It's amazing how much the prices have changed over the years

These prices are downright insane. I was so mad with them that I built my own photo lights with Meanwell power supplies, Bridgelux COB modules which are 10 000 lm and 90CRI each and aftermarket AMD radiators. The results are very comparable with the CRI 97 light and the price is $80 per light, not $2,630 - what the hell?! for 30 times cheaper, it is really worth doing it myself.

@Victor-tl4dk

3 жыл бұрын

That was 7 years ago.

No mention here of what white balance technique was used, and neither the white nor grey subjects in the clips have been matched together in post, so the whole test is not particularly useful. I don't understand why the actual lights aren't shown either.

@mostlymessingabout

8 жыл бұрын

+Nick Hope the camera was probably left on AWB

@adabrown5886

4 жыл бұрын

Since colors register as normal under tungsten light it is obvious that the camera is set to tungsten. AWB would completely negate the purpose of the test; as would rebalancing in post.

@antoniodominik2975

3 жыл бұрын

i guess it's kind of off topic but does anyone know of a good website to watch new series online?

@chaimuriah4640

3 жыл бұрын

@Antonio Dominik try flixzone. You can find it by googling :)

@dakotalayne7717

3 жыл бұрын

@Chaim Uriah Definitely, I have been using flixzone for years myself :)

I think of buying some CRI 80 5600K lights because they are cheap, and this video convinced me that they might be good enough as flood lights

At 1:18 I think there was some issue filtering the light source on the CRI 98 which totally mess the accuracy of a 98 CRI.

Take guess out of comparison or chart, Get yourself a UPRtek colour meter and you can also measure light spectrum as well.

Really helpfull and clear! Thanks

nice video I would like to see skin colours

How times have changed... 90+ CRI LEDs (5-6k temp up to 750 lumens) are $20 for 4-6 lights. This is why early adopters pay so much more.

@MaximumEfficiency

5 жыл бұрын

lidl sells 17W led with >95cri for a few €

@Mr14abel14

5 жыл бұрын

@@MaximumEfficiency do you have a link?

@MaximumEfficiency

5 жыл бұрын

kzread.info/dash/bejne/k6uTl6aeo7fbg7w.html i'd say it still sucks.

@goodman854

3 жыл бұрын

WHere? I only see 90+ CRI getting me one bulb!

CRI cannot be used in isolation as demonstrated by having a CRI of 98 with a colour temperature of 3200K. To be useful colour rendering measurement needs illumination in daylight temperature range. A warm tungsten is not good enough to render all the sample colours used to measure CRI but because it 'appears' to render them well with a low colour temperature. It's an illusion. CRI is interdependent with the colour temperature of the light source and even LED lights which (can) have a high CRI (>90) and a CCT of >5000K do not render the definitive sample colours well. The holy grail high CRI and good CCT without serious troughs in the power spectrum remains the holy grail.

I use dslrkit walli cri video lights. Can't remember what cri they have but results are quite similar to your 77 and 98 (I didnt compare it to tungsten or anything else).

What brand are the 98 cri lights? I NEED TO KNOW

Where can you buy these lights?

Very halpful. Thank you. It's too bad you don't tell what models of lights you are using tho.

super 👍

Very good video but just remember the "true colors" don't really exist. It's all relative to the light source. The CRI rather is comparing the lights to the colors reproduced by daylight. I am sure you knew this though but just made the video more straight forward.

@travispratt6327

6 жыл бұрын

Lord of the belts: The return of the KING Well our eyes are adjusted to recognize things in daylight every day so I’d say true color is what it looks like in daylight for the purposes of artificial light. Personally I find blue and green lights very annoying and notice them easily, I’ve always disliked leds cause of it but just recently found out about cri and it’s definitely measuring what I like in a flashlight or a bulb. Lately the market seems to be super lumens and lots of blue to get the most light, results in a harsh straining light that hides details and it’s annoying. I still prefer my Mini Maglite although it’s a little too red and a the beam is scattered or blotchy I don’t think I can replace it for less than $30 and be satisfied with the beam. I’m going to try though, I’m looking out for a Nichia 219 flashlight that’s cheap and well made, so far that’s what I’ve found to most likely produce sunlight like light from led. Anyways enough rambling, I think true color is sunlight because that’s what we’ve evolved with, that’s what we see every day and that’s the main light source of our lives, everything’s relative and this is no different but it would be hard to try and claim another light would be the source of true color rather than the sun.

No statement of what camera and lens you used for these examples

I predicted the Tungsten and 98 CRI perfectly. Should have been mentioned that the Tungsten has a CRI of 100

I would like to know how the hell companies can get away with selling even a high cri led panel for 1k+. They are easily making a 90%+ margin on those.

This is comedy gold.

great info but why don't you let us see the light source that you used in this video looks like

So what CRI is better for filming video? More=better? Thanks!

@DrunkenUFOPilot

6 жыл бұрын

CRI tries to quantify how correct colors look to Human eyes. Video cameras have different red green and blue responses, and do a little hocus-pocus color matrix math to make things closer to matching human expectations. CRI doesn't mean much to a camera. But I suppose there are specialized alternative measures. As a color expert, I suppose I should go find out... nah, too lazy.

