If you enjoyed this video, then you'll enjoyed this list of videos that I put together for you! Gravity 980 Overview: kzread.info/dash/bejne/qKpnm5Vmgq23Zso.html Gravity 980 Temperature Test: kzread.info/dash/bejne/rGRmyaecYcmun7g.html Gravity 980 vs Pellet Grill: kzread.info/dash/bejne/Yp5-yLiIn5SzkdY.html

Wow!! What a great video…I followed this video step by step and never even opened the assembly booklet. This is one of the best assembly videos I have seen…so well done. Thanks a million!!!

This is great! I just got one of these and will be assembling this weekend. I will refer to this video a lot, I'm sure. Thanks!

@AndersonsSmokeShow

2 жыл бұрын

Awesome! Thanks for watching and enjoy that new grill!

Thanks for showing how to but it together it probably saved me a hour of frustration. I finished in just about 2 hours too. Plus a few breaks and some cursing when I knocked the open package of bolts and washers off the table. A tip for everyone… unpack everything before you start. I mean everything. Get a couple of tables and lay everything out. It makes it a lot easier. I couldn’t find the axle for 15 minutes only to see it was packaged with the lid handle.

@AndersonsSmokeShow

3 жыл бұрын

Yeah I would agree. I had most of the hardware laid out on my tailgate

Put it together today and my first cook went great. I wouldn’t say the assembly was easy, but your video made it much easier. Thank you for taking the time to make it!

@AndersonsSmokeShow

3 жыл бұрын

It’s a little time consuming but not too bad. Thanks for watching and enjoy that new grill!

I just received my 980 and it came with no manual. I really appreciate your instructions step by step it was the only thing that stopped me from calling Char Griller and lighting them up. Thank you so much.

@AndersonsSmokeShow

2 жыл бұрын

Awesome! So glad to hear that my video was useful!

Mine is being delivered today. Can't wait to see more video's from you on it.

@AndersonsSmokeShow

3 жыл бұрын

I’m cooking on it tonight for the first time. Doing 6 racks of baby back ribs... hopefully the weather here holds up and I can film it. I’m also doing a prime brisket on Monday.

Very well done. The assembly instructions look like they were pretty easy to follow👍

@AndersonsSmokeShow

3 жыл бұрын

Thank you 👍 As long as you have a second set of hands its not too bad! Just heavy as hell! lol

Your video was extremely helpful, made putting it together easy and fun!

@AndersonsSmokeShow

2 жыл бұрын

Glad they helped you Lionel! Thanks for watching

Just found your channel. Great job presenting material. I've subscribed and look forward to more content!

@AndersonsSmokeShow

3 жыл бұрын

Thanks for the support Peter!

Thank you for helping me put this beast together!! I followed your video to the T! Perfect!

@AndersonsSmokeShow

3 жыл бұрын

Glad it helped!

Great job! Thanks for sharing your experience. My neighbor bought one for her husband and asked me to assemble it. I was a little leery until I watched your video. Assembly went together perfectly. Thanks again.

Hoping you can help because I can't seem to find information anywhere. After 3 hours at 240F degree into my rib smoke the fan melted, and not jus a little it was completely destroyed. The flapper was just fine. I am waiting to hear back from Char Griller but I am concerned because I have no idea how this could have happened.

Nicely done. This is an exciting time for the backyard pitmaster, IMHO. The gravity-fed way of cooking is the way of the future. The Masterbuilts, now the Char-Griller, WOW, who's next!. These pits are so much fun to cook on and am definitely looking forward to your review and cooks,. Cheers!

@AndersonsSmokeShow

3 жыл бұрын

I love the gravity feds! Me and a mechanical engineer buddy were drawing up a gravity fed vertical a few weeks ago.... not sure if I’ll follow through with it, but the thought of it’s got me hella intrigued! Thanks for watching Tommy

Awesome video. Followed with you step by step, didn't need the manual. Time for the burn off and then some grilling!!!

I can't wait for the comparison with this and the MasterBuilt!!

