Thank you for your video's many qualities. Number one... no annoying music. Bravo and cheers.

That was a very good video, thank you.

Hard to beat the Marc Parnes balancer. Looks good

This was excellent.

😲....bike service and wheel balancing!😌🤤🤌 Why do I love it so much! Thx for this. Such a zen little vid!

Nice job thanks you from France 👍

That nail was from another planet. .. that said Ive seen videos where such issue was fixed with double bended rubbet tubing.. ah well... great bike

Should have removed the charcoal cannister holder as well! Great clarity on step by step. thx!!

Super video 👍😁

EXCELLENT!

Thank you!!!!!

Thanks Gamotur, For another exemplary video. I look forward to following your lead. Are you able to recommend the substitute parts? Keep them coming...

@gamotur

2 жыл бұрын

Thank you. If you want to save some money you don't need to buy Servo Buddy, just don't disconnect the electric wires of the original SERVO UNIT. Instead, disconnect the exhaust flap from the Servo Unit (two metal cables). Don't forget to 👍

Top thanks

Thanks, Subscribed! It would have been nice to hear the exhaust note after the flap delete.

@gamotur

2 жыл бұрын

Thanks!!! kzread.info/dash/bejne/f6Od2qZpgMrOmJs.html

🔥🔥🔥🔥🔥🔥🔥

Best non voice how to- period. With the servo buddy, any warning lights? Are you satisfied? Cheers:)

@gamotur

2 жыл бұрын

Almost three weeks and so far no error code. I no longer have to worry that the "flap" will get stuck in the closed position. Plus it sounds better, and I think the engine temperature is lower. I'm still testing. Thank you for the kind words it means a lot to me. 👍

Thank you for the video. Where did you find the mid-link exhaust coupler kit with the Servo Buddy? Can I buy the coupler without the Servo Buddy?

@gamotur

3 ай бұрын

Thank you. Yes, you can buy them separately. Here are the links: The Servo Buddy www.revzilla.com/motorcycle/servo-buddy-bmw-2010-2017?sku_id=1185159 , Butterfly Valve Eliminator www.revzilla.com/motorcycle/remus-butterfly-valve-eliminator-bmw-r-nine-t-2014-2020?sku_id=10181198 . You could do me a big favor and leave a thumbs up under the video 👍

Was hard to remove the old tire and put a new one? Great videos, thank you!

@gamotur

2 жыл бұрын

I did it with the tire machine at my friend’s shop :) Thanks

is there a part number or size for the protection cap used when removing the charcoal canister?

@gamotur

2 жыл бұрын

Part number: 13 54 7 694 924

Are the annakee tires quieter than the karoo 3’s? Thanks for the videos of your r nine t.

@gamotur

2 жыл бұрын

Let me put it this way, Michelin Anakee Adventure feels like slick tires compared to Karoo 3. Much more stable (on the road) and quiet.

there is really no need to extend the vent, just tuck it under the airbox somewhere

great vid! where can I get the hose and hose joiner? and also the breather blank?

@gamotur

Жыл бұрын

Rubber or silicone 4mm inner diameter vacuum hose www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 . As for a hose connector, I used one from car vacuum hose connector kit www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 .

Great video! What year is your bike? I have an 2021....

@gamotur

2 жыл бұрын

2018. Thank You!

Regarding the Exhaust Flap: couldn't you essentially achieve the same goal by grinding off the welds on the flap plate (1:27) allowing its removal leaving only the shaft?

@gamotur

Жыл бұрын

Perhaps 🤔. I just didn't want this extra things on my bike.

I have just ordered a new Urban GS. Can you advise if those over centre bike lifts you are using are specific to the R9T and who makes them. Thanks.

@gamotur

2 жыл бұрын

The golden stands you see in this video are Pit Bull Motorcycle Stands. Front stand is universal and rear is bike specific for single sided swingarm ( with BMW attachment ). The blue stands I used in my other video ( kzread.info/dash/bejne/i3-DpdagdKXQmqw.html ) in the center of the bike are regular car Jack Stands. Too bad R nineT have no center stand. Thank you for comment and don't forget to 👍

@TheShawline

2 жыл бұрын

@@gamotur Thanks Gamotur. Keep up the great vids.

This was Truly FANTASTIC, AWESOME. But my question is, WHAT is/was the POINT Please ??? - I assume the bike 'runs/performs' better, is this correct?? Anything else PLEASE ? Was it 'worth it'? (I am VERY SERIOUSLY considering purchasing one) Thank You and regards. ('OZ' Australia)

@gamotur

2 жыл бұрын

I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles. Thank You and don't forget to 👍

@tpv59

2 жыл бұрын

@@gamotur THANK YOU SO VERY MUCH Sir. GREATLY APPRECIATED. (now I know !!!) - And of course I 'liked' !! Hav a gd 1. Thanks again.

Did you use the charcoal cannister mount for a tool kit holder?

@gamotur

Жыл бұрын

Not yet 😀

What did you do the little disk thing under the plastic cover at 10:15. Did you just leave it open ended when you removed the hose?

@gamotur

2 жыл бұрын

Yes ,leave the "disk thing" 😉( BREATHER VALVE ) only connected to electric wire. Otherwise you will have the engine light on the dashboard.

