Unplug power to freezer BEFORE entering water folks.

@antmarino1

2 жыл бұрын

Correct 😊😊

@SindreEide93

Жыл бұрын

A chestfreezer icebath can be a shocking experience for the body

@kiwicory100

Жыл бұрын

Yes Wim has said the same unplug the freezer !

My 19.8cu. ft comes in tomorrow! So excited. I’ve been running 3 smaller freezers in my kitchen and putting ice into a 100gal tank for about 6 months and then spending 30 minutes every morning refilling the freezer. This will be amazing for time management

Fantastic video. Really helped me set up my chest freezer. Its cooling down now, and I can' wait to use it tomorrow!

@antmarino1

3 ай бұрын

Fantastic! Glad it helped.

Ant just looked at my comments and forgot to add, I am using your DIY for my Ice Bath, living in Darwin it is brutal this time of year and looking for benefits pre and post workout. Biggest problem is overheating and not being able to cool down, great option and post 👍👍👍

@e.m7110

Жыл бұрын

Don't ice bath after lifting weights as the ice therapy blocks hypertrophy.

Great video bro, I started off with baths and then created my own barrel. But just doesn’t cut it anymore especially since in summer so going to try and make one of these next! Thanks for the video!

@antmarino1

2 жыл бұрын

Yeah nice mate, glad it can help!

Nice vid. One tip is the temperature probe. If you don’t position the probe so its sitting in the middle of the tank you will be measuring the inside metal surface of the freezer which is much colder. You’re water will be much warmer than what the probe is measuring. I fitted a short length of rubber hose inside the freezer that the probe is slid into. Its keeps it in mid water and gives much better accuracy.👍

@antmarino1

Жыл бұрын

That's a great little upgrade,. thanks for sharing!

THANKS FOR THIS VIDEO, I THINK THIS MAY BE THE WAY I APPROACH THE ICE BATH.

Finally the video i need to see and what is the proces to make frezzer for ice bath. Thank You!

@antmarino1

Жыл бұрын

Glad it has helped you! 🔥🔥🙏🙏

Good overview. I want to build a home cold tub and these videos are quite helpful.

@antmarino1

Жыл бұрын

Glad it helped!

It was interesting to see that Wim Hof just uses a chest freezer for his cold plunge too! Good vid mate.

@antmarino1

Жыл бұрын

Glad you enjoyed😊😊

This was really good! Very simple and easy compared to a lot of other videos Ive watch. I'll be making one like this for sure.

@antmarino1

Жыл бұрын

Glad you enjoyed and it helped 😊😊

Great video I just wanted to ask you how was your draining and refilling with drain tap fittings.

Great idea ♥️

Well done mate.

@antmarino1

Жыл бұрын

Thanks!

Great work thanks ! I have just ordered all the components !

@antmarino1

2 жыл бұрын

Amazing!

@leelunk8235

2 жыл бұрын

@@antmarino1 THE DRAIN ..WHERE DID YOU GET IT?

@antmarino1

2 жыл бұрын

@@leelunk8235 bunnings

Hey, Have you had any problems with rust or leaking? I also have a metal lined fridge and im thinking of using pond sealer as an interior coating!?

Sounded like your water lasts a long time how do you keep it clean? Good vid.

Hey Ant. Great video 👍 Thanks. How do you maintain the water, and how often do you change the water. Best Regards from Denmark 😀

@antmarino1

2 жыл бұрын

Hey mate, thanks for the kind words! To maintain the water, I don't do anything special, I just empty it once every 3-4 weeks. Take care🙏🙏

Do you carry a boombox with you everywhere you go? You know, just so that you could turn it on and play background music whenever you talk.

Great video mate. Thanks. Have you considered a filter/ozone or does the water still smell fresh?

@antmarino1

2 жыл бұрын

Thanks mate! I hadn't considered a water filter and was prepared to change the water every couple of weeks. It never smelt bad or discoloured or anything weird, just had dead skin in it haha

@PaulWilsonImages

2 жыл бұрын

@@antmarino1 haha cheers

Great video! I'm going to do this!

@antmarino1

Жыл бұрын

Thanks, let me know how you go!

Hi Great Video Ant! whats the name of the freezer the link doesn't seem to work anymore.

Is the temperature probe on the thermometer water proof or do I need to buy water silicone to cover it up?

Letting it ice over could make for a pretty cool ice fishing diorama. :-)

Was that fitting you put into the drain plug something you made or bought and what is it called?