@AndersonsSmokeShow

3 жыл бұрын

Coming soon to a theater near you

@keithlucas6260

3 жыл бұрын

Char Grill heats evenly whereas Masterbuilt doesn't and will burn food next to the box. The only thing better on the MB is the cast iron grates which sear the food and the ability to add a rotisserie later. Both apps are about the same.

Thank you so much. It’s 1 AM. You kept me going throughout the whole installation. Your energy, positive demeanor, and easiness to follow kept this job fun and enjoyable. God bless you. This is a phenomenal video on how to install this grill.

@AndersonsSmokeShow

2 жыл бұрын

It’s 1am and I’m still awake editing on a video for tomorrow 🤣🤦🏼‍♂️

@AndersonsSmokeShow

2 жыл бұрын

Thanks for the kind words my friend!

Thanks mate for your videos!!! I followed your video to put my grill together… had no problems at all.

I don't even own this smoker (yet) but wanted to say thank you for taking a ton of your own time to setup, film, edit, and post this video. I am "research first" type of guy and I am extremely thankful for this high-quality video.

@AndersonsSmokeShow

3 жыл бұрын

I’m a lot like you, I don’t make uneducated decisions very often lol. So I make these videos to help other with the same mentality. It’s always great to hear that they are appreciated, so thanks! And thanks for watching

Just got mine put together earlier, thanks to your video.. very helpful. I can't wait until days off to break it in.. I will be missing my pitboss xl

@AndersonsSmokeShow

Жыл бұрын

Glad it helped

It was great to follow along with you as I unpacked and assembled my grill! Thank you. Frustrating those screws that needed loosened to hide the wires near the end…crap one wouldn’t loosen only strip.

Hey, mate. G'Day from Australia. This afternoon I had my Char grill 980 delivered (from Bunning ). Thanks, Char Grill, for your attention to detail, build quality and ' Andersons Smoke Show'; I just followed your video, and it was a breeze.

@AndersonsSmokeShow

Жыл бұрын

Awesome! Glad it helped!

Nice! Been waiting for my Lowes to get some in stock so I can pick one up.

@AndersonsSmokeShow

3 жыл бұрын

Yeah I’ve heard that they are flying off the shelves

Thanks for the help!

@AndersonsSmokeShow

2 жыл бұрын

Glad I could help! Thanks for the support

Wow, that cooker is a beast!

@AndersonsSmokeShow

3 жыл бұрын

Yeah! I’m excited to give it a try, so I’m loading it up with baby back ribs tonight!

Pumped to see what you do with this thing!

@AndersonsSmokeShow

3 жыл бұрын

Ribs and Brisket this weekend! Just hope the weather holds up for the ribs tonight

Your videos are really awesome and another reason to visit the States. Greetings from Germany

@AndersonsSmokeShow

3 жыл бұрын

I appreciate the kind words!!

Nice and Clear. Thanks for the Video just Perfect 👍

@AndersonsSmokeShow

2 жыл бұрын

Thanks for watching

About to put together mine and this is like the 6th time I watch the video. Thank you so much!!!

Ok, having watched this and some of the reviews and cooks on this unit I jumped on the last one in stock at the local Lowes. This video pretty much covers everything you need to know to set up this unit. Excited to fire it up!

8:53 see that white heat strip accidentally tore that how would I replace that

Very good video and well explained. 🙌

@AndersonsSmokeShow

2 жыл бұрын

Thanks!

Almost wish I would have waited to by one, it looks like a very good grill. Good video

@AndersonsSmokeShow

3 жыл бұрын

I’ll be cooking on it for the first time, so we shall see!

Question, I just picked up my grill from Lowe's and there is cardboard in the hopper liner, I took off as much as I could cause I know the brown cardboard should not be there, when I do my burn n seasoning, will that burn off the rest of cardboard that I couldn't get too?

@AndersonsSmokeShow

2 жыл бұрын

I had a little left too but it burnt off during the burn in

Can’t wait.

Putting mine together as we watch your video. Thanks

Great video I’m curious to see the comparison!!

@AndersonsSmokeShow

3 жыл бұрын

Coming soon!

