Cheesecake hits hard! (GSCRL Winter Event 2024)
Ғылым және технология
Cheesecake the 1lb combat robot is fixed up and ready to go! I only made a couple of small upgrades this time, but they made a big difference. Cheesecake is coming out swinging, and it's going to take a lot to bring him down!
Event:
www.robotcombatevents.com/eve...
Antweight bracket:
truefinals.com/tournament/e0b...
Livestream:
kzread.infopP8U7EDJ...
Rules:
sparc.tools/wordpress/wp-conte...
The tournament is a double elimination bracket. Each fight lasts 2.5 minutes. You win by disabling your opponent so they can no longer move. If your opponent cannot move, they will get counted out on a ten-second countdown. Even if they can only drive in circles, that is usually enough movement to avoid being counted out. If both robots are still moving at the end of the fight, then the winner is declared by a panel of judges, who score each robot on damage (done to the opponent) aggression (how much each robot initiates the engagements) and control (how much control you have over the fight). Drivers are allowed to tap out at any time during the fight. Drivers may also request one "unstick" if their robot is stuck on the arena.
0:00 - Introduction
0:20 - Upgrades
0:53 - Hypnovision
1:58 - Cheesecake vs Hypnovision
3:44 - Post fight #1
4:17 - Phantom
4:40 - Cheesecake vs Phantom
5:32 - Post fight #2
6:04 - Lowbot
6:25 - Cheesecake vs Lowbot
8:53 - Post fight #3
9:27 - Dulce de Lucha
10:11 - Cheesecake vs Dulce de Lucha
12:32 - Post fight #4
13:02 - Preparation for the grand final
13:38 - Dulce de Lucha
13:56 - Cheesecake vs Dulce de Lucha #2
17:02 - Post fight #5
18:38 - Results
Пікірлер: 209
New attachment could be called the toppings
@mathei2592
4 ай бұрын
or the Frosting
@ConstantlyDamaged
4 ай бұрын
@@mathei2592 I don't think I've ever seen a cheesecake _frosted_ before. Definitely topped with fruit and cream, though.
@ponan0053
4 ай бұрын
The cherry on top
@ItsaJuraff
4 ай бұрын
@@ConstantlyDamaged The Raspberry
@ConstantlyDamaged
4 ай бұрын
@@ItsaJuraff 🤣
Honestly, I'm kinda glad this rivalry between cheesecake and Dulce de Lucha is still going on, it would've been a bit anticlimactic if Cheesecake won the 2-2 score with a 2 in a row finish for 4-2, but with a 3-3 score, it's back to being a tie, and of course we get to see you both continue working on ways to one-up the other. Great fighting all around, can't wait to see Cheesecake take a bite outta the next competition!
@UJGstudiosMUSIC
3 ай бұрын
SAME
Considering what kind of bot Dulce is, it did exactly what it was supposed to, and - even though I'm all in favor of Cheesecake - deserved the win. Very venerable and commendable
i cant believe cheesecake kept ripping off wedges off of every opponent
@bluecraney1
4 ай бұрын
Cheese cake loveswheels
@UJGstudiosMUSIC
3 ай бұрын
@@bluecraney1#FR
You could call the half cake slice Cheesecake's 'Icing'?
@Cl-2048
4 ай бұрын
that would be a better name for the titanium plate
I hope someday enjoy life like Dulce de Lucha's owner watching his robot falling apart while maintaining a smile in his face. Respect.
@motzog
4 ай бұрын
hes just a kid too, some f the best driving i have ever seen from an under 16 yr old! and yeh, big respect to him for keeping his smile on his face!😄
Another killer event! The last fight was definitely close, but watching Dulce manage two fulls pins while defending its wheels from every engagement for three full minutes was incredibly impressive. I would have given them the W too, the driving was just impeccable. Well fought ✌✌
Happy to see cheesecake dishing out some hits
man seeing Cheesecake rip off Mutiple wedges is crazy. I think it shows just how much energy was being stolen from the weapon motor issue referenced at 0:40
@alexsalchemy
4 ай бұрын
Yeah I agree! It's amazing how much energy you lose to seemingly small inefficiencies. I didn't realize that air resistance played such a big role for a long time.