Are you sure no power is stored in the electrical even with it unplugged?

Thank you. I want to get this going as well. Great video.

@antmarino1

2 жыл бұрын

Thank you! I hope it helps you build yours :-)

How did u get the inkbird onto cooling as mine just stays on heating when plugging freezer in??

Any problems with your sealed joints at this point or signs of rusting in the bare metal inside of the freezer?

Such a good idea I'm so sick and tired of buying ice bags

@antmarino1

2 жыл бұрын

Haha I was too!

@mjacked555

Жыл бұрын

Just freeze 1.5 litre bottles of water overnight and let them sit in the tub 20 mins before entering..

@kaelzvibey3878

11 ай бұрын

​@@davidallownot even 10, with ice you can get it to 12-18' degrees but thats about itnunless u have 300kg ice lmao

thanks for the video brother! one question : Do you have to keep the freezer ON when you use the ink bird? isnt dangerous?

@antmarino1

7 ай бұрын

The freezer is on and the ink bird turns the power to the freezer on and off. I also unplug it all when I jump in.

Great video, I am going to do, where did you get the digital thermometer cut off

@antmarino1

Жыл бұрын

The link for it is in the description box.

Best video on how to build ice bath , why did you go 14 degrees shouldn’t it be colder ?? , does the thermoter control when the freezer goes on and off ???

@antmarino1

Жыл бұрын

Thank you so much, appreciate it! The reason I chose 14 degrees was because I wanted to ease myself into it. I do 8 degrees now 😊😊. Yes the thermometer controls when the freezer goes on and off.

Hey ant thanks for the video mate. I’m trying to do the tap section you’ve done at the bottom. Only problem I’m having is the 16mm gcon bit pushes nicely into the freezer but doesn’t go into the 15mm 1/2inch pvc connector that you’ve recommended ?

@antmarino1

2 жыл бұрын

Hey bro, wanna reach out to me on insta (@antmarino1) so I can try walk you through what I did?

@eddiealberton

Жыл бұрын

Hey there not on Insta and need to know how to get the drain set up you have completed. Can I get some help ?

Dude, I am working on one on my channel, can't wait to see what you do with yours. I was going to purchase that digital thermometer through your link, but I am in the USA, and you only have a link for the AU version. You should toss up a link to the same products that are available in the USA.

@antmarino1

2 жыл бұрын

Hey man, thanks for the comment! Glad you enjoyed the vid and that's a great idea, I'll try and do it if the parts are available both in Aus and the USA. I have put the link to Amazon USA in the description for you to find :-)

Have you had an issues with over heating?

Great job mate, really helpful video. The only thing I would suggest is trying to say ‘um’ a little less, it was a little frustrating. Fantastic job tho 👍🏻

very curious how this mod job held up

Where did you get that drain tap from?

Hi mate good info there cheers. Can you pls tell me the make and model of your freezer

@antmarino1

2 жыл бұрын

Thanks for watching! Glad you gained some value from it. If you see the description box on the video it has a link that takes you to the freezer info

Question: when the desired temp is reached how often does the compressor turn on? Also have you noticed a rise in your electricity bill?

@antmarino1

Жыл бұрын

That I don't actually know as I didn't monitor that.

Nice video, nice man. I have been doing this for 6 months, in my non heated swimming pool. It varies from 40-60 degrees depending on the month. September to March. When it’s 60-75degrees I will tether myself and swim in place for 30 minutes. When it’s 75-85 I will swim for 40 minutes. I suggest you try it! Staying in the cooler water for such a long time, freestyle swimming with your head in is amazing! My pool worked good because I could go down 2 degrees per week from 70 to 40 and adjust. When it’s the colder temperature, I just play a couple songs on my phone as the timer . Head dunks are crucial! I saw the other comment trying to find the timer in the u s a . But I can’t see how to find it? Can you please put the make and model number and comment back? You spray the soapy water after you put the silicone down? Before you smooth it with the butter knife? I have been swimming in cold water for 4 years, when we have cold water. I really like it better than the 6-8 minute 40-45 degree plunge. Or the 8-15 minute 45-55 degree plunge. How do you unplug it to not get in with it plugged in? I didn’t see that? Is there a safer way to plug and unplug around eat water? Thanks for sharing!