Hey I got an issue I could really use your help on. I can’t find an answer anywhere Mr. Anderson. I just bought the mb 560. Today. Seasoned it at 400 for 30mins. I found I can’t open the lid while in operation. I read through the Manuel to see if it was some dagger feature and it doesn’t say it is? Do you know why I had this issue?

@AndersonsSmokeShow

3 жыл бұрын

So the lid is “locked”?

I ordered one from Lowes, apparently they didn't update their stock online and the order went through, after waiting a week I find out they are out of stock. Does anyone know generally how long it usually takes to get any back in stock?

@robkkorea36

3 жыл бұрын

I orders one on the 3rd of Jun, will be here 11 Jun.

I love my Masterbuilt 1050 grill as well

Excellent video! I have a question. Step 12 requires a silicone gasket. No part number is listed in the diagram. No part number is listed in the parts list. But the part is shown as a separate entity on the diagram on page 12. I have no such gasket. I could not find it in my packaging. Everything has been opened and taken out but no gasket. I texted support and they said it supposed to be pretty-attached to the damper cover. I checked and nothing there or the barrel. Was yours preattached? Do you know where the part was packed in your box?

@AndersonsSmokeShow

3 жыл бұрын

Mine was a thin rubber strip… I can’t remember where it was in the box, but when I got to that step it was not attached to anything. It’s at 12:00 in the video

@mikemorrell2001

3 жыл бұрын

@@AndersonsSmokeShow I actually found my gasket wrapped inside of one of the plastic bags

@AndersonsSmokeShow

3 жыл бұрын

Glad you found it!

Wow Im really diggin that blue color I really like most shades & variations of blue

@AndersonsSmokeShow

3 жыл бұрын

It’s a nice change of scenery for sure

I got one about a month ago, top issues: Meat Temp probe #1 & #2 inaccurate (off by about 30F) and controlling the temp is very difficult, (set temp to 225, it goes up to 285 until I shut all air off to smoker)

@AndersonsSmokeShow

3 жыл бұрын

I personally have never tested my meat probes as I always use my ThermoWorks smoke or signals. I have a video that talks about the temperatures on this grill… I would check it out as it may clear up some discrepancies that you’re experiencing

Great video, mine comes today.

@AndersonsSmokeShow

3 жыл бұрын

Awesome! You’ll love it!

One thing I noticed on mine, and also the floor model at Lowes, is the hopper has some ceramic plates. They are pre-installed, but were wrapped by cardboard. I removed the plates so I could removed the cardboard. Did you removed the cardboard? Perhaps it will just burn up upon the burn-in if you leave it on.

@AndersonsSmokeShow

2 жыл бұрын

Yeah I ripped mine out as well

Not sure if I missed it, but what did you do about the cardboard where the fire bricks are? I took these out, but I haven’t seen anybody mention anything about it in the videos for the 980...

@AndersonsSmokeShow

3 жыл бұрын

I pullled as much out as I could, but there was some left behind

I’m planning in picking one of these up but I make a lot of jerky and I see the lowest temp setting is 200. Do you think that is too hot for jerky or will it work? Maybe you should test it out?

@AndersonsSmokeShow

3 жыл бұрын

Jerky is typically smoked lower than that. I could do that, but it’ll be a bit before it’ll be posted

@noral101

3 жыл бұрын

@@AndersonsSmokeShow 10-4 I’ll be looking for it. Thanks in advance!

I was waiting on you to get one

@AndersonsSmokeShow

3 жыл бұрын

💪💪💪💪

Put mine together today. Burn in and seasoning tomorrow. One question, there is a small 2-wire black cable with a 2-pin connector coming out of the side of the chamber and connects to the controller, what is it?

@AndersonsSmokeShow

3 жыл бұрын

If it’s coming from the left side of the chamber it’s the Temperature sensor

@jayjay1415

3 жыл бұрын

@@AndersonsSmokeShow Thanks. I did find a video explaining what it is. I figured it was a temp sensor. The manual is great for assembly but a big zero for explanations of wiring etc. Can't wait to try this bad boy out.

Just put mine together. Turn on and it gives me an error code for the fan...any ideas? Bad fan from the factory?

