I bought one from Amazon, just arrived. I tried reading the instructions but I tend to learn better by watching so I saw your channel.I'm not a wood worker nor carpenter by any means but after watching I have a better idea, thanks much. I bought it to save time setting in hinges . I figured it was worth the money.

Thanks for the review. Are those David Clark ear defenders ?

Hello David, looking forward to more router videos.

@dmgladden

3 жыл бұрын

Thanks Ernie yes one on its way thanks for watching

Great video David and thanks for your honesty and£ 20 not bad ? And remember#stay safe and make. 🍺🍺👍👍

@dmgladden

3 жыл бұрын

Your welcome Brian yes I did say I would find and try as cheap as I could but new

Thank you. Just got a 110 model just like this one. I had almost the exact same problem with the edge and roller guides and the attachment screw. The screw I got to attach them is almost 1/2 inch too long to hold the guides. I'll work on a solution and probably keep the router.

@dmgladden

3 жыл бұрын

I guess for the price we have to expect the quality as not being very high just be careful when using it and if possible have a spare on hand

@smitcher

2 жыл бұрын

Same with mine Dan, but also it was too tight to screw in by hand. I ran a tap through it to cut better threads and ground it a bit shorter and it's brilliant now.

Thanks for the video.

I have one like this different color. Main switch at the top, no trust, all the time i remove it the plug, with inaccuracy fence as you demo in video, trying to improve, and a box of router bits 6mm 35 euros i buy it a year ago. Ok i manage it! Thanks for your video.

It comes with a rounded sanding paper. Can you please me what is it for?

I am desperately trying to find a video or something on making a display for my gemstone eggs and spheres. I want to make various size crescent cuts in wood slices that will hold the gems. My eggs are all different sizes. I have an idea of what I want and bought an inexpensive router and Baihens 1/4 Inch Shank Cove Box Router Bit Set Solid Double Flute Nose Bits. Help?

And if you take it apart you will find the metal casing is not earthed and its 50/50 if its switched on the live or neutral. I have four of them set up in custom jigs. I have rewired all of them. Good value if you have the skills to make them safe, and if you don't, but something better.

Nice insight !!!

They have an even cheaper version now, it's 15 quid. They fixed the bolt issues and even include a decent flush bit! They did however do away with the metal housing, it's all plastic now.

@rgbplumbinghilton

2 жыл бұрын

I just got one. It works well and is fairly quiet compared to my old Bosch from the 90's

@ALYDAVIDSON1

2 жыл бұрын

Have you got a link?

@Ziplock9000

3 ай бұрын

link plz

very good video,thanks 10/10

Can you review some cheap router bits please... I use the lidl ones and for 15 euro for 12 bits is great value.. I have the katsu trim router fantastic value for 25 quid

@dmgladden

3 жыл бұрын

Hi mate yes I just did watch for my next video, and that's for watching

Thanks

😂😂 wish I could understand all of what yr saying. Here in Oz we pay $58 for this Ozito Laminate trimmer.

@dmgladden

Жыл бұрын

Sorry Yorkshire lol

cost me 54 quid of amazon. no parts fixing instructions. im lost with the attachment bits lucky i only need it for guitar work.

Hi david im new to your channel im going to be making some bee hives out of wbp plywood that will need so groves cutting out and doing rabbit joints do you think this machine is up to the job thanks oh also ive hit your grey bell

@dmgladden

3 жыл бұрын

Hi Roy first thank you for your support. If you had a very good cutter bit and you really take your time yes it might but for what you are wzntingbto do I would have thought a couple of passes on the saw table would be quicker, or powersaw and straightedge

@roystheboy

3 жыл бұрын

Thank you for your quick reply what decent bits would you recommend

@dmgladden

3 жыл бұрын

@@roystheboy hi your welcome, basicly if they cost over £10 for 1 then there's a good chance they will be good

que marca es esa maquina

I randomly bought this trimmer last week. It came with no instructions or pictures of how all the parts are supposed to work lol just warnings not to use it in the bathtub. Still don't know how to use them after this but a good video anywaus

Brand, Model ????