@cindy_lewis

Жыл бұрын

Greetings, Do you cap off the breather valve where the two rubber hoses come off? I read where you said leave the electrical connection attached.

strange on 2023 model don't see that canisrter in that place.

Cant wait to remove my flapper + canister in a year.. Why did you not remove the canister metal part btw?

@gamotur

2 жыл бұрын

I was thinking to do some kind of emergency toolroll in there

The wheel balancer adapters, what source?

@gamotur

2 ай бұрын

www.marcparnes.com/BMW_Motorcycle_Wheel_Balancer.htm

Just got an '18 Urban GS. The previous owner has removed the charcoal canister but left the original servo unit on the exhaust - not sure if he had removed the flap itself. What do these mods accomplish? Any info or link is appreciated!

@gamotur

3 ай бұрын

You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, caused the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Without the exhaust flap your exhaust will sound a little bit louder.

@andretal6469

3 ай бұрын

Thanks @gamotur!

800gs forks and rear shock next? It will be better than a 1250gs then as you can fix it😂

I enjoyed your film and workmanship but explanation as to why you removed the parts would have been beneficial thanks anyway

@gamotur

2 жыл бұрын

As I mentioned earlier in the comment. "I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles. Thank You and don't forget to 👍"

What happen if i dont remove my charcoal canister ?

@gamotur

Жыл бұрын

Nothing really. Some say that your fuel system gets dirty. I just don’t like anything that I don’t need to run the engine. This is just another thing that “smart” people adding to the engine by law to lower the carbon footprint.

Great video congrats...but may i ask you what are the real benefits that i will obtain removing those 2 things and spend approximately 100 euro for the Servo Buddy and 50 euros approximately for the exhaust adaptor?

@gamotur

Жыл бұрын

You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, causing the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Of course, it's a one in a million chance that this will happen, but knowing my luck I don't want to risk it. 😁

@cristoforopontikas

Жыл бұрын

@@gamotur may i ask you also why is so important to cover as you suggest with a rubber cap the small opening on the left cilinder when you remove the charcoal tube?

@gamotur

Жыл бұрын

@@cristoforopontikas That's where cylinder sucks the fumes from charcoal canister. After removing the canister you HAVE TO plug this hole. Otherwise your engine will run uneven sucking the dirty air.

@cristoforopontikas

Жыл бұрын

The 28Nm where did you get this value? Because in another video i see that are using 20Nm to tight the bolts. Is there any official value? Thanks

@gamotur

Жыл бұрын

@@cristoforopontikas "Silencer and downpipe clamp bolts: 28Nm". Service&Repair Manual

Finally what's for??

@gamotur

9 ай бұрын

For peace of mind. I really don’t think we need this crap on are motorcycles. It’s all for climate change politics and regulations.

Use the charcoal canister to hide a GPS tracker ;-)

@gamotur

2 жыл бұрын

We think the same way 🙂

Hello, thanks for the video. In the canister step, could you indicate where the materials can be purchased? the plug, and the connecting tubes as well as the main tube? Thank you very much.

@gamotur

Жыл бұрын

Hi. The rubber throttle body plug I order from BMW dealer (same as the other side plug) or you can buy it at any automotive store as a vacuum tube/line plug. As for a hose ,any rubber or silicone 4mm inner diameter vacuum hose will do www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 Good luck Buddy and don't forget to 👍👍

@texasaviator

Жыл бұрын

Gonna have to say this is probably one of the best videos I’ve seen so far. Only have one question, What about the small tube you used to connect both hoses, what size would that be? Thanks

@gamotur

Жыл бұрын

​@@texasaviator Hose size is 4mm inner diameter ,so get any tube 1mm smaller to fit inside. I used one from car vacuum hose connector kit. www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 . Thank you! Hit the Like button 👍

@garykegs18

7 ай бұрын

Can I ask the pipe capping is it both sides or just one?

Has anyone ever measured the actual gains/improvements/bennifits the bike? (actual test results...not just "i believe" BS). There is more $$ gone into researching these bikes on so many levels....just "thinking" it makes it better....probably does not.

Sound??? 😳😥🙁

@gamotur

2 жыл бұрын

Sorry. I didn't want to piss off my neighbors :)

What? No start up for us the hear the flap-less exhaust.

@gamotur

2 жыл бұрын

Sorry. I didn't want to piss off my neighbors :)

@kowalski2334

2 жыл бұрын

its not that much of a difference

😂😂😂😂quand je vois la marque d'usure sur le coté du pneu....😂😂vous devez etre tres rapide en virages...😂😂😂

sur une moto allemande: des metzeler...et rien d'autre....😂

pourquoi....mais pourquoi enlever la valve à l échappement ?vous les bricoleurs du dimanche vous avez un niveau technique supérieur aux ingénieurs de chez BMW ? un moteur 4 temps à haut rendement ne marchera jamais si bien que quand la nasse gazeuse d'échappement à des " freinages" bien pplacés par rapport aux régimes moteur....la vanne motorisée est la pour ca ! couple idéal àtout les régimes = maxi performances faites des essais chronometre en mains avec les deux options et passez nous les ré sultats ...merci...bonne roure !

arretez ce massacre.....😂😂 vous pouvez aussi couper la boucle arriere du cadre 😂😂 et enle ver le si lencieux d'origine par un " gadget" tres bruyant qui vous donnera l'impression d'aller tres vite...😂😂😂