Thank you Alex for this ❤

Thank you so much for this, going to be doing this when my router / modem arrives

Great info ❤

Fantastic video Alex and Jed as always!! 👍🏼

EXCELLENT VIDEO ❤

Alex, I really appreciate all the information and experience that you share with us on your channel. Keep up the great work.

tbh that actually helped , THANK YOU

Changing my 5g band from auto to 80MHz brought my speed up about 150mbps. Good stuff, thanks! May have to consider a mew router that has a lot more options to configure, no telling if 120Mhz could make it faster (i get half the speed I should omnthe very best of days, and that's just now after changing to 80Mhz). Just changed provider and have the basic router that they give you. Thinking about an Asus router.

Well I just got an FritzBox 7530 AX and when I go to change the 5 GHz channel it doesn't show any MHz like in your case , it is simply named from channel 36 to channel 128 and that's it. Doesn't show any MHz in the settings

Question, if im wired gaming does the router type/brand matter?

Thank you

What do you use to have those moving backgrounds on TV, greetings from Cuba

Please can you advise me as to why my sim router stops supplying internet anytime I start UDP connection on any VPN?

You are great pal 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Hey man, I was watching this video trying to separate my bands… finding out my sky wifi max router actually doesn’t allow that just yet? Just wondering if you have any substitutes for this?

dawg tysm ily

Do you have any recomendations to set up two erro routers foe the best mesh coverage. Thanks. Ken

@futurecactus

Жыл бұрын

Ideally, the 2 mesh nodes should be at opposite ends of the house but still able to communicate effectively. If you have ethernet cable run already or if you can run some, put them further away from each other and connect them with a cable, this gives them a guaranteed high speed connection and good coverage of the house, so long as they're not too far apart and the middle is in a dead zone. Also consider any high WiFi traffic rooms and consider placing one closer to that room. If you're using wireless backhaul, ie not connecting them via a cable, then put the first one where it needs to be, usually near the ISPs connection inside the house, and then run a speed test with a device plugged into it with a cable, this will give you your max attainable speed. Next, walk around and plug the second mesh node into several places around the house and run a speed test with a device plugged into the second node, this will test the wireless link between the primary and secondary nodes. Choose a spot with a strong link and then walk around with your phone doing further speed tests everywhere you want WiFi and check that you're getting acceptable speeds relative to your max attainable speed.

Thanks for the help, I had a question about the 2 frequencies, I thought you have to change the name for each to separate them?

@futurecactus

Жыл бұрын

You do, I believe that when he referred to them as having the same name, he meant they were combined.

Love the green leafs led video playing behind you

Will two wifi access point using different ssid but same wifi channel interfere with each other

@dhoomyaq

2 ай бұрын

yeah theres no way around this issue besides wired connections

What iPad are you using Alex?

thanks bro you make m day it works for me to change to 11 chanell and a take all 50gbs on m phone now before i get like 2 mbbs

Hi, I purchased a TP-Link Archer AX53 to replace the router that Sky provided, when connecting the internet connection into the Archer with won't output internet light remains amber and no WIFI. I can only get it to output if I put a patch cable from sky router two the Archer AX53. Do you have any tips?

@D2D_URBEX

7 ай бұрын

Try going into router settings and enable Radio setting which activates WiFi

@justingreen86

7 ай бұрын

@@D2D_URBEX it’s not seeing the internet to even then share it via the wifi and wifi is enabled anyways

@D2D_URBEX

7 ай бұрын

@@justingreen86 is operation mode switched to router mode

@D2D_URBEX

7 ай бұрын

I have a Virgin Media Router with cable to my Asus to make it work (depends on router if it needs this so you don't need to do this) then cable to laptop. Configure the router by going to setup page 192.x.x or whatever it is to set up

@justingreen86

7 ай бұрын

@@D2D_URBEX yeah that’s only way I can get it to work connect sky one to the tp link one then the tp link one outputs WiFi.

3:28 no links in the description.

If you disable the UPNP, won't that then cause issues with NAT Types on xbox online gaming?

@futurecactus

Жыл бұрын

It may but it's worth a try to see because it's easy enough to change back. I always have it switched off and never have a problem gaming on PC or PS.

@tdrg_

7 ай бұрын

It also affects PS Remote Play. You should use port forwarding as an alternative, but be careful.

i have bt wifi if i change my dns to cloudflare will it disconnect all my devices or not?

@PhantomScottZ

Жыл бұрын

No your WiFi shouldn't be affected. It should only affect your internet browsing experience as a whole on the device you're using

@futurecactus

Жыл бұрын

It definitely won't disconnect your devices but be aware that your devices don't have to use the DNS you set in your router DHCP settings either. It's worth customising but, for example, Google devices like Chromecast will still use Google DNS.

