No idea how this channel came up, but this is an awesome flat fender. Sucks this poor guy passed away too early. Glad his wife is honoring her husband and keeping the Jeep for his son’s. That’s really cool. Every time the go wheeling they will think of their dad and everytime someone like me is looking at the Jeep and saying how cool it is, they will talk about their dad.
@e954rr22 жыл бұрын
Love them old jeeps
@charlesmeier66912 жыл бұрын
I have Just acquired a 48 Willy's Flat fender. The last time I had one was back on the farm over 40 years ago, as teenagers my friend Don and I spent a winter weekend freezing out collective balls off digging it out of the barn, collecting parts, pissing on electric fences, rebuilding the motor, lubing it up, slapping some gas in the tank then taking it out for a test drive and beating the brakes off it. Rinse/Wash Repeat. To say that those were the days would be the understatement of the century. Now I have one again. Total travesty but she is mine. Brings back the air of Old school simple stupid. But also tells you that how small the normal person was back in the 40’s & 50’s. and how small we were as teenagers. When held to current stats, seating /comfort was an afterthought. “It’s tight” is the understatement of the day. (Future modification will be to cut the fender and push the seat back to a more comfortable position.) 4 Cylinder Original shit (Points & condenser. That at current have been shot out burnt out or just F.U.B.A.R. for faulty wiring and not rocking any Spark. They will most likely be replaced with new wiring job and electronic Ignition.) to get my project started I rolled my ass to the parts store and purchased a new battery for the project and arced the starter just to hear the engine make the noise and see if it would actually turn over and do what engines do, somehow I found myself on the receiving end of a overzealous of a nice shot of hot juicy oil across my grill and smiling like a Porn star on the receiving end. F&^Cked up, I know. But sometimes Progress means getting dirty. I Looked like the pivot man in a bukkake video and my friends of course got a good chuckle out of it. It would seem that some unknown person disconnected the Oil Pressure sending unit, Line and gauge and just left that bottom part in the block which was positioned at the correct trajectory that provided me with that fun filled flat fender facial experience. Once I get the wiring correct. Then its time to work on the seating. Being 6'4" rocking about 300 lbs. of built for comfort, not speed the seating is a little tight to say the least. I like how this rig is set up. Especially the Roll Bar. As you noted Room is not one of the attributes of this rig so the roll cage and roof rack are looking good. So that may be plagiarized in the near future. I will also look into the replacement of the steering column with a wonderful tilt O Matic and looking at the pedal positioning I can foresee future adjustments with the pedals . Thanks for sharing
@-oiiio-3993
11 ай бұрын
Do it!
@Trinityforce13
11 ай бұрын
I did. Love some of the Mods that are on that old War Horse. Nothing like a Flat Fender @@-oiiio-3993
@user-ig4ix9ew4s8 ай бұрын
Very good jub ❤❤❤,”God bless you. I have another here in Dominican Republic 🇩🇴 ( use to have another ones, but somebody owner it. It was a ford 1964,war ;but now I only have another like this jeep.
@markkiger52193 жыл бұрын
Outstanding resto mod. My dream Jeep. I suppose to get what you want you substitute goal for dream and start planning. I hope I can find someone to do this good a job when I put mine together, Thanks for posting this.
@rogermontee82642 жыл бұрын
My 46 Willys has dana 44 off set with a locker ,full floater and disc brake kit from Herm the overdrive guy.
@SevenBarSalvage3 жыл бұрын
This has got to be one of the most functional flat fenders I’ve seen! Giving me a bunch of ideas for my CJ3B! Keep the flatty videos coming!
@jaxj36262 жыл бұрын
Very nice and well thought out.
@wfoconcepts
2 жыл бұрын
Glad you liked it!
@EdVentures14042 жыл бұрын
thanks for some motivation for me to get out and work on my 55
@PeterHatton-nm6rn Жыл бұрын
A very sweet ride.
@cgscprspecialist39373 жыл бұрын
Love those flat fenders, had one in high school bought for 600 bucks
@danmcelroy65843 жыл бұрын
One cool capable rig! Glad his kids got it back!