@AndersonsSmokeShow

3 жыл бұрын

eRF? If so make sure that the fan spins… if there is something blocking it or stuck it will throw that code… also make sure that your wiring is correct and secure.

Dude, I hate instructions so I just played this video and followed song when I built mine. Way easier. Awesome video!

@AndersonsSmokeShow

3 жыл бұрын

Wow that’s awesome to hear! Glad I could help out!

Hey Andrew just bought mine having a problem keeps saying open when both hopper and ash covers are closed any idea how to fix it

@AndersonsSmokeShow

3 жыл бұрын

Check the wiring. Sounds like either the wiring is not connected properly, or one of the limit switches on the hopper is bad.

@alagbari87

3 жыл бұрын

@@AndersonsSmokeShow checked all the wiring all connected has to be the switch I guess. Thanks it worked during the burn in 3 hrs into smoking it stopped. Appreciate your response

@Cali80zbaby707

2 жыл бұрын

@@alagbari87 I'm looking into these grills for the first time. Check out LSS MODS. There's a known issue with the hopper and fan.

Andrew, Char griller owes you big time for the instruction video. Very helpful

@AndersonsSmokeShow

Жыл бұрын

Thanks!

So I bought this grille Monday and got it put together and noticed the charcoal crate was missingis there any way you could give me the dimensions so I can make one myself called chargriller and they are currently not selling parts for this grille yet

@AndersonsSmokeShow

3 жыл бұрын

They wouldn’t send you one since it was missing?? That’s odd... yeah I’m cooking on it tomorrow I’ll take some measurements for you

@timothygallagher6482

3 жыл бұрын

@@AndersonsSmokeShow I kno Im pretty upset over the situation they said it could take up to 8-12 weeks before i can get the part due to it being new to production they don't have spare parts in there warehouse yet but i would greatly appreciate Im dying to use it lol thank you

@AndersonsSmokeShow

3 жыл бұрын

Char-Griller replied to your other comment

Great video on assembly of this grill. Unfortunately mine didn't go as smoothly. The fan housing does not fit into the side of the hopper. I've been in contact with customer service multiple time without any resolution. I have a 250 pound paperweight. I've sent emails/pictures/measurements as requested and still nothing. Without being able to determine if the fan housing or hopper is out of spec, seems replacing both would be the solution. Another week passes without being able to use, what I hope to be, a great grill.

@joedevlin6311

3 жыл бұрын

Give it a nice hard pop and it should go in

Very good video. Long but well worth it. It answered a lot of my questions but two remain. I would like to see a better view of the internal temp sensor. How easy is it to get to it to keep it cleaned? Next is Chargriller going to make a smaller version to compete against the small Masterbuilt? not all of us have room for such a massive grill.

@AndersonsSmokeShow

3 жыл бұрын

In terms of different sizes, I’m not sure… but I’ve got some contacts I can reach out to. Temp sensor is on the left side just above the bottom rack. It’s pretty accessible

Sweet cooker! Looks well built, looking foward to ya putting it through the paces👍 thanks for sharing Andrew, have a great one brother, you all stay safe!👍👊🍻🍺

@AndersonsSmokeShow

3 жыл бұрын

Hey man thanks for watching! I’ve learned a few things about it already as I’ve done 6 racks of ribs and a brisket! Overall it’s a great cooker and I look forward to sharing more with it!

Enjoy your videos and subscribed to your channel. I just bought a Char Griller Gravity 980 and experienced the same problem as you with smoke leaking around the upper hopper door. I saw that you sealed it with a gasket. Can you tell me what gasket material you used?

@AndersonsSmokeShow

2 жыл бұрын

Thanks for watching Raul! I added the link to the description, but here it is: Gasket used: amzn.to/3uqWIK4

@FireFly14801

2 жыл бұрын

@@AndersonsSmokeShow Thank you very much for your prompt reply. I just ordered the gasket material from Amazon. What do you think of putting some of this gasket material around the main grill cover as well as the firebox door?

How did you take off the card board at the bottom of the hopper liner?? Or just leave it on & let it burn off?

