours do. I'm impressed!! And my brother, you are SO right....garbage in, garbage out. If you want an engine that is abuse worthy, high reving, and bullet proof....you have to get the best of parts. 1). FORGED rotating assembly fully balanced internally. 2). Blue Printed Block. 3). Camshaft that has been sized mathematically to the post machining architecture. 4).Proper fuel induction system. All those parts/assemblies cost more than the components of most "Crate " engines. The 383 Stroker I built for my '68 Impala SS has over 80,000 miles on it, and over 100 passes at 1/4 mile tracks. The initial cost to build it 10 yrs. ago was just over $7,500.00, although i already had the 4 bolt main, '69 350 block out of a commercial tow truck.It STILL Chassis Dyno's at 427 Hp@ rear tires. Initial Engine Dyno numbers were: 512 Hp. 486 lb-ft. on pump gas. Red line 7,000 rpm.. So you can keep those not-so-hot $4,500 "Crate" Engines. You get what you pay for, and if a guy invests on the high end at the build, then you are going to have a LONG life engine that almost begs for abuse. The higher priced higher quality parts will end up MORE than paying for themselves. In both pleasure....AND lack of headaches !!

@sparkplug2646

2 жыл бұрын

Unless your pumping out big power you don't need an internally balanced motor.

Got 1 of these Nov 2020. Runs great but there were 5 oil leaks. The breathers bottomed out and it couldn't breathe. Blew gaskets out including front crank and rear main. They sent me a complete gasket kit but wouldn't cover any labor. I will have 20+ hrs in working on it. They should stand behind it better than that.

@fstarockaburns425

2 жыл бұрын

ouch -

@dougbloom3672

Жыл бұрын

Sorry to hear that but appreciate the info. I like these builders , but now i don't know that i would invest 🤔

@matolius

Жыл бұрын

And that’s why they cost more then blueprint.

@alirezashirazifard8990

Жыл бұрын

I’m surprised they don’t respond to your comment. Nothing is worse than unhappy customer. They should respond and solve your problem. I hope some one in that company let the upper management to see that . I was going to order an engine from them for 65 Elcamino but your comments was bad enough to change my minds . Good luck hope they resolve the problem. Please lets stay away from this type of businesses . Lets support our classic loving people. Our money is hard to come buy so let’s not wast it here.

@MrRubberfist

Жыл бұрын

Thanks so much I was about to order a stroker for my '73 Camaro I'm restoring that I've had since I was 20 years old and I'm 45 now (better late than never ha!) but I already have an oil leaker with my '82 shovelhead so I will just go with a local builder here in Portland.

I got also a 383 stroker on my 91 silverado, and it's manual transmission, i replaced the timing set, with gear to gear drive, and now it sounds supercharge, but it's not, parts and all was about $8400 on parts only, well worth the build and money. 539hp 596trq

The answer to your question Sir is very simple, quality before quantity. Stay safe and thank you for sharing your videos

Sweet sounding motor you guys rock

Cam sounds fantastic!

My guess would be quality of parts and workmanship on the machining and assembly

very nicely tuned!!!

Please keep doing this it's the best part of the video. You build beautiful looking and sounding motors great job just keep up the outdoor sound or listen to the exhaust from the Dyno like you use to

I live for brutal camshaft sounds

@bowtiethirteentwenty8627

3 жыл бұрын

She said: Huchabuh, huchabuh, huchabuh. I don't think it was anything too wicked. Did sound healthy though. :)

I have a 383 in my truck putting out 530hp. Great engines, never had an issue with mine. Very reliable.

@sparkplug2646

2 жыл бұрын

What's the compression on that 530hp motor you got?

Very Nice Demo!!! Excellent Engine!!

Please people it's not hooked up to a transmission so of course its going to rev quick.

