Good video. Just a heads up, the SAAB Workshop Information System (WIS) also requires the use of Loctite 518 Flange Sealant on the inside of the new ABS ring prior to installation on the axle. Cheers.

To reduce the amount of grinding, you could heat the reluctor ring (hot plate, torch) so it slides on easier. Thanks for the how-to - very informative, especially noting the hub nut is 32mm (not a socket in most shade tree mechanics tool boxes).

@user-xz3lr5cj8y

Жыл бұрын

Once the rust is fully cleaned off, yes. That would be the reason the old one cracked as the rust expanded the metal

@threejeeps4419

Жыл бұрын

As a follow-up, pulling the hub off of the axle can be a real beast. Years of rust & corrosion makes removal *very* difficult unless you have an impact hammer. Just wanted to let you know what you may be facing.

@threejeeps4419

Жыл бұрын

forgot to add, the shock absorber does not really need to be loosened/removed.

Great video, good length, subtitled, good content. Thanks

Thanks man, helps a lot.

Where do you drive this car? In the desert or on the beach? Or both?

@ingaragewithsaab

Жыл бұрын

why you ask?

@TehSWEED

10 ай бұрын

in a country where we use salt all year around on the roads, basically

cheers, il assume the new gen is the same.

@ingaragewithsaab

2 жыл бұрын

from 2005 to 2009 yes

what year saab is this?

@ingaragewithsaab

3 жыл бұрын

1999

@jjh3455

3 жыл бұрын

@@ingaragewithsaab do you by any chance know if its the same setup and procedure on a 2009?

@ingaragewithsaab

3 жыл бұрын

yes, its the same procedure