@AndersonsSmokeShow

3 жыл бұрын

I tore off 95% of it and let the rest burn off

@garrywashington6495

3 жыл бұрын

Thanks.... I’m having temp issues hope I don’t have to take it back...

@AndersonsSmokeShow

3 жыл бұрын

What kind of issues?

@garrywashington6495

3 жыл бұрын

@@AndersonsSmokeShow set it at 275 just kept rising...I did look in & see the flap was behind the wire... Ima try again tomorrow hopefully no issues

Does the manifold slide all the way up to the firebox, or do you leave a gap

@AndersonsSmokeShow

2 жыл бұрын

Truthfully I’ll have to look. I don’t remember specifically

@danieljenkins3722

2 жыл бұрын

So, my manifold had shifted all the way to the left while moving it. I moved it back to the right side.Now my temp holds where I set it

Trying to use this video, but I keep getting a 980 with a problem at step 1. Missing thread inserts on the 1st grill and now the new one has something wrong with the main door. I have to push on it for it to close all the way. And there's a nice gap in the rear of the door between the hinges

@AndersonsSmokeShow

2 жыл бұрын

That’s super unfortunate… did the packaging appear to be damaged?

@zachl3402

2 жыл бұрын

@@AndersonsSmokeShow packaging wasn't damaged. Just returned it to Lowes and ordered another one. Hopefully 3rd times a charm

@AndersonsSmokeShow

2 жыл бұрын

Ahh man that sucks…crossing my fingers for you

@zachl3402

2 жыл бұрын

Finally got an undamaged one. Your video was very helpful. Doing the burn in now. Thanks

@AndersonsSmokeShow

2 жыл бұрын

That’s great to hear! Thanks for watching

Picking mine up from Lowes in about 30 minutes! Gonna try and get it built tonight and then burn in tomorrow! Been binge watching all the videos on it haha

@AndersonsSmokeShow

2 жыл бұрын

Awesome! This grill makes some great food

@joemamma2119

2 жыл бұрын

@@AndersonsSmokeShow so I accidently ripped the temp prob connector off during the install... Ordered a new one but I'm going to try and stick it back together so I can actually try it this week haha. Been so excited all week watching videos aannddd then I break it haha.

@AndersonsSmokeShow

2 жыл бұрын

Oh man! Hopefully you can get that fixed!

@joemamma2119

2 жыл бұрын

@@AndersonsSmokeShow I wish I could upload a picture here ha, the replacement part wont be in till at least next week, so with some wire strippers, and a little electrical tape I got it running! 2 Pork butts going on Saturday!

Great video! 10x better than a manual.

@AndersonsSmokeShow

2 жыл бұрын

Thanks!

Waiting on the cook wanting to know your opinion I have mine still in the box in my garage

@AndersonsSmokeShow

3 жыл бұрын

I smoked 6 racks of baby back ribs the other night and they turned out great. I’m doing a brisket tonight

@andreharrison4788

3 жыл бұрын

Are you going to do a video of the ribs ??

@AndersonsSmokeShow

3 жыл бұрын

Unfortunately the weather was too bad to film on Friday. We had like an inch of rain... I’ll do a ribs video soon though

Hey Andrew great vid.BTW your comments on this is blowing up good for u(maybe Dalstrong will pay attention now)

@AndersonsSmokeShow

2 жыл бұрын

Thanks Tim! Hahah maybe they will

Would you say the assembly is more straight forward than the masterbuilt?

@AndersonsSmokeShow

2 жыл бұрын

The masterbuilt has more steps and components but the Char-Griller is larger and harder to assemble alone

An excellent overview! So detailed and clear. Really excited to see what you do with this grill!

@AndersonsSmokeShow

3 жыл бұрын

Thanks! I'm putting it to the test this holiday weekend with 6 racks of baby back ribs and a 17lb prime brisket!

@timothygallagher6482

3 жыл бұрын

So I bought this grille Monday and got it put together and noticed the charcoal crate was missingis there any way you could give me the dimensions so I can make one myself called chargriller and they are currently not selling parts for this grille yet

@Char-Griller

3 жыл бұрын

@@timothygallagher6482 Hey Timothy! Can you email gravity@chargriller.com so we can help?