@ryanlagoda1352

2 жыл бұрын

Best comment possible. 👌

@68chevelleconcours

2 жыл бұрын

So true! Currently I have a really low compression 350 with dish pistons in my chevelle at the moment and it sounds a lot like this one in response to throttle when it just has a flex plate, but it doesn’t stop spinning that fast though.

@phoenixsmith9516

2 жыл бұрын

Let’s see your video with it hooked up to a transmission

When im ready for a awesome engine you are the guy's I will call

@slawdawg23

4 жыл бұрын

I bought this one for my 57. Holy crap does it rock. So strong and starts like a champ. So happy I bought this engine. Cant give enough kudos.

Nice work.

Love this motor ❤

their engine always idle smooth and rev smooth and come back idle smooth, im big fan since 9 years ago. i hope some day i have moneys .

@jezexo

5 жыл бұрын

Win Win I have the money and money for a car that deserve a engine like these but I don't have driving license 🌚💔

Beautiful. Top skill Sir.....

Wow, good sound, good balance. Nice.

Dammit man that is sweet and wow it revs quick as hell would love to have one of these sweet babies

I would love to purchase one of these motors.

I am buying this engine as I write this to put in my 57 Chevy! Can't wait!!!

@charlesmartin7347

4 жыл бұрын

Lucky

@superkas

4 жыл бұрын

Good shit dawg

@slawdawg23

4 жыл бұрын

@@charlesmartin7347 Got the engine, man is it a beast. Dyno'd 460/499.9. Had it over 5 years on about 15,000 miles. Just needed oil. Strong as hell. So happy. :D

@slawdawg23

4 жыл бұрын

@@superkas See above. :D

@slawdawg23

3 жыл бұрын

UPDATE: Still have this engine...still runs like a beast! Have just added high octane, good racing oil and she has been a monster. Could NOT be happier. I am planning on getting another of Doug's engines for my Dad's '57 Chevy and one for a '55 Chevy as soon as I find one I like! :D

Amazing sound and look 😍😍😍😍😍😍😍😍

Bro that is an awesome sounding engine their Boss

Im saving to purchase one of these engines.

Your quality of work is worth the extra money

Love it man that has to be 1 bad engine awesome!!

Dammmm I seriously want one of these 💪💪💪

@derrickschweertman6231

3 жыл бұрын

You and me both

Sounds good that’s what I’m saving for

This guy is awesome

@Shanedog76

4 жыл бұрын

new Yooork

Nice work

Great Video...i can't wait to get back to hot roding

You should do a couple vids without mufflers 💨🔥

@leebob86

4 жыл бұрын

Those Super 10's are basically no muffler. I have two of them on my 80 Camaro. Supercharged 355.

Sounds All there 👍🏁

Beauty !!!! The way that thing revs so quickly and freely is amazing. (Ultralight flywheel ?) Nice work !

@KenHMladin

5 жыл бұрын

It wont rev like that with a load.

@user-ge2qn6gp4o

4 жыл бұрын

It will rev like that with nothing attached to it.

@Merckmodz

3 жыл бұрын

Once the trans is bolted it wont rev as quick. I've built close to stick 350s that rev just like this when I start it on a stand. Bolt that to a dyno and let's see the numbers it pulls. Anyone cant throw a HP number out there...

@lastofthebest5102

2 жыл бұрын

What flywheel? You mean flexplate?

Very nice throttle response on the stroker 383

@user-ge2qn6gp4o

4 жыл бұрын

Yeah, they get that way when they don't have anything attached to them.

@turbo1438

2 жыл бұрын

@@user-ge2qn6gp4o exactly

Very nice!

Will whomever designs those nice chrome power steering pumps redesign the low-pressure inlet so that it goes the right way and not the wrong way. Seems like they always need to be cut and shouldn't they bend in the direction of the steering box?

