Cheap and easy power strop for ridiculous sharp tools

Тәжірибелік нұсқаулар және стиль

Make your own strops for super sharp tools. Here's a power strop you can try safely to put a ridiculously sharp edge on your gouges, chisels and small cutting tools.

Пікірлер: 16

  • @michaelpaterson8340
    @michaelpaterson83407 жыл бұрын

    Throughly enjoy the video. Watched it a number of times.

  • @WilliamBrownGuitar
    @WilliamBrownGuitar7 жыл бұрын

    Some very good ideas here. Thanks.

  • @Monstamonkey
    @Monstamonkey7 жыл бұрын

    Try one of those rubber paint removal wheels as a base for your leather. It should be balanced and centered. You can get ones with a solid rubber wheel. Tried to post a pic but can't for some reason.

  • @More-Space-In-Ear
    @More-Space-In-Ear7 жыл бұрын

    If you want great chisels, try Marples or Stanley.

  • @chriscunicelli7070
    @chriscunicelli70707 жыл бұрын

    Looks good. I was thinking of doing this on a lathe. I might be able to keep the wobble down a little more.

  • @daddyfixesit-th3ls
    @daddyfixesit-th3ls8 жыл бұрын

    I forgot to point out that you can put the drill in reverse and do the opposite side of two sided tools like marking knives, axes, and small whittling and carving knives. You want always to strop in a trailing manner opposite of the normal sharpening method of pushing into the abrasive.

  • @jimdarlow3096

    @jimdarlow3096

    7 жыл бұрын

    very good show

  • @jimwardlow7830
    @jimwardlow78307 жыл бұрын

    I would think glue a 1/4" plywood or steel plate to the bare tool then add the leather to it to make a much better turn table.

  • @coreyshier7526
    @coreyshier75267 жыл бұрын

    Got some good info here and it's a good idea for a power strop, but too much talking... it took too long to get to the point. 9-1/2 minutes is not really a "short video"

  • @usernamemykel
    @usernamemykel8 жыл бұрын

    Just FYI, a jeweler's loupe is pronounced "loop", not "loopay".

  • @WileyR420

    @WileyR420

    7 жыл бұрын

    Those are usually referred to as "carpenter chisels", designed for carpentry, not fine cabinetry.

  • @WileyR420

    @WileyR420

    7 жыл бұрын

    Not intended for a negative comment, just kind of more info. I enjoy your videos and appreciate the info. I've used a plywood or mdf disc in the same way, but I believe the foam pad would work better for gouges since it would conform to the shape of the tool.

  • @daddyfixesit-th3ls

    @daddyfixesit-th3ls

    7 жыл бұрын

    mdf does work fine, ...I should've mentioned that in the video. It's a great instant stationary strop too (with compound) when you need something immediate at hand, though I like leather better overall.

  • @ronmann8619

    @ronmann8619

    7 жыл бұрын

    usernamemykel b

  • @mikewhisky9605
    @mikewhisky96057 жыл бұрын

    Caution: do not use the coors and power tools at the same time.

  • @gregs3547
    @gregs35477 жыл бұрын

    Way too long. This is supposed to be a piece about stropping not about the quality of your tools choice. Would have been a lot better and easier to watch if it had been more to the point no pun intended

Келесі