Dude you really shouldn't jack up your car on grass. I was terrified for you while watching this video.

Good deal you showed the problem with the gearbox being in the way. Thank you much brother! 🙏

Just did my 09 8P rear main oil seal on jack stands! What a bear of a job! Looks good as a coupe!

Everytime I start a job I’m amazed if there’s not a bolt seized, something stuck, damaged or the wrong size. Good feeling when you’ve done the job though, part of the fun I suppose. 😅

@matimcfetridge

2 жыл бұрын

I feel a bit like that with every job I do, always something wrong haha

If you can even get someone to adjust front Camber (compromising with Caster, which isn't as important) you're doing well! (I like the music btw).

You saved me on that left side front control arm. Thank you Edit: if you don't have that type of ball joint tool a 19mm open ended wrench with a pipe works great

I like the way how much you lovd your car keep it going

@matimcfetridge

2 жыл бұрын

Got to be done mate! Thanks for watching 👍🏼

Lowered mine on racelands. Still needs tracking. Rear bushing gone so I've got both sides like you have just not fitted yet. Off in for k04,injectors,intercooler,clutch. So do it all at same time. Off in on the 9th

Did the same job on my golf gti, used S3 rear bushing and Passat control arms (they are aluminium) as a little upgrade.

This is all excellent stuff: however just order new bushes; consider using 'MEYLE HD' (the HD is important, rather than e.g. Polyurethane, which are too rigid..)? Also order (stretch) bolts via a Febi supplier, def not Audi!

did you get any banging when hitting bumps with the broken control arm bushings? mine are f**ked and the cars been banging over bumps and wandering a little.

hi matt i’m not sure if you’re still reading comments on these later videos but how is the ride quality on these springs?

Do u need to get a 4 wheel alignment after doin this cheers

Did you change your rear subframe as it looks rusted to hell? they all seem to corrode hear badly on the A3's

Can you do a video on changing the door rubbers please.

@matimcfetridge

2 жыл бұрын

The actual door seal?

Please please please use axle stands when working under your car. A neighbour was crushed by a camper van in similar circumstances. I've done it in the pas but it's not worth the risk.

When is side skirt video out pls ? Thanks

I was hoping to see the rear wishbones removed but that bolt does seem an issue. I need to do mine asap as the bush has failed bad and the wishbone twisted and in turn lowering the car on that side. Are you recommending getting a garage to do it? I have the parts already and was going to fit them myself but unsure now.

@matimcfetridge

2 жыл бұрын

I tried mate but it just was not budging, ended up using a recip saw to get them off and it was still a bit of a hassle!

@VeetBallz

2 жыл бұрын

@@matimcfetridge Cheers for the reply mate. I'm going to let me local garage tackle this one for me.

Maybe bent wheels for the wheel wobble at speed?

@matimcfetridge

2 жыл бұрын

after tracking and replacing these parts its gone away! thankfully... was worried as the wheel was my next guess

Can you do a video on how to change the headlight bulb?

@Michael-pd4wu

2 жыл бұрын

Ones easy enough just twist the carrier the other one there’s f all room. There’s vids on here one where a fella has a mirror to show the carrier and how it sits.

@AA-dm1gl

2 жыл бұрын

@@Michael-pd4wu There is more to it, I think the front bumper has to come off or remove front wheel arches and access this way?

@Michael-pd4wu

2 жыл бұрын

@@AA-dm1gl you can do it without by removing the wheel arch liner and a bit fiddling. Trust me it’s a lot less screws.

what id give for some land like this. i have to do mine on the main road :(

I have audi a3 2019 2.0tfsi quattro driven like 80k and the front end start to make a squeeling sound whenever I turn right or left at 10-40km speed or thru speedbumps etc.. is this normal? I think its the control arm rubber? I greesed them well and the sound left like for a day and it came back the next day..

@RaNdDom345

11 ай бұрын

The control arm is in well condition too ane the rubber as well but it still make the rubber squeeling sound..

Mati, what is the model / name of these wheels? Are they 18"?

@o0chris0o1

Жыл бұрын

Le man's wheels

Did this sort out the wheel wobble ?

@matimcfetridge

Жыл бұрын

Yes, she tracked up beautifully afterwards!

Working under a car supported by a hydraulic trolley jack...with an axle stand to hand. 🙄

Mate please please don’t ever Jack your car or put axle stands under on grass. It will kill you in the most horrific way. I’ve known 3 people who’ve died under vehicles by jacks or chocks or ground moving. Always use on flat hard surface. Preferably concrete. 👍🏻

Dude. If youre gonna jack your car up on grass, use the freaking jackstand. Put it on a paver or a board too. Please and thanks.

Hey man,tell me please,from what car is that rims and whst sizes?