Beautiful

That sounds Sweet 👍

What cam did you Use

Hi first thanks for sharing I appreciate it. Im curious why do have on the fly wheel. Thank you

That sounds insane

Very nice presentation on comparsion

I would like to know the price so I can get on to go in my 79 camaro

Man this is exactly what I want to build,I am going to have my son help and learn, still a few years before he drives,but never too early to learn. Shoot me a message on price,and also build spec's,and I would greatly appreciate it. And I'll go ahead and respond to the obvious ford guys,saying they all rev that fast with no load,by simply putting it this way. It's when they rev that fast with a load that you get the full appreciation of a stroker,try it sometime.

@kramnull8962

5 жыл бұрын

Like there aren't any such thing as for strokers...

That's sounds like Music beast i think my headers are to small what size is recommended it has 3inch colecters but the intake has inch in a half

I do have a question for you? on your engine is there any reasons that you kept on the flywheel looks a little dangerous

I need one for my 73 c10 stepwise how much

cheap parts,bulk buying that usually drops prices too.shes got a nice crackle to it.looks like March pulleys and other quality goodys that all work in unison. quality and truly valuable professional experience in assembly and engineering it properly before a nut or bolt gets touched . what's the difference between a cook and a chef?a cook knows how, but a chef knows why! thanks ☆☆☆

WoW! I really like that motor 😉 I have a CHEVY G20 van. That I love to drive daily. And mostly like driving on the highway. could this be the engine for that? I'm not really concerned about how many miles per gallon. I'm interested in getting a nice smooth running engine.

@Chris-hx3om

3 жыл бұрын

So here the good news. A more efficient engine (like one of these 383s) is better on fuel.... I'm about to pull 2 engines from a boat (currently a coupel of 350s barely making 200hp). Strip them down and build them up as 383s, but I'll be dropping Vortec heads on them. They won't be 450hp, more like 350, but that means an even smoother idle, and a much flatter, fatter torque curve, just what's needed in a boat...

What can I say, that's the way it is supposed to be!!!!😁😁😎

Awesome

Saving money to get one of those in my 92 chevy s10

I had Noble machine in Oklahoma build mine 575 hp it's a great engine it will light up the tires when I want to it's in a 55 chevy

Hey I’m planning on building a 383 out of my 350 sbc and I’m wondering what company makes good cranks shafts rods and pistons

@bltoverlord3952

2 жыл бұрын

Summit racing

It sounds strong... Are you in the south

I've got one of these in my 71' Pontiac LeMans sport. Funny thing is it's a convertible, I'm saying goodbye to my eardrums

@Chris-hx3om

3 жыл бұрын

No law against proper mufflers.

Is that a Mallory unilite distributor

Haha! Revving the piss out of it.

@davidfirth9342

3 жыл бұрын

It's a sbc

How and were can I get one these bad boys I have 90 GMC 5 speed I would like one these put into my truck

Approximately what is cost of the one in your video

How much turn key for my squarebody?

Very Good!..

I bet you guys could do wonders with my '70 Warranty Replacement 2-bolt 1511 block, huh?

What cam is this?

Awesome freakin awesome

thats a beast

what name and part number of the stroker kit please?

That comment down there is funny, it revs fast because there's no load , buy one put a load on it ,then put another comment here, I bought a 383 from them an with a load on mine ,it don't drag down hardly at all,I just wish I would have bought that 572

@mrcwoodworks4523

5 жыл бұрын

Larry Linneman Buddy negative comments in here but this man know what he is doing I live in Arizona how much would this setup cost me ?

@stevehernandez1637

5 жыл бұрын

How much was it

Sounds tuff

man thats what i need in my burban

@wwchipotlexx

5 жыл бұрын

I had same thought. That is what I need in my burban.

@ronaldjohnson2266

4 жыл бұрын

I just built one to go in my burban

What's the CR?

ill take that one

How much would this one cost

Great

Ta perron primo. I'm going to ask my bank for Mula f*** yeah.

hydraulic roller cam. Thats why their engines are more expensive. you CANNOT get the same amount of horsepower out of a flat tappet cam because the cam lobes can't be that aggressive. I'd love to have them build a stroker 460 BBF for my street truck. a 521 with 575-600 HP would be AWESOME!!!