@fastdude200211 ай бұрын
I have my dads 49, I need to restore it similar to this. It already has a Buick V6 ….
@-oiiio-3993
11 ай бұрын
My hot rod 'Flattie' (titled as '46) runs a Buick 225 'Odd Fire' with Kenne Bell intake and internals, MSD, too much carb, fat headers, 4 speed, Warn overdrive... .
@PaulKaiser423 жыл бұрын
Rad rig and a great tribute for the kids to have of their dad!!
@dandolen13003 жыл бұрын
Awesome looking jeep. Great build. I believe those kids will enjoy that jeep. I really like that tilt steering.
@wfoconcepts
3 жыл бұрын
Thanks 👍
@nealesmith18732 ай бұрын
Nice! Very early CJ, almost just like an MB.
@matthewpauls2498
16 күн бұрын
the tub has shovel slots so its military, and on the drivers side so its an MB. the windshield looks like a cj3 but its a military m38 since the center vent is bolted shut
@josemiguelaguilarbrenes33252 жыл бұрын
Fantástico ! Como me gustaría tener uno y con el v - 6 con el que se fabricaron los últimos , una joya de la marca , hoy deben ser tesoros valiosisimos de colección! JEEP , # 1.! 👍👍👏🇨🇷✌️
@frankfilippone96793 жыл бұрын
Love MBs! Especially this one, kids, don’t ever sell dads Jeep
@pablocruise6783 жыл бұрын
Lights in the inner well... super SASSS!!!!
@scottdashnaw23453 жыл бұрын
See this kids ...take care of your stuff..it'll mean something to you one of these days
@demented_cycles3 жыл бұрын
Looks like a well built machine!
@frankfilippone96793 жыл бұрын
Awesome flatty! Can’t find em grind em! lol
@timcaviezel693 жыл бұрын
Love those full floater rears. But l sure do love seeing the hubs on the rear axle. Oh well. Nice tilt/tele. Mr Borreson had that in his 70’s Monte Carlo / a swivel seat. He looked like boss hog. Build is bad ass...
@RADIOACTIVEMASCULINITY2 жыл бұрын
Very nicely built Jeep 💪🇺🇸
@adamforman92643 жыл бұрын
Very well built jeep, hell yeah....😎✌
@coreymitchell14683 жыл бұрын
Holy crap! Let it go everyone. Nice Jeep, ‘nuff said. You make yours the way you want it; it is just a jeep after all.
@muffinman31112 жыл бұрын
Looks like an mb by the shocks
@harveynailbanger3 жыл бұрын
So the only thing 46 is the title... love the mb/gpw stuff. Wish I never sold my 46... Yeah, its a keeper...
@hunterwanabe3 жыл бұрын
Badass Jeep!!
@phimsuoy3 жыл бұрын
Is good story i love it
@josemiguelaguilarbrenes33252 жыл бұрын
Además todo tiene un sentido , súper práctico u funcional👍👍
@longrider1883 жыл бұрын
It's pronounced "Will-is".
@hellwithit2 жыл бұрын
Took out the tanks under the seats?? Nah. Mine was first year for civilian production. Throw out the bumpers. Junk. And plate the frame so it’s boxed.
@hellwithit2 жыл бұрын
302 ci ford. 750 holly dp. Battery between the seats. ? Mine did. Did is the key word.
@sscbkr483 жыл бұрын
A fav new MC of mine is one that looks like it was built in the 40s. Someone should copy and market the 40s Jeep .. so simple.. thanks to effing regs, impossible.. don't forget your face mask. lol.. We're screwed.
@Faq-ubeach
2 жыл бұрын
Late comment...BUT, that's kinda a thing. Google Mahindra roxor.
@ronniegillaspy3 жыл бұрын
I’d take that any day over the crap keep makes today!
@mattlinderkamp94893 жыл бұрын
Badass
@rccrawlking2 жыл бұрын
Who did you have make the rear shafts? Im looking to have a set made for my ‘48
@brookecarter21253 жыл бұрын
Can you run an overdrive with the center section Dana 60
@wfoconcepts
3 жыл бұрын
You really need to have an off set rear end to have an overdrive.
