Changing transmission rings in the gearbox Toyota
Автокөліктер мен көлік құралдары
toyota hiace Changing of the regular gearbox rings
#gearbox
#transmission
#toyota
Replacing the transmission rings in a Toyota gearbox can be a complex process that requires specialized knowledge and skills. Here are some general steps that may be involved in the process:
1. Drain the transmission fluid: Before beginning any work on the transmission, it's important to drain the fluid from the gearbox. This will prevent any contamination from entering the transmission during the repair process.
2. Remove the transmission: To access the transmission rings, the transmission will need to be removed from the vehicle. This will involve disconnecting any electrical connections and linkages, as well as removing any bolts or fasteners that attach the transmission to the engine.
3. Disassemble the gearbox: Once the transmission is removed, it will need to be disassembled to access the transmission rings. This will involve removing the transmission case and any other parts necessary to access the rings.
4. Replace the rings: With the rings exposed, they can be removed and replaced with new ones. It's important to use the correct type of rings for the specific transmission.
5. Reassemble the gearbox: Once the new rings are installed, the gearbox can be reassembled. This will involve putting all the parts back together in the correct order and torqueing them to the manufacturer's specifications.
6. Reinstall the transmission: With the gearbox reassembled, it can be reinstalled back into the vehicle. This will involve reconnecting any electrical connections and linkages, as well as attaching any bolts or fasteners that hold the transmission in place.
7. Refill the transmission fluid: Once the transmission is back in place, the fluid can be refilled to the correct level.
It's important to note that the specific process for changing transmission rings can vary depending on the specific model and year of the Toyota vehicle. It's always best to consult with a qualified technician who has experience in repairing Toyota gearboxes to ensure that the repair is done correctly and safely.
Пікірлер: 26
This is a in field rebuild that depicts it being repaired and put back into service, without the garage and a lot of tools, and my hats off to this guy for improvising as needed 👍.
Good Video about gearbox. Thanks for knowledge sharing.
Very good job
Thinkyou sir step by step tutorial ang ganda pagka video
Amigo gracias por el videaso
Mantap om
Good
Nice video! What adhesive did you used?
احسنت
❤❤❤❤❤❤❤
Tnxxxxx
@7asn
6 ай бұрын
،🤩
I want innova crysta 3rd gear spares is available plz reply
Apa punca gear 5 melekat
Bhai Thora batain b k ye kis cheez ki girari hai
Me disculpan mis amigos pero ese ensamble no lleva martillo solo para poner pines de las horquillas
Look like AX15 transmission, right?
@7asn
6 ай бұрын
😅
Hello sir..which vehicle gear box..
@dammp8726
2 ай бұрын
Which model which vehicle
Il explique si vite
Foton?
@7asn
23 күн бұрын
??
Way too much sealant used. Extruded blobs of this will drop off into the gearbox, and can block oil passage ways. Even saw large blobs of it smeared over the internal selector when he misaligned the gear cluster when putting it in the case. This is really bad practice.
@7asn
Жыл бұрын
😭
Il explique si vite