@user-ge2qn6gp4o

4 жыл бұрын

They can be just as aggressive, just a roller cam will produce a few more horsepower due to less drag and friction from the valvetrain.

How do I get in touch with your company ? I’m interested in a 382 stroker

How much for that turn key 383

@funone8716

3 жыл бұрын

The Turkey or the motor?

Fire 🔥

Quality is everything. What’s your price on one of them 383 Strokers? I got a mud truck project that needs a motor and trans.

@Gator12

5 жыл бұрын

I’ll email you

That would look good in the s-10 build I'm doing with my son!

@camden2941

5 жыл бұрын

they are perfect, and i believe they bolt right in

Is it For Sale

Put a flywheel on it. Any motor will have a fast throttle response when it isn't turning anything!

How much??

Where u based out of

How much money for a 450 horse 383

Omg..I'm in love.....

@jimthomas777

3 жыл бұрын

Dinah Lee , you are in love with an Engine ? Wow , I got a little 327 with 12.1 compression Forged pistons , Vette crank , ported heads , comp cam , aluminum intake , 750cfm carb. Headers Lakewood blow proof Bellhousing , 11 inch clutch , M-21 Muncie 4 speed trans , 12 bolt posi rear end , Screams to the moon at 11,000rpm before the valves start to float , pulls both front tires off the ground in first and second gear It's in a 66 Chevelle Super Sport and gets 3 miles to the gallon , 5 if I'm easy and I'm never easy

@dinahlee3793

3 жыл бұрын

@@jimthomas777 Even that descriprion is sexy!

Do I get a cardboard catch can if I buy one. Nice Throttle response. Lopping cam would sound a lot better if the idle was set at 600 RPMs.

@brad9240

4 жыл бұрын

just about any motor will have that kind of throttle response when it's only spinning a flex plate.

Can you tell me what compression you're using and what's the lift and duration and separation of the cam

@jimthomas777

3 жыл бұрын

Best ways to get higher compression ratio is to get the highest quality pistons you can , plan the heads , find the lowest CC chambers heads , and use a single steel shim head gasket , you will make horse power , don't forget cam , carb and headers

Holy moly! I think that you need a little more oil pressure! Whew...

What about 308 Holden stroker 383. 450hp

Out of curiosity, how could you get it to rev higher? I would absolutely love one day to either get a nascar motor or build one as similar as possible mainly for the sound and also get usability of them.

@dustinhilton5401

6 жыл бұрын

BRAV0 TWO ZER0 if you want sound check out the ls7 with 8 to 1 collector. Just type in 8 to 1 collector exhaust should be in the top 3 videos

@wydopnthrtl

5 жыл бұрын

Shorten the stroke. Like a Chevy 302 (only made 3yrs) or a small journal 327. The longer the stroke vs bore size.. the faster the piston speed.

@user-ge2qn6gp4o

4 жыл бұрын

@@wydopnthrtl Also your camshaft selection will play a roll. You would want to run valvetrain that could handle it. Also you could run lighter pistons and a fluid dampner would help.

@Merckmodz

3 жыл бұрын

Nascar motors are destroyed or shirt stroked motors. You can make motors rev in the 8 and 9 grand range safely doing this.

Can this engine fit in a 1998 chevy cheyenne??? My engine broke down and want to buy a better one. And is it worth buying?

@davidfirth9342

3 жыл бұрын

Lol

I'll take two

This cat was a used car salesman in his previous life lmao

What’s the difference between your 383 stroker engines and summit blueprint engine

@jradish

4 жыл бұрын

they charge a premium cause they're stupid

@stevesalkas9128

Жыл бұрын

Names

Im interested, but I don't think he's in business, I cant locate him.

How much for that