@marymiranda32173 жыл бұрын
That’s an M38 windshield.
@JeepCustomTravel3 жыл бұрын
крутой джип!
@scottpayne47123 жыл бұрын
That’s a 3a windshield. Not a 2a.
@-oiiio-3993
11 ай бұрын
M38. Vent has straps over it, does not open.
@randomcitizen23843 жыл бұрын
Hmm... How about calling it what it is. A highly modified Jeep with a 1946 Willys body. That’s like calling Bigfoot ( the monster truck) a ford pickup. Is that a CJ3A windshield? Those were made from 1949-1953.... recessed headlights on a 46?
@-oiiio-3993
11 ай бұрын
It's not a '46 body, it's a somewhat modified MB (if flat toolbox lids are original). Windshield frame is M38.
Пікірлер: 53
No idea how this channel came up, but this is an awesome flat fender. Sucks this poor guy passed away too early. Glad his wife is honoring her husband and keeping the Jeep for his son’s. That’s really cool. Every time the go wheeling they will think of their dad and everytime someone like me is looking at the Jeep and saying how cool it is, they will talk about their dad.
Love them old jeeps
I have Just acquired a 48 Willy's Flat fender. The last time I had one was back on the farm over 40 years ago, as teenagers my friend Don and I spent a winter weekend freezing out collective balls off digging it out of the barn, collecting parts, pissing on electric fences, rebuilding the motor, lubing it up, slapping some gas in the tank then taking it out for a test drive and beating the brakes off it. Rinse/Wash Repeat. To say that those were the days would be the understatement of the century. Now I have one again. Total travesty but she is mine. Brings back the air of Old school simple stupid. But also tells you that how small the normal person was back in the 40’s & 50’s. and how small we were as teenagers. When held to current stats, seating /comfort was an afterthought. “It’s tight” is the understatement of the day. (Future modification will be to cut the fender and push the seat back to a more comfortable position.) 4 Cylinder Original shit (Points & condenser. That at current have been shot out burnt out or just F.U.B.A.R. for faulty wiring and not rocking any Spark. They will most likely be replaced with new wiring job and electronic Ignition.) to get my project started I rolled my ass to the parts store and purchased a new battery for the project and arced the starter just to hear the engine make the noise and see if it would actually turn over and do what engines do, somehow I found myself on the receiving end of a overzealous of a nice shot of hot juicy oil across my grill and smiling like a Porn star on the receiving end. F&^Cked up, I know. But sometimes Progress means getting dirty. I Looked like the pivot man in a bukkake video and my friends of course got a good chuckle out of it. It would seem that some unknown person disconnected the Oil Pressure sending unit, Line and gauge and just left that bottom part in the block which was positioned at the correct trajectory that provided me with that fun filled flat fender facial experience. Once I get the wiring correct. Then its time to work on the seating. Being 6'4" rocking about 300 lbs. of built for comfort, not speed the seating is a little tight to say the least. I like how this rig is set up. Especially the Roll Bar. As you noted Room is not one of the attributes of this rig so the roll cage and roof rack are looking good. So that may be plagiarized in the near future. I will also look into the replacement of the steering column with a wonderful tilt O Matic and looking at the pedal positioning I can foresee future adjustments with the pedals . Thanks for sharing
@-oiiio-3993
11 ай бұрын
Do it!
@Trinityforce13
11 ай бұрын
I did. Love some of the Mods that are on that old War Horse. Nothing like a Flat Fender @@-oiiio-3993
Very good jub ❤❤❤,”God bless you. I have another here in Dominican Republic 🇩🇴 ( use to have another ones, but somebody owner it. It was a ford 1964,war ;but now I only have another like this jeep.
Outstanding resto mod. My dream Jeep. I suppose to get what you want you substitute goal for dream and start planning. I hope I can find someone to do this good a job when I put mine together, Thanks for posting this.