@willrummell3670
4 ай бұрын
@@alexsalchemy Did you optimize cheesecake's weapon's cross section for minimizing air resistance? I imagine the cross section could look like some sort of tear drop shape that changes thickness further from the center of the weapon/motor shaft.
@alexsalchemy
4 ай бұрын
@@willrummell3670 - I did not optimize the thickness in that way because it would be hella expensive. But most swords do exactly what you're describing. Given the restriction of having uniform thickness, ideally my weapon would be a flat solid disk with a single tooth sticking out to best avoid churning up the air, but I don't have that much spare weight. I could make such a weapon smaller in diameter to save weight, but I do want some good reach, so my teardrop shape is a bit of a compromise: it has pretty good reach, without churning up the air too much.
@willrummell3670
4 ай бұрын
@@alexsalchemy appreciate the response- regarding the swords I suppose that makes sense. I never thought of why they tapered towards the tip other than keeping it light. And you’re defo right on keeping it uniform thickness. Keeping the cost down for a part that might need to be replaced every fight should take precedent. Best of luck with the next tourney- I definitely felt this one should have went your way, but I’ve loved keeping up with the journey so far.
Glad to see cheesecake is back! The Beetle horn Claws for Dulce de lucha looked Impressive! They Took hit after hit from cheesecakes spinner, which has been ripping through robots all year!
That sound when lucha's lance and your blade collide ❤
jeez cheesecake is just mangling bots. It is also insane just how reliable your drivetrain is after you switched to those springy wheels you came up with.
Cheesecake's record (as of video) Official fights: 39(35)-13(6) Exhibition fights 0(0)-1(1) Honestly a great showing by Cheesecake for this event. Incredible driving and destruction shown on the side of Cheesecake for the majority of the fights. To be fair the last fight against Dulche was the sweatiest amongst a fair amount of sweaty fights on this video too. Looking forward to the next and good luck to anyone who wants to take a bite of Cheesecake.
Cheesecake dished out a lot of damage! I admire your sportsmanship.
Cheese cake is performing really well, it’s amazing to see how you manage to keep Improving the design
Seeing that final decision in person was heartbreaking. I thought you had it hands-down. My scorecard would have been 5-1 damage to Cheesecake, 4-2 control to Dulce, and 3-2 aggression to Cheesecake. Even if you score aggression for Dulce, that still would have been 9-8 in favor of cheesecake. Unfortunate, but these things happen sometimes when it goes to the judges. Congrats on your great showing, and looking forward to getting to fight you with Hypno/Lowbot next time!
Cheesecake was robbed! The peoples champion is and always will be the almighty Cheesecake! In all seriousness a great video as always 🙏
Cheesecake protec Cheesecake attack But more importantly... Cheesecake eat wheels as a snac
@Swordiy
3 ай бұрын
Beautiful
That lowbot match was a nail biter. You'll get Dulce next time.
i love it when i dont watch your videos. and youtube recommended randomly brings up a new video of yours. so i can binge watch the last 5 videos you made :)
What a delicious rivalry indeed between Cheesecake and Dulce de Lucha.
Congratulations! I really enjoy watching your videos and I think your attitude towards the whole competition is admirable as well. Well done, good sir :).
NICE! Thanks for the great videos
Yaaaayyyyyyy Cheesecake is back~!💛✨
That dodge at 14:41 was unintentional but incredible
Love this channel. Cant wait for the next one.👍👍👍👍
I love your content! Keep up the good work!❤
its cool to see the dulce de lucha kid grow up :)
That's really impressive!
Honestly, the first time I saw this video, I was disappointed by the loss. However, after watching some more background, losing to Dulce De Lucha is pretty poetic and the kid is a great sport. He deserves a win every once in awhile, good for him!
Just a tip. Get a polarizer filter on your camera and you'll get rid of all the reflections in your videos. They're pretty cheap to get for your camera.
happy birthday cheescake
Just subscribed at like 1:00 AM, already a new Cheesecake video out, what a day. 😎
Cheesecake and Dulce De Lucha would make the ultimate Hexbug rivalry pack
petition for Alex to just try making a beetleweight bot. He's consistently shredding his way to at least in the top 3 almost every tournament. I'd love to see him compete there, and there are some *really* good builders there. Also it would just be insane for a 3-pound Cheesecake to fight a bot like Dutch Oven. :)
@alexsalchemy
4 ай бұрын
I'm very slowly working on one!