@timothygallagher6482

3 жыл бұрын

@@Char-Griller I have emailed and called customer service with my issue you can email with your contact info and I will call you tjg6113@gmail.com

It looks like it has an internal metal sleeve for the hopper they have aftermarket mods for Masterbuilt due to the hopper having some of the inner metal bubbling some. I didnt know beforehand about the mods or to purchase a high temp spray to heat treat the inside of hopper. They have brands that range from 700°-1200° like stove bright, krylon, or overhead cam spray all range from $8-$14. I always luv your videos my brotha👍🏾

@AndersonsSmokeShow

3 жыл бұрын

Thanks man! Yeah on the masterbuilt they put a thin metal that they claim is there to keep the fire brick in place during transportation... but they intend for them to burn away over time.... not sure how much I buy that, but that’s what they’ve told everyone. The mods are nice but are pricey too

Hope it worth it. Buying one this weekend. Hope it operates as you mentioned.🙏

@AndersonsSmokeShow

2 жыл бұрын

Hope you enjoy it!

@rayjansen6712

2 жыл бұрын

@@AndersonsSmokeShow grill came damaged, been a week trying to get another, seems like all grills in stock are damaged..🤔😠

Alright guys, I just picked this grill up yesterday (Prebuilt from Lowes). I started to do a burn off and the seasoning process today and I'm noticing that my temps are about 100 degrees higher than what i set on the digital dial. Can anyone provide and explanation and or suggestions on what the issue could be and how to fix it? I really like this smoker and would hate to take it back if its an easy fix.. thanks in advance.

@AndersonsSmokeShow

2 жыл бұрын

Check to make sure the hopper insert is correct… it typically results in lower temps, but there have been several people whose were inserted 180 degrees off

@gregscott5555

2 жыл бұрын

@@AndersonsSmokeShow How do mean exactly? I assumed there was only one way for the hopper to be inserted. The vented side should be inserted facing the cook chamber correct?

@AndersonsSmokeShow

2 жыл бұрын

You’ll see that there’s a sleeve that is inserted from the top. That can be installed backwards

@gregscott5555

2 жыл бұрын

@@AndersonsSmokeShow The sleeve has the fire bricks in it correct? That was inserted with the vented ( for lack of better term) side facing the fire box.. is that the correct way or no? Sorry is these questions seem elementary but unfortunately I didn't put it together it was already done by lowes when I purchased it.

Anyone recall which bag the vent gasket came in? Thanks...

@AndersonsSmokeShow

2 жыл бұрын

I’d have to go back and watch the video…

@ronc4146

2 жыл бұрын

I went through the video, but didn't see. I recall another person asked the same question quite a while ago. They mentioned they couldn't find it, then went back through their bags and found it loose in one....I'm doing the same now. Thanks!

Nice job on this. But I have a extra wiring harness to hook up but nothing to hook it to

@patrickmchugh4894

Жыл бұрын

I figured it out. They could of done a little better job on that. I doing the cure and so far pretty sweet. It has a lot of leaks tho. But I'll get that taken care of

@AndersonsSmokeShow

Жыл бұрын

Its definitely a nice grill! Hope you enjoy!

@patrickmchugh4894

Жыл бұрын

First cook was Iowa chops and bacon wrapped baked potatoes they turned out wonderful. Even nice smoke ring

Hello😃 New sub here . I subbed because your videos are top notch👍i was searching for videos on the 980 gravity ypu covered all the bases . Now my only problem is what charcoal should i use ?

@AndersonsSmokeShow

2 жыл бұрын

I haven’t honestly seen much difference between brands. I typically prefer lump over briquettes though. Thanks for the support!

@ruryp_1528

2 жыл бұрын

@@AndersonsSmokeShow i ask because all i find around here is kingsford and cowboy . I see you use b&b might have to order some off amazon

Got a erp error when I powered mines up

@AndersonsSmokeShow

3 жыл бұрын

I’ll have to look at the documentation to see, but I’ll make a guess and say the wiring is wrong

I came to this video for reference i had mine "professionally assembled " by an associate at lowes and they inserted the charcoal hopper facing the wrong way explains why mine has been struggling to come up to temp 🤦‍♂️ kinda my fault to for not double checking

@AndersonsSmokeShow

3 жыл бұрын

At least you got it figured out!