My 46 Willys has dana 44 off set with a locker ,full floater and disc brake kit from Herm the overdrive guy.
This has got to be one of the most functional flat fenders I’ve seen! Giving me a bunch of ideas for my CJ3B! Keep the flatty videos coming!
Very nice and well thought out.
@wfoconcepts
2 жыл бұрын
Glad you liked it!
thanks for some motivation for me to get out and work on my 55
A very sweet ride.
Love those flat fenders, had one in high school bought for 600 bucks
One cool capable rig! Glad his kids got it back!
I have my dads 49, I need to restore it similar to this. It already has a Buick V6 ….
@-oiiio-3993
11 ай бұрын
My hot rod 'Flattie' (titled as '46) runs a Buick 225 'Odd Fire' with Kenne Bell intake and internals, MSD, too much carb, fat headers, 4 speed, Warn overdrive... .
Rad rig and a great tribute for the kids to have of their dad!!
Awesome looking jeep. Great build. I believe those kids will enjoy that jeep. I really like that tilt steering.
@wfoconcepts
3 жыл бұрын
Thanks 👍
Nice! Very early CJ, almost just like an MB.
@matthewpauls2498
16 күн бұрын
the tub has shovel slots so its military, and on the drivers side so its an MB. the windshield looks like a cj3 but its a military m38 since the center vent is bolted shut
Fantástico ! Como me gustaría tener uno y con el v - 6 con el que se fabricaron los últimos , una joya de la marca , hoy deben ser tesoros valiosisimos de colección! JEEP , # 1.! 👍👍👏🇨🇷✌️
Love MBs! Especially this one, kids, don’t ever sell dads Jeep
Lights in the inner well... super SASSS!!!!
See this kids ...take care of your stuff..it'll mean something to you one of these days
Looks like a well built machine!
Awesome flatty! Can’t find em grind em! lol
Love those full floater rears. But l sure do love seeing the hubs on the rear axle. Oh well. Nice tilt/tele. Mr Borreson had that in his 70’s Monte Carlo / a swivel seat. He looked like boss hog. Build is bad ass...
Very nicely built Jeep 💪🇺🇸
Very well built jeep, hell yeah....😎✌
Holy crap! Let it go everyone. Nice Jeep, ‘nuff said. You make yours the way you want it; it is just a jeep after all.
Looks like an mb by the shocks
So the only thing 46 is the title... love the mb/gpw stuff. Wish I never sold my 46... Yeah, its a keeper...
Badass Jeep!!
Is good story i love it
Además todo tiene un sentido , súper práctico u funcional👍👍
It's pronounced "Will-is".
Took out the tanks under the seats?? Nah. Mine was first year for civilian production. Throw out the bumpers. Junk. And plate the frame so it’s boxed.
302 ci ford. 750 holly dp. Battery between the seats. ? Mine did. Did is the key word.
A fav new MC of mine is one that looks like it was built in the 40s. Someone should copy and market the 40s Jeep .. so simple.. thanks to effing regs, impossible.. don't forget your face mask. lol.. We're screwed.
@Faq-ubeach
2 жыл бұрын
Late comment...BUT, that's kinda a thing. Google Mahindra roxor.
I’d take that any day over the crap keep makes today!
Badass
Who did you have make the rear shafts? Im looking to have a set made for my ‘48
Can you run an overdrive with the center section Dana 60
@wfoconcepts
3 жыл бұрын
You really need to have an off set rear end to have an overdrive.
That’s an M38 windshield.
крутой джип!
That’s a 3a windshield. Not a 2a.
@-oiiio-3993
11 ай бұрын
M38. Vent has straps over it, does not open.
Hmm... How about calling it what it is. A highly modified Jeep with a 1946 Willys body. That’s like calling Bigfoot ( the monster truck) a ford pickup. Is that a CJ3A windshield? Those were made from 1949-1953.... recessed headlights on a 46?
@-oiiio-3993
11 ай бұрын
It's not a '46 body, it's a somewhat modified MB (if flat toolbox lids are original). Windshield frame is M38.