Why dont you use the option smart connection to display only one name ?

Doing a speed test and changing the servers does affect download and upload speeds. Also anyone using the isp modern router and is not happy change it to modem mode and buy a better wifi router and not mesh only recommended if you do not have cat cable routed in the house.

UPNP should always be off. Very risky to leave enabled.

@przemekustarbowski

8 ай бұрын

True if sharing network with unknown people. False if using in trusted home environment - then it's no problem and gives benefit. 2 sided thing.

@CoolDansta

4 ай бұрын

Causes issues if it's off when trying to voice chat while gaming

What about quad9 DNS

What do you mean by "separate radios"?

@futurecactus

Жыл бұрын

I think he's actually referring to the separate mesh nodes and their 'separate radios'

Can you do one using a Verizon router please

Shame Deco S4 can't split SSID for 2.4&5

Why does changing the router password make your wifi faster? You also mention for other channels click baiting about DNS setting and that is your first advice for faster wifi. So what is it now? I'm really curious about this. Could you please explain it to me? Thanks

@arnomijs3060

Жыл бұрын

Changing the router password does not make your wifi faster. It is however strongly advised for security, so it is great that he put it as a tip in this video because most people leave it default. The DNS setting being clickbait on other channels is sometimes true. Because some channels say that it will increase the raw speed of your connection. That is false. But by using a better DNS like CloudFlare, it can give you better latency for the DNS requests. And because of the better latency, it will feel like you are browsing faster. So the perceived speed is higher. In conclusion: changing your DNS, will make your browsing experience better if the DNS your provider offers isn't that great.

Guys Wpa3 is the new protocol as wpa2 is weak and disable wps on your router it has a vonrability

I have a bt router it won't let me seperate the channels

@scottjones7515

Жыл бұрын

bridge it.

@futurecactus

Жыл бұрын

I really think you're better off not separating them unless you have to. When they're together, your router steers your devices to the most advantageous band, once separated it can't do that anymore. The only problems I've heard of by combining the bands is done older devices having trouble connecting but they're fine once connected and there's ways of getting them connected.

@arnomijs3060

Жыл бұрын

@@futurecactus In my experience the band steering rarely works well because it is mostly up to the client itself to choose which band it will connect to. I've also noticed that they will remain sticky to the 2.4GHz band and refuse to go back to the 5GHz sometimes. In reality, the 5Ghz band will be the better option in 99% of the cases. So if range isn't an issue, you should always connect to the 5GHz signal. That's why seperated is better imo

@nosmas_r4456

Жыл бұрын

@@futurecactus Thank you

You right

🔁

The problem with Vodafone home fibre is that the have forced merged the bands with no way to separate them. Also not able to manually change the channels. My WiFi extender is now suffering with stability issues.

@arnomijs3060

Жыл бұрын

Wifi extenders are bad in general. Consider using hard wired access points and disabling your Vodafone wifi.

@davecullen86

Жыл бұрын

James I have Vodafone home fibre in the UK also. I opted for the Pro package to get the Wifi mesh etc. I binnned the lot, bought a Mikrotik hap ac2, and used my Unifi WiFi (2x Ac Pro and 1x U6-Lite). Generally on ethernet I get top line speed available via VF FIbre, on Wifi I get ~600mbps on the U6-Lite, and slightly less on the AC Pro APs. I love my setup ;-)

#1 tip - Use a Mikrotik router and not a TP-Link - YMMV however :-)

rooter to rooter

@averykristian

9 ай бұрын

if router sounds like router, I get that route sounds like route, but does "sound" sound like soond"?

Another common username password combo for routers is user user

@Californians_go_home

4 ай бұрын

In Australia it’s Rooter on you sir.

Actually, changing your dns can improve the speeds although not to any major degree unless the providers dns is garbage. If your internet providers dns is garbage then it can drastically improve speeds and make things more stable.

@arnomijs3060

Жыл бұрын

It won't increase your internet speed. But it can improve the latency for DNS requests, which in return makes your browsing experience feel smoother. But the raw speed of your connection stays the same

@davecullen86

Жыл бұрын

Basically what he said...

@arnomijs3060

Жыл бұрын

@@davecullen86 Not really. He wasn’t being specific. Not all “speed” is the same, as I clarified

if u want better WIFI change your mtu to 1400 or higher

"rooter"

@DaleDix

7 ай бұрын

That's how you say it in the English language. The Americans changed it to rowter because it sounds less rude.

t@

The title of this video is very misleading. Should be more like top five tips, very clickbait video.

Plz explain in Urdu and simple bro

Thank you