A voice over would be great with this video explaining what you are doing and why.

Well done.

Great video , just wondering when you measure the oil level are you measuring from the top of the fork tube to the top of the oil level inside tube which is the air space at 114mm , and does it matter what position the centre rod is when checking the level . do i take out all dampening adjustments to minimum counter clockwise until it's all back together and on the bike , the manual isn't very clear so thanks again for the step by step video 👍🏼😎

@projektrestoration2470

8 ай бұрын

fill from top, reset everything and then seven as you like! the factory setting is kind of in the middle of these

@bccapone837

8 ай бұрын

@@projektrestoration2470 thank you , so it's 114mm air gap from the top of the oil level to the top of the fork tube 👍🏼

Why does other check the airgap with the damper rode fully compressed? Your method is fully extend then check for 114mm? Which is correct?

I loosened the lock nut under the cap no problem but the cap wont unscrew....the rod just spins like maybe they locktited at the factory HOW do I hold the rod? vise grips?? I dont want to tear anything up....help someone??

Bravo

@projektrestoration2470

Жыл бұрын

Merci ❤️