I got bought this fan on Amazon and it's great! I used a Davies Craig 0444 fan controller. I was amazed at how cool it kept my car!

Thanks for the video!

Looks awesome, might do it to my radiator

Gm LT truck engines twin brushless fans Ftw, dirt cheap at the salvage yards and moves tons of air, consume less amps and lighter

I have the same sheet metal brake!

I just subscribed. I forgot. I need those brackets for A-Body Hyraboost only. I have the link but this video brings me to another subject.

@HTMR

6 ай бұрын

howtomotorcyclerepair.com/product/htmr-hydroboost-bracket/

You should use a gasket of some sort. It's gonna be sucking hot air from under hood instead of pulling all through the rad. Is there a splitter between the fans or just wide open in there?

@HTMR

3 жыл бұрын

Yes good point. I plan on putting some edge trim to close the gap. Not sure what you mean by splitter?

@bookrokodil

2 жыл бұрын

thats weird, mechanical fan shrouds have a huge hole and that isnt an issue. maybe stick to viewing instead of commenting things you know nothing about

Hey they just subscribed, great vid and info any video of wiring or if you can possibly so one thanks a bunch

@HTMR

Жыл бұрын

I don't have any wiring videos on this build. Are you looking for fan wiring? I used a pretty reasonably priced PWM fan controller and it works awesome!

@mariochevelle6876

Жыл бұрын

Hell yeah!!! Badass Which radiator are you using? ​@@HTMR

I have a 454 big block I was just looking on Amazon on those fans but I don't see nowhere it says 4000 CFM

@HTMR

3 ай бұрын

ls1tech.com/forums/conversions-swaps/1360479-s-windstar-electric-fans.html

Do you have the part number for the parts used to make power steering pump work for you?

@HTMR

Жыл бұрын

What parts specifically? The pulley?

@tyferguson564

Жыл бұрын

@@HTMR the hoses or adapter from pump to gearbox

@HTMR

Жыл бұрын

@@tyferguson564 I swapped in a 93 grand Cherokee steering box. Late 80's Camaro pressure hose works.

Another question. Did you wire the fans using a relay or an inline fuse? I've had bad luck with relays and prefer a switch. What do you think is best?

@HTMR

6 ай бұрын

I'm using a northern radiator pwm. Slowly ramps up and overall they spin pretty slow, meaning less noise. Costs under 200. Super easy to wire up. Good relays and wiring can easily be 100 and then you get spikes when they turn on. Pwm all the way!

@dubc73

6 ай бұрын

@@HTMR Ok thanks for the info!

@stevepope5484

Ай бұрын

What's pwm? What main harness did u use?

What bench vise is that? Looks stout!

@HTMR

10 күн бұрын

I think it is a morgan 130

Ford Windstar = Peak Performance.

How’s the fan holding out?

@HTMR

2 жыл бұрын

Still on jack stands for another month LOL.

I have these on 3 Ls swaos

Which PWM did you use for the fans?

@HTMR

Жыл бұрын

Northern radiator. Works great.

@Drekoushranada

Жыл бұрын

@@HTMR Thank you very much!

Can I run both of them simultaneously as pullers?

@HTMR

7 ай бұрын

Yes, that is what I do.

@dubc73

7 ай бұрын

@@HTMR Ok thanks!

What’s the link to these fans

@HTMR

11 ай бұрын

amzn.to/3A7rDgZ

What’s the dimensions of the Windstar fan assembly?

@HTMR

3 жыл бұрын

ls1tech.com/forums/conversions-hybrids/1360479-s-windstar-electric-fans.html

What year are those fans

@HTMR

11 ай бұрын

amzn.to/3A7rDgZ

Did you confirm 4000cfms?

@tomkelly3896

Жыл бұрын

No way....all electric fans,are exaggerated....most are 30 to 40 pcnt less than rated

Nice tutorial but you didn't show if it actually works or not the more horsepower you have the more air you need I'm dealing with that right now

@HTMR

2 жыл бұрын

kzread.info/dash/bejne/pn98t9OuiJfAe5M.html My cooling system works great and holds 190-195. 180 tstat and PWM fan controller. Fans barely spin, I'd say 10-15% duty cycle.

How about some long term comments or modifications now that you know ........

@HTMR

Жыл бұрын

It's been a year and 1500-2000 miles and no issues. I have a PWM controller and the fans barely spin (maybe 30% duty cycle max).

2000 cfm over a wider area is still 2000 cfm...not 4000...smarten up....if i install 6 ...3 inch fans that are 2000 each....i dont get 12,000 cfm

@HTMR

Жыл бұрын

Each fan flows over 2000 cfm. What don't you get?

@trailerparkcryptoking5213

11 ай бұрын

Smarten up? Are you an aeronautical engineer or an expert in fluid dynamics? 😂😂😂