Happy birthday to Cheesecake!!🎂🎂🎂
This one really felt like a "give it to the underdog" win. Also, what kind of double elim doesnt give advantage to the upper bracket finalist :/ i like the rivalry with dulce but wins like this arent really wins imo. You two are tied in my eyes. Edit: that lobot wedge is hilarious. Easily the coolest Wedge at this tourney. It's a shame the rules favor wedges so much tho, it's like you were fighting a doorstop emporium xD
No SuperLikes until you sign off every video with "Thanks, it's been a slice!"
Happy birthday to cheesecake!
7:36 beautiful wheel snipe
Great video, I love seeing cheese caking rip his way through tournaments. Biggest thing im curious about is why there wast an additional finals round since it was double elimination tournament. This typically means the person coming from losers side has to beat the person from winners side twice to win the tournament as you are only eliminated from the tournament once you have lose twice.
Your Achilles heal has always been your driving skill and missed opportunities.
the editing during the fights is great!
@alexsalchemy
4 ай бұрын
Thank you! I'm glad people appreciate it!
Thanks!
@alexsalchemy
4 ай бұрын
Thank you so much! Cheesecake's gonna get some new wheels!
Love to see this
Great job !
"I was greedy, a lesson learned from a worthy opponent". It's really nice to admit your eyes and explaining it this way. It's appreciated 👍. Good fight anyway, and can't wait to see next encounter !
@levifzephyr
4 ай бұрын
*admit your errors. (I can't modify it🫣)
that protective cake slice did work in round 1! some great matches! i think dulce de lucha was definitely deserving of his win with some great driving on his part also... shame the shield was so weakly mounted - the sword and board made for a cool looking opponent.
cheesecake's layout is kinda cute overall! 😄but i would NEVER try to bite into THAT kind of cheesecake.😧 also, i give you, and the kid driving Dulce De Lucha great respects for your sportsmanship.👏 (btw "Dulce De Lucha" means "Sweet Fight" apparently, so i guess dulce has a sweet tooth! thats probably why he wants a bite out of cheesecake.😅 thanks for this great video Alex.
1 hour after upload and I'm enjoying this
Loved the little pirouette on the sweet tooth in the battle against Lowbot!
Semi Cake-relatated pun for the half wedgelets; The buns. Same idea as "the cheeks" but also relates to cinnimon buns, iced buns, and other kinds of sweet pastries. The fact the commentator started calling hypnovision Hypnodisk made me laugh, I don't blame 'em though.
Secret to winning: name your robot after food
Man, I love cheesecake, this is what combat robotics looks like!
cheesecake will always be a winner in my heart
Man would love to see Cheesecake at NHRL some day!
@alexsalchemy
4 ай бұрын
I've asked if they plan to add antweights to their schedule, and unfortunately they don't currently plan to :( Guess I'd better keep working on a beetle!
HE IS BACK
Dulce's design looks badass Like a Medieval Knight with a shield or a Jouster lol
Can't wait to see a few more rounds, it seems like cheesecake's weapon is significantly reinforced. Didn't see it lose function any of these rounds, that was definitely a weakness last year. Good luck in 2024!
I agree with the judges because if something can survive an aggressive bot like cheesecake and pin it twice for a round, they deserve the win
Eating the cheesecake just brings more doom to you Also one key thing I noticed the back of the chassy keeps getting exposed, could be fixed with smth like a fork or a sweet tooth but every single time cheesecake's back turns towards a horizontal spinner......
I thought you had another shot since you never lost a fight until the finals and Dulce de Lucha did! Great video as always Alex
awesome!
That scoring is a bit ridiculous but it does explain the number of weaponless robots youre facing. I was so confused how those robots would win but that explains it.
Hey. Incase you fight another Hammersaw [like Temper], Go make a new set of Top Armor, Likely out of TPU [the same thing the side armor's made of] or Aluminum. So you don't have to tape on the Top Armor again, unlike Last Time.
Enter more tournaments, we need more cake!