@mrtechnophile3483

6 жыл бұрын

Daren Wilson if you want to claim to be a "color expert" (which means what, exactly?) then "nah, too lazy" to learn more about the topic may not be your best bet...

But they are not too bright - just 2000lm for a unit, the price is just 90$ with battery on ebay/aliexpress

I'm not bragging, but I hit it right on ;) Yay me!

Would have liked to see some skin tones. That's what really matters, after all.

How about showing us the LEDs you used! You've only done half the review!

CRI doesn't work with LED and sensor colour rendering.

compare to daylight

1000$ for the light? o_O ARE YOU KIDDING?

@cinnabarsonar2072

4 жыл бұрын

You can get 100w >95 CRI LEDs for about 100 dollars nowadays. While professional camera lights can be several thousand, that's still ridiculously overpriced for what they are. Then again, I'm commenting 6 years later, sooooo.

@tvc619

4 жыл бұрын

@@cinnabarsonar2072 5month later - get MARSAWALED 97CRI 40 bucks and make a pan-cake-light-120

THOSE PRICES ARE OVERKILL.......DAYYYYYYS.........ITS ONLY A BLOODY BULB.

@Rivalgamesbg

8 жыл бұрын

+Kevin CCIE You are totally right! You can make your own light million times less expensive than those mentioned it the video and with a better CRI rating...

What were the brands? Seriously. Why not tell us what he was comparing?

CRI 98 but magenta....tungsten is real color SO CRI NOT ACCURATE

I get that it's an old video but my PC & DSLR both combined are cheaper than some of these bulbs! Damn, the world of Pro videography is insane!

@videomaker

Жыл бұрын

LED lights have greatly come down in price.

@danlightened

Жыл бұрын

@@videomaker Yeah, I'm just saying. I had actually bought both my pc and camera 7-8 years ago. I'm just saying that there are pros that did spend that kind of money back then. And that they will be spending that kind of money, if not on LED lights, then something else. Like $10000+ on anamorphic lenses.

Wow, goes to show how blind I am to these colors. Cheapest LEDs it is for me!

Low cri does not matter if you make a Black and White film

@cunty

4 жыл бұрын

well... yes? but who makes those anymore?

You literally called a $1,000 light cheap...you clearly don't understand how simple and inexpensive lights are to manufacture. Yes, even high quality lights are not really that expensive to make on a large scale. You can easily get a light setup for $400 or less with a CRI over 95. There are 1,000 lumen bulbs for $20 each that have a 95+ CRI rating. Get 7 of those, for $140 plus a 7 socket soft box and you're far under $400 with a very high CRI. It wouldn't be very bright by itself and you'd need more lights but still, you're talking about one light here. Oh and I almost forgot; those bulbs that are $20 each, and SIGNIFICANTLY cheaper than the $1,000 LED light that you used with an unknown CRI, EVEN THEY are severely overpriced. They shouldn't cost more than $10 each. So again, lights are not expensive to make. I don't understand why people think these crazy prices are justifiable...

@videomaker

4 жыл бұрын

historically lighting for film and video has been expensive. Shoot an Arri with a high TLCI rating next to the DIY set up you are describing and the difference will be very apparent. It's much more nuanced than you would hope for the price difference, however, if you capture an image with poor quality lights, there is nothing to be done to make it look better in post. in the world of video lights, $1,000 light is cheap, considering the range for a 1x1 LED panel is $30 to $6k on B & H right now. typically the difference is in the quality control of each LED in the light and how many bells and whistles it has. LED's from China are typically not as high quality as those built elsewhere, but if the quality control of each LED is high, then it can be overcome, but likely will still not have as nice of light as a LED from the USA with the same quality control. If the light is bi-color, you are talking about more LED's with less output and RGBWW, you are paying for a light that is as flexible as it gets. a color spectrum of 2200k to 10000k, a gel feature, a special effects mode to emulate a fireplace, a police bar, or even the flashes of paparazzi cameras. we would not recommend if you want the best-looking image to go cheap on your lighting.

CHEAP LED lights ?!?!?? 2,695$ is not cheap in my opinion

@alvinchan929

6 жыл бұрын

more information baout our Ul 2216 LED STRIP :alvinbloggeraddress.blogspot.com/2018/05/cri-90-95-smd2216-led-strip-light-with.html

@tvc619

4 жыл бұрын

One client of mine was selling his house "$5 m, cheap!" that was in advertising. Five millions US dollars for a house, cheap!

1k for an led light? I would rather buy separate leds and make a device myself under 100 dollars.

@videomaker

2 жыл бұрын

Consider the posting date of this video. Thanks for watching.

@sdk1991zzang

2 жыл бұрын

@@videomaker oops! I understand now lol. My bad...

I got 5W LED lights for $8 each. eBay son!

@DrunkenUFOPilot

6 жыл бұрын

But are they rugged enough for video studio work? Bright enough for serious photography, to fill in shadows or light a large background flat?

Low cri makes everything look old

very expensive lights no thank you ill use the aputure 300d its cheaper