Nice job. Spraying the CPS and timing cover plug with brake cleaner or similar before removal can help avoid any debris from entering the engine.

Any basic settings/adaptations that need to be reset via OBDeleven after replacing the timing chain? I have the older Android-based device and the newer NextGen on iOS. I was at -8.71 for “Camshaft adaptation intake bank 1, phase position” with a fully extended tensioner when I got the chain replaced. Post-replacement the OBDeleven Android device is reading -.92 for phase position, but the NextGen is giving a strange phase position value of 29.0°F. Not sure what to make of that, and whether the NextGen expects some kind of reset in order to get an accurate reading.

@BrenoAutoGarage

4 ай бұрын

Wow, that is serious stretch! Was it rattling on cold startup, or running poorly? I am not sure what to make of 29°F, but I will post a pinned comment when I get around to replacing the chain and scan to see what the baseline value is. I do believe it is normal to be +/- 1° on a new chain, at least that is what others online have seen. I do not have any VWs myself, I got the scanner to check this value after my mom sent me the CEL code scanned at a parts store in her town. I wanted to make a video showing my experience, but I am by no expert. I wish there was a dongle scanner like OBD11 for all car brands, very powerful scan and customization options you usually need dealer software to do. Using a laptop with Techstream for my Toyotas gets annoying.

@Plus2-1

4 ай бұрын

This was on a 2013 Audi B8 2.0 TFSI allroad. No rattle, no symptoms at all. Ran perfectly smooth at idle and under load. No DTCs. I inspected the tensioner and could see it was fully extended, so I had the chain replaced as “preventative maintenance” given the state of the tensioner + the phase position value. I’ve determined the OBDeleven device doesn’t always play nice with iOS, in my experience anyway, and the functionality is just better on Android. The iOS app was misreading the camshaft adjustment phase position ° as a temperature value instead of degrees of rotation, so when its Units setting is “metric” you get the correct reading, but if Units is set to “imperial” the app converts what it thinks is a Celsius value to Fahrenheit. The Android app recognizes it’s not a temperature value just because there’s a ° present, so metric/imperial settings don’t change the phase position value.

@BrenoAutoGarage

3 ай бұрын

@@Plus2-1​​⁠ Very interesting, thanks for the reply. Hopefully they will update the iOS app to work correctly, and until then everyone with the issue will see your comment.

Sir mine says 2.2 is that bad?

Hello, Sir. I have a question. The timing chain in my VW Fox 2006 car has stretched. Do you think it's okay to drive 10 miles a day, but only for short distances? Thank you very much in advance for your answer.

@BrenoAutoGarage

3 ай бұрын

I am not familiar with the Fox, so first research if your engine is interference or non-interference. Non-interference no big deal, even if the chain slips or breaks engine should be ok. If it’s interference then it depends on how stretched it is, and how much you want to gamble. If VW spec is +/-5° then I would not to push the engine hard above that. But some people get to 8-9° stretch without issue so you never know...

@rajvadivel8967

3 ай бұрын

@@BrenoAutoGarage thank you very much indeed for answering my message.🙏

loads of oil under the turbo is that coming from the cam cover, cheers.

@BrenoAutoGarage

3 ай бұрын

I’m not sure, but I’ll find out what all needs fixed when I replace the chain later this spring. Thanks for the comment.

Hey could you help out i just bought the scanner but its not reading the phase postion b1 intake its staying at 0.00? It only reads the engine speed and load thats it

@raulraul3417

Ай бұрын

Hi, you solved it? mine is the same 0.00

@BrenoAutoGarage

Ай бұрын

I’m not sure, hopefully someone else will have a solution. I’m replacing the timing chain right now (took a few months to get around to it), I’ll have to play around with the app some more after that’s done.

@raulraul3417

Ай бұрын

@@BrenoAutoGarage Sorry, it was an error or engine was not at working temperature, now it's showing 3.85

What’s the part number on the sensor, mines reading -7.26 .

@BrenoAutoGarage

Ай бұрын

OEM PN: 07L905163C I used this one: www.oreillyauto.com/detail/c/import-direct-ignition/import-direct-3-terminal-multi-purpose-sensor-new/odi0/190163

Is OBDEleven pro or basic version to check timing?

@impactracer

3 ай бұрын

basic

@arturts3296

3 ай бұрын

Both will do the trick

@BrenoAutoGarage

3 ай бұрын

As others said, basic can read the data. You’d only need pro for customizing/programming. I have not tried pro myself.

So on the old style tensioner who man teeth is to much ?

This doesn’t work on my 2018 Tiguan, I can’t get the channel number like you and when I try to lookup the name I can’t find it.

@BrenoAutoGarage

4 ай бұрын

Sorry to hear, I wonder if VW changed something on the newer ones. Aside from google, maybe contact OBD11 and see if they know?

@jeffgroves4533

4 ай бұрын

@@BrenoAutoGarage I was able to figure it out! They changed the name of the channel.

@BrenoAutoGarage

3 ай бұрын

@@jeffgroves4533​​⁠ That’s good news, thanks for the reply. What is the channel # for the newer ones, so others in the comments can find it?

@jeffgroves4533

3 ай бұрын

@@BrenoAutoGarage not a channel number anhmore, you have to type the name in and it’s called “ cam shaft, adaptation intake bank one

My Obd11 screens different I can’t go to channel

@tctunerky

2 ай бұрын

Go to engine then live data

@rich603

2 ай бұрын

Engine > Live Data > search for "Camshaft adaptation intake bank 1, phase position". If it's showing the degrees in Fahrenheit be sure to change units from imperial to metric in the settings.

On my 2.0 tdi I have to take timing belt off for camshaft sensor 🤣. Fuck me I guess.