Well worth £20...available on Wish also

@dmgladden

3 жыл бұрын

Yes Ken prob same company in China

Best cheap trimmer router is the Katsu which is a copy of the Makita one

@dmgladden

3 жыл бұрын

Hi Paul I've never had my hands on that one but in was told this is a copy of the Makita but I have Makita ones and it's got a lot of differences, but that's for the info

@carlcox7332

2 жыл бұрын

I just got a dewinner that's an exact clone of the Makita. Even has the aluminum base for 50$. So far seems really nice. Haven't used it hard yet but has lots of power and the motor sounds really smooth. I mainly just need one for cove moulding and a round over bit so it should be fine for that

Dose it work?

Anyone else have a problem. With the plastic holder slipping and changing depth half way through trimming

@shermanyoung8185

6 ай бұрын

@evergladescreations9641, yes I had the same problem but I was able to correct it by taking the router motor out of the plastic holder and wrapping the motor with a layer or two of black wide Gorilla tape and that make the router fit snuggly in the plastic holder, also you could also prevent from moving by using a large hose clamp, hope this, although this was a year ago you probably found a solution.

From where did you buy it

@dmgladden

3 жыл бұрын

I guess you didn't watch all the video, as I did tell you twice. Please do me the honour of trying again

You fitted the routing bit without disconnecting your power supply 😢

@dmgladden

4 ай бұрын

Hi have no fear it was turned off just I cut that part both off and on just didn't think it was a point I needed to enfersice

@maaw1196

4 ай бұрын

@dmgladden David, please let me apologise because not for one second did I think that you hadn't cut the power off. I was just in one of those moments in time when I had nothing to say, do, or think about other than what I was watching on the TV. I was contemplating making both a planer thicknesser and a router/milling jig so that I could, in some way permanently attach to my bench-saw table. Why don't you play around with the idea as it would save time and space. I've got an idea of what I am looking for but I haven't got a clue how to turn an idea into a practical workshop-friendly machine 😅. I enjoyed the video but I think I'd rather spend a few quid more than trying to make the parts stay where they should be. 😂👍

Nice work! You should clamp the piece before working on it mate you you only get one pair one fingers aye

@dmgladden

2 жыл бұрын

Hi and thanks for the comment and yes your right its always best to be safe as foor me i use this tools at work in some of the most difficult places i guess i get a sense for the danger and to be honest i find routers to be a tame tool

Hi does this router have a plunge feature?

@dmgladden

10 ай бұрын

No not really, just set the depth before you start

Is it compatible for 8mm bits?

@dmgladden

Жыл бұрын

Yes it cam with a 8mm colit

As you're sure as the router your hands are going out of shot because you were zoomed into close

@dmgladden

3 жыл бұрын

sorry

Con respeto te proteges de los ojos y oídos . Y eso asen todos .pero nunca se protegen de los pulmones .hoy en día todo material tiene tanto químico malo para nuestra salud

Good information but would have been better presented if we could see all of you while you were explaining how it works.

@dmgladden

2 жыл бұрын

Really! Why thank you kind Sir

👍👌

It's a Makita 3709 knock-off

@dmgladden

3 жыл бұрын

Yes I guess but only £20 You could buy 10 and still have change

@carlcox7332

2 жыл бұрын

I just got a Makita 0701 clone off Amazon for 50 and came with bits and guide along with other attachments. So far everything runs smooth

Best Intro....ever!!

@dmgladden

3 жыл бұрын

Thanks mate.

Many thanks from eBay

@dmgladden

3 жыл бұрын

Thank you for watching and I hope subscribing

@jabaralanzi9849

3 жыл бұрын

I'm subscriber

@dmgladden

3 жыл бұрын

@@jabaralanzi9849 thank you I have over 400 videos for you to enjoy

Hi the Katsu has a metal base and not must more

@dmgladden

3 жыл бұрын

Yes I guess but the goal was as cheap as I could and the base is not so bad really

@andyh9464

3 жыл бұрын

David Gladden not a criticism just thought it may help your viewers

@dmgladden

3 жыл бұрын

@@andyh9464 Yes Andy that's a fair point thank you

Bro just use the tool