@antmarino1

2 жыл бұрын

Thanks man! Here is the US link thermometer: www.amazon.com./Inkbird-Temperature-Controller-Controlling-Fermentation/dp/B01HXM5UAC/ref=sr_1_14?dchild=1&keywords=inkbird%2Bthermometer&qid=1635968692&sr=8-14&th=1

Where did u get the drain tap from ?

You can ruin your freezer by not using the right materials and not sealing the drain. JB water weld is the thing that is meant to sort of withstand constant submersion. Only use silicone if you plan on using a liner which is most advisable.

@boabglen

Жыл бұрын

What you mean by a liner that is most visable? I've got a waterproof silicon and was also thinking of adding a pond sealant on top of that

@ucrsae

11 ай бұрын

Aquariums including salt water aquariums have been using silicone for decades. I have never heard of a single failure in the silicone.

hi Ant , i have a chest freezer filled it up and left it on all night it got so hot as in the freezer itself and the motor all around the freezer , but maybe when i get a timer it will shut off and cool down

@antmarino1

Жыл бұрын

Hey mate, it'll get a little hot because the motor is running, but shouldn't get too hot. What temp did the water get down to?

this is really the smart and cost effective way to do this. why would you want to go buy a pond chiller, fabricate come sort of tub and run down 10,000 other things when an ice chest is much more suited to the task and you basically only need 2 other things. a chiller will NEVER reach the temps a chest will and they are very delicate and never last. chest on the other hand will last you easily a decade

@antmarino1

Жыл бұрын

🔥🔥

Where did you get the thermometer

Good video. I have one question. My chest freezer gets an extremly hot surface on the outside during cooling the water down. Is that normal? Does your freezer has this hot temperatures too?

@TheRoyJames

Ай бұрын

Old question but yes it gets super hot. Like i cant keep my hand on it. Normal

THE DRAIN ..WHERE DID YOU GET IT~?

Where do you get the temp prob from please

So, does the probe keep the water cold?

How do you close the lid with the thermostat cable inside, without crunching the cable or breaking the seal?

@antmarino1

Жыл бұрын

The cable is quite thin and the seal is very flexible.

Where did you get that tap component for the drain plug? Definitely need one of those

@antmarino1

10 ай бұрын

Bunnings. All parts used in description.

Just made one last month! 30 days of Pain/Bliss!

How did you put the valve in at the bottom of the freezer to fill and drain the water?

@antmarino1

Жыл бұрын

I used sikaflex to glue it in.

What benefits do you receive from cold plunging? Thanks

@antmarino1

2 жыл бұрын

I find it really helps with my mindset, discipline, helps boost my immune system and helps with recovery from exercise :-)

Hey man thanks for posting this! How do you keep your water clean? I hear ozone machine can help with that. Also is everything still working for you?

@antmarino1

2 жыл бұрын

Hey man, sorry for the late reply. Thanks, glad you liked the vid. The water is a bit of pain to keep clean and I don't want to use any chemicals in there, so I Just change it out every 3 weeks or so. I just sold it actually as I'm moving states and everything was still working mikey mouse on it.

Would you say this setup is better than just buying ice from the store and filling up the bath or a barrel? Thanks

@antmarino1

Жыл бұрын

Yes it's much more time efficient.

Help man mine shows that its 20•C but never puts them down colder , ? Please if someone has an ansewer to help thanks

@antmarino1

11 ай бұрын

What doesn’t put down colder?

Where can I get that drain valve cap contraption you have?

@antmarino1

Жыл бұрын

See description for parts.

Can you please do a video on how you made the hose attachment for the drain?

@antmarino1

Жыл бұрын

Sorry, I don’t have the ice bath anymore.

@antmarino1

Жыл бұрын

What freezer are you going to use?

@Schmarckq

Жыл бұрын

@@antmarino1 What's the reason for getting rid of it? Did it stop working?

@antmarino1

Жыл бұрын

@@Schmarckq I moved states and sold all my shit.

Is 12 degrees really even an ice bath?

How’d that silicone go with cold temps ?

@antmarino1

7 ай бұрын

Yeah perfect! 😊😊

Would a 500l be a decent size for a 6ft2 guy? Or would it be real cramp?

@antmarino1

Жыл бұрын

It would work I reckon!

How often do you change water? Anyway to keep water clean?

@antmarino1

Жыл бұрын

I was changing it every 4 weeks. I've seen people set up pool and spa filters to filter the water once or twice per week so they don't have to change the water as often.

