This channel is like an anime. He started off as the friendly guy who gets close to the protagonist and then turns out to be the villain. Then after being defeated by the protagonist he has a redemption arc and becomes a good guy.

@lonewolf8629

2 жыл бұрын

😂

@csolisr

2 жыл бұрын

I actually managed to miss his entire villain arc and was extremely shocked when I learned he started as a parody channel of all things

@reyynerp

2 жыл бұрын

but the difference is he is an actual, physical human. not a fictional one

@Dtr146

2 жыл бұрын

@@csolisr oh man some of them are still ripped out there. His most famous one was the "download ram" video. He didnt start the whole meme. but, made it famous.

@LydianMelody

2 жыл бұрын

@@reyynerp I didn’t know that. Thank you. 😂

I love how Joe's sponsors are often companies you've never heard about who offer genuinely unique and interesting services.

@cockomelons

2 жыл бұрын

basically shady companies jk jk

@natsudragneelthefiredragon

2 жыл бұрын

I wouldn't use this sponser

@tigergreg8

2 жыл бұрын

@@natsudragneelthefiredragon Why?

@natsudragneelthefiredragon

2 жыл бұрын

​@@tigergreg8 Well I had links to a reddit thread but it seems youtube and perhaps joe doesn't like that, You give them access entirely to your email messages, they scan your emails for key emails that seem to link to a company Then they have you send a message that would be the same if you did so manually, that literally just demands the company erase your data, The company has no proof YOU asked for this deletion, many people have said so, so they refuse to delete your data at the request of a third party, And if saymine (yes this is the full name) had a data breach..... Oh well there goes ALL of your data since you gave them access to ALL of your emails.

@BellCube

2 жыл бұрын

@@natsudragneelthefiredragon Never said I would (or wouldn't). But at least it isn't a VPN sponsorship, am I right?

Good video. As a networking (including WiFi) expert, I can say you addressed the essentials pretty effectively, in a way I think most people can use, whether or not they really grasp the underlying issues.

@carolynbeard6573

Жыл бұрын

My phone is the problem. Nothing èlse.

@wolphin732

Жыл бұрын

As a CWSP (Certified Wireless Security Professional) I have to agree.

@yooooooohth

3 ай бұрын

Any settings for better coverage?

@geoffstrickler

3 ай бұрын

@@yooooooohth The best general advice for better range/coverage is to put the Wi-Fi router/AP as centrally located to the desired coverage area as possible, or use multiple routers/APs. There aren’t many settings that affect range, it’s mostly about placement and frequency band. 1. Walls reduce range, particularly with the 5Ghz/6Ghz bands, the fewer walls/floors between your device(s) and the router/AP, the better. 2. Put the router/AP on the same floor where you plan to use your devices most, or one floor above them. The higher off the ground, the better the coverage is likely to be. Some basements might need their own router/ap. 3. 2.4Ghz bands have better range than 5/6Ghz bands, especially when the signal must pass through walls/floors 4. When using 5/6Ghz bands, channel selection may require lower transmit power for certain channels. These rules vary by country, so you’ll need to look up the specific restrictions for your country. Google “list of wlan channels” on Wikipedia, and read the footnotes applicable to your frequencies and country.

As a technician, I appreciate your advice and understand the value very quickly. I subscribed.

This is one of the