Go Cheesecake!
It's like cheesecake, is the cheese and wheels are the cake. Nom nom nom.
Cheesecake is a tiny tombstone. I love it.
I'm so invested in cheesecake vs dulce now
Next time you encounter Dulce have a sign made up with Cheesecake Factory’s tres leches cheesecake with some silly pun on it
WHAT??? sure he could push you around some of the time BUT you slammed him all over the box and you did all the damage!
awesome
Cheesecake you da bes
I feel like you won that last fight. My only advice would be to find a way to make cheesecake easier to drive, I realize the floor was getting thrashed at the end making it more difficult, but imo the inability to control the bots was everyone’s weakness. There’s got to be a way to make cheese more drive able, the rest is dialed in pretty damn well.
The moment at 14:39 was surreal
You probably know this, and also have reasons for not implementing, but you can increase the kinetic force of the spinning tooth by making it longer without adding weight.
Let’s gooooo
That last fight had me on the edge of my seat. Do the judges tell you the score your earned or just the winner?
@alexsalchemy
4 ай бұрын
They'll tell you the score if you ask, usually they just announce the winner and that's enough.
Have you tried messing with the control rates? Those little bots seem like a handful to control.
10:37 wedge was probably held with one screw which meant it twisted and fell off… now all we need is a reversible weapon
@user-zh2lh4iz8j
4 ай бұрын
my comment was useless lol 12:45
To be fair, rip off the forks is the typical advice for a horizontal. Dulce's mounting is just excellent and the forks themselves are beefier than the majority of others
@alexsalchemy
4 ай бұрын
Agreed!
If you make the sweet tooth reach slightly further than the spinner you can stop it from hitting the wall. This might backfire though if the sweet tooth gets bent up it will stop the spinner from being able to reach the other bot
@alexsalchemy
4 ай бұрын
I've thought about that, but if the sweet tooth was longer than my weapon, it could easily get stuck in the wall, and then I'd be screwed.
new attachment could be called baby cake
cheesecake somewhat channeling his hinner depthcharge at some points in these fights a lot more than in previous tournaments! There seemed to be a lot more gryoscopic force from cake's weapon in general, did you happen to get it to spin faster? or is the new weapon head just that much more powerfull?
You should name the modular attachment the Trowel or Butter Knife since those move cake slices.
That half-wedge half fork setup seems really vulnerable to you simply switching up your spin direction.
Diamond tipped cutting head
Dulce de Lucha Translates to Sweet fight
One day i want to get into this or the hexbug battlebots
so durable omfg
Moar!
I just got into combat robotics and was just wondering if for my weapon I should use a pulley system or connect it directly
@alexsalchemy
4 ай бұрын
For an antweight, I like my direct drive/hub mounted system: it saves a lot of weight and complexity. For a 3lb beetle... well, I'm going to try the same approach, but it may not work out given how hard those robots hit: having my weapon motor out in front might be suicide.
Can i ask how long did it take you to model cheesecake
@alexsalchemy
4 ай бұрын
Well, the modeling itself wasn't too hard (I'm very familiar with CAD, specifically Onshape), it was the design that took a while to create: how the frame is constructed, how the drive motors are held, etc. That was at least a couple months' work before I made the very first prototype.
can someone explain to me the tap out i mean i understand that if you tap out you forfeit but why would you do that if you still have a chance to win????
@alexsalchemy
8 күн бұрын
Well, it depends how good of a chance you think you have. If it's a pretty low chance, and if you can still accept a loss without falling out of the tournament, then you might choose to tap out to avoid taking additional damage and being unable to repair your robot in time for the next fight.
@kelliehefner213
7 күн бұрын
@@alexsalchemy thx
I've grown quite fond of Cheesecake. Ed: that final result was F'ing BS!
gg
cheesecake's weapon sounded much different this time, and and little rattle-esqe near the end
@zavtparticles6828
4 ай бұрын
disappointed by the end, but i can't wait to continue watching Cheesecake's journey through the antweight leagues
@alexsalchemy
4 ай бұрын
Yeah my weapon actually bent a bit from all those hits it delivered; you can see it in the final picture of Cheesecake.
Im curious what cheesecake would do to a rotisserie chicken.
W