@migueltrujillo4946

3 жыл бұрын

@@AndersonsSmokeShow the issue i have now is getting it turned around only comes up halfway then gets stuck im also hoping nothing was damaged on the inside from it being faced the wrong way...so for now I'm not touching it going to take it back and have them fix it

Absolutely awesome content!! Help me put mine together fairly easily!! Subscribed!🤝🏿

'Just Like So' channel. 👍👍👍

@AndersonsSmokeShow

2 жыл бұрын

👍🏻

I am a bit nervous about those wires by the hopper burning/melting

@AndersonsSmokeShow

2 жыл бұрын

I personally didn’t have any issues

How hard was it to stand it up

@AndersonsSmokeShow

3 жыл бұрын

It’s not too bad with 2 people, but by yourself it could be tough

Much easier to assemble than the Masterbuild. Better grill too.

@AndersonsSmokeShow

3 жыл бұрын

Yeah I will agree that assembly was much easier

In Will Smith's voice from HANCOCK....GOOD JOB😅🤣😅🤣👍🏾

@AndersonsSmokeShow

3 жыл бұрын

🤣🤣🤣🤣

Looks like you didn’t get the 2 knobs that go on the hopper either 😓me neither

@AndersonsSmokeShow

3 жыл бұрын

I did… I actually missed them in the steps and put them on later when I found them left over

I’m now going to watch your burn off video

Biscuit test! Biscuit test! Biscuit test!

@AndersonsSmokeShow

3 жыл бұрын

It’s coming for sure lol

Why does this guy remind me Pauly jr from American choppers

@AndersonsSmokeShow

3 жыл бұрын

Hahaha you’re not the first to say that... as a matter of fact that’s the 3rd time this week 🤣🤣

i bet that thing can make great chicken wings!!

@AndersonsSmokeShow

3 жыл бұрын

🤣🤣🤣

@AndersonsSmokeShow

3 жыл бұрын

We need a 4th, you should join us.

THATS WHY I PAY FOR ASSEMBLY AND DELIVERY!!!!

@AndersonsSmokeShow

2 жыл бұрын

You live or die by that sword… I’ve seen people struggle to figure out their grills because they weren’t assembled at the store correctly.

And this is why I bought my Masterbuilt 1050 from Ace hardware. Free assembly and delivery lol.

@AndersonsSmokeShow

3 жыл бұрын

Oh there’s definitely a benefit to free assembly and delivery!

This Char Griller looks like it has a better gasket design underneath the lid of the hopper & on the the side of the gravity hopper

@AndersonsSmokeShow

3 жыл бұрын

I think it does too, but one thing that masterbuilt did better were the latches.... they are adjustable on the MB... the char griller doesn't allow you to tighten them for a better seal

...

@AndersonsSmokeShow

3 жыл бұрын

I don’t choose what ads play

@dc8502

3 жыл бұрын

@@AndersonsSmokeShow you must have paid some sneaky add company, just letting you know you don't want that kind of advertisement

@dc8502

3 жыл бұрын

@@AndersonsSmokeShow try getting a better knowledge of advertisement watch a couple of videos on how to do a good advertisement campaign, my suggestion is go with social media it's easier and fasters Advertising it's hard at the begining but still you should invest your time and do it yourself properly instead of paying a 3 party for some shit advertisement.

@AndersonsSmokeShow

3 жыл бұрын

I don’t pay them. Google pays me for ads being played on my video, that’s the whole point behind being a content creator. Therefore I have no control on what is played.... I just get a check at the end of the month

Where is the engineering perspective??? You just follow the instructions book...

@AndersonsSmokeShow

3 жыл бұрын

More of that coming in my next video. It was over 90F at the time I was filming and I was battling two camera that kept shutting off because they were overheating.

That box is fucked up

@AndersonsSmokeShow

3 жыл бұрын

Thankfully the grill was fine though!