Why you are filling it up with Paste in the inner walls ?

@antmarino1

2 жыл бұрын

That's to stop it from leaking water out through the joins.

I heard if you have a metal lining like yours, you will have rust issues. I have the same type of freezer like yours. I am looking into a way of painting it to protect the freezer from rusting. Has anybody ever painted the inside post a comment how you did it.

@antmarino1

2 жыл бұрын

I've actually sold mine, so don't know if it get's rusty. Good point though!

@shaunb7614

Жыл бұрын

Trying to find an answer to this also. I plan on using an epoxy paint for bath and sinks??

@kontritum2861

Жыл бұрын

I haven't done it myself but I do Remodeling and generalized repair work so I feel I can confidently recommend an epoxy paint, if you can find a good 2 part epoxy paint I'd use it

@shaunb7614

Жыл бұрын

@@kontritum2861 Thanks mate, I gave it a couple coats will see how it goes.

@SlewedDog

Жыл бұрын

There are a few options. Either EPDM lining tucked in, 2-3 layers of something called Pond Shield or more professionally a coating called Line-X.

Temperature never gone up? What's the weather temperature? Maybe that's why?

@antmarino1

Жыл бұрын

Winter, so around the same temp.

Did this rust because you didn’t paint the steel?

@antmarino1

10 ай бұрын

No it didn't.

Did the sealing with silicon work long term? Did it leak? If so, how did you find the leaks? How did your fix the leaks?

@antmarino1

Жыл бұрын

No leaks at all 😊😊

@joells357

Жыл бұрын

@@antmarino1 ty. how long has those original seals lasted?

@antmarino1

Жыл бұрын

@@joells357 which seals?

@joells357

Жыл бұрын

@@antmarino1 the silicon calking

@joells357

Жыл бұрын

?

Is it possible that the water temperature didn’t go up AT ALL in two months?

@antmarino1

Жыл бұрын

In winter, it stayed the same.

Are the any temperature limitations with this setup? Are you able to keep it just above freezing, around 1 degree C?

@antmarino1

2 жыл бұрын

I can't remember what temp it goes down to but it definitely can go to 0 degrees Celsius

@kaelzvibey3878

11 ай бұрын

​@@antmarino1thanks I wanna set it to 1_2 Degrees to do cold plunges every day, this asnwers my question. Blessings bro

@antmarino1

11 ай бұрын

@@kaelzvibey3878 Glad it helps my bro!

Don't chest freezers have a capacitor that holds a charge?

@jackandrews7821

Жыл бұрын

The compressor has a small capacitor if it's not a linear drive compressor that uses DC voltage.

Where does someone purchase the auto turn off thermostat?

@antmarino1

Жыл бұрын

See the links in the description 😊😊

Is there a danger for electric shock ? Are freezers equipped for this ?

@antmarino1

7 ай бұрын

I unplug the power before hopping in.

The Inkbird temperature controller not warming up the water is a concern ... thats its job.

@antmarino1

9 ай бұрын

What's the concern?

I have the same freezer and I’m dealing with rust along the sides. Have you had the same problem?

@rickwheeler75

2 жыл бұрын

anyone else experiencing rust issues? i'm looking to buy one but don't want a rust bucket

@frederickamartinez

2 жыл бұрын

@@rickwheeler75 I just bought a freezer with the metal in the inside. I am looking into painting it to prevent the rust. If you tried that let us know.

@Carnivore_Greg

Жыл бұрын

I’ve got one coming tomorrow and the research I’ve done tells me I should coat with a rubber sealant/paint like what’s used for fountains.

Do you do anything to help inside to prevent rusting?

@antmarino1

Жыл бұрын

No I didn’t.

@brightshadowdenmark

Жыл бұрын

aluminium do not rust ;-) and its food grade, just don't do salt in the water..

Hey Ant. How did this Tub hold up?

@antmarino1

Жыл бұрын

Hey mate, it's still going good, but I would buy one with the plastic liner in it next time.

Could you post which thermometer that is?

@antmarino1

2 жыл бұрын

This is the link if you're in Aus. www.amazon.com.au/Inkbird-Pre-wired-Temperature-Controller-Greenhouse/dp/B078H2738K/ref=sr_1_3dchild=1&keywords=digital+heating%2Fcooling+thermometer&qid=1628466088&sr=8-3

How do you empty and change the water?

@antmarino1

9 ай бұрын

Via the drain tap that I put in the bottom and I connect a hose to it and run it into the garden, which takes a couple of hours to drain.

Hello this setup is great. Does it consume a lot of electricity? How long does it runs in a day.

@antmarino1

Жыл бұрын

Thank you! It didn't consume much electricity at all, especially through winter in Melbourne, as the ambient temperatures helped keep it cold.

How long does it take to drain all the water out bro?

@antmarino1

Жыл бұрын

About 2 hours.

Great man, will never get a flu again!!!

@antmarino1

Жыл бұрын

True! 😊😊

Hey GREAT vid. I've done cryo as well as cold plunge b4. But am going to give ur method a try. How long do you run the freezer each day?

@antmarino1

2 жыл бұрын

In winter, if I have it set to 13 degrees, it never turns on haha. But in the warmer months it kicks on for about an hour a day.

@TheJrj22067

2 жыл бұрын

@@antmarino1 awesome. Ty for the quick response. I move into my new house in Jan. Thats when I will do it. I will give u some updates on how it goes. 👍

@antmarino1

2 жыл бұрын

@@TheJrj22067 No worries! Yeah let me know! You can even send me some pics through instagram if you use it 😊😊

hey mate i know its abit late but if youre doing this for cold therapy wich i assume you are, you should do between 3 - 7 degress anything more then 7 and youll have to stay in there for a long long time to get any of the benefits

@antmarino1

Жыл бұрын

Cheers mate! Yeah I know this, I was just easing into it with warmer temps 😊😊

Aren’t u supposed to use one with a plastic interior?

@antmarino1

Жыл бұрын

these are better, yes

have you had any rust since making this?

@antmarino1

Жыл бұрын

No I haven't 😊😊

@Godzillacock

Жыл бұрын

​@@antmarino1 a previous comment of yours a year ago claims you don't know about it rusting because you sold it. Now you claim it has not rusted....🤔

Can you use bleach like in pools to keep water clean??

@TheRoyJames

Ай бұрын

Hydrogen peroxide is the way to go

Hey mate after 1 year how is that silicone going? I just use sikaflex and it's not sticking so might get this if it worked good? Thanks mate

@antmarino1

Жыл бұрын

Yeah still sealed up soundly😊😊

If youre using the ice bath @ 12 13 or 14 degrees you could just be having cold showers.

are you running into any issues of rust because you're inside is aluminum rather than plastic.

@antmarino1

2 жыл бұрын

I've actually sold it now, but I didn't have any issues with rust as it's aluminium, which doesn't rust.

How is it a year later ??

@antmarino1

Жыл бұрын

Still going strong bro!

i know this is a year old but why 14 degrees? iy should be at least 4 or 5 degrees to get the benefits of cold water immersion

@antmarino1

Жыл бұрын

I started at 14 degrees to slowly let my nervous system adjust to the temp and lowered it over time. I now do 5-7 degree plunges.

@naptimebjj6072

Жыл бұрын

@@antmarino1 oh okay cheers for the reply bro

@antmarino1

Жыл бұрын

@@naptimebjj6072 welcome brother 😊😊

You don’t want it to freeze the ice 😂

How has the aluminum freezer liner held up ? Any rust or issues ?

@antmarino1

Жыл бұрын

I actually sold it so not too sure.

@ohiostatecavs2421

Жыл бұрын

You definitely want one that's not aluminum on the inside. Unless you bought it used and got a deal you couldn't refuse.

Does the freezer come back on if the temperature rises above the set temperature?

@antmarino1

Жыл бұрын

Yes it does 🔥🔥😊😊

How is this working out after a year of use?

@antmarino1

Жыл бұрын

I have actually sold it and spoke with the guy 3 months ago and he said it’s still going great.

@josem9827

Жыл бұрын

@@antmarino1 curious as to why you sold it?

@antmarino1

Жыл бұрын

@@josem9827 I moved states.

A few months later, how is it still holding up?

@antmarino1

2 жыл бұрын

It’s holding up perfect 👌. I did actually sell it though, because I’m moving states. The guy I sold it to has had it for a couple of months and loving it too 😊

I thought you were meant to set it to like 2 degrees

@antmarino1

2 жыл бұрын

From what I read, optimal temp is 10-15 degrees for recovery.

@Purelypr4nks

2 жыл бұрын

@@antmarino1 thanks for the response

@antmarino1

2 жыл бұрын

@@Purelypr4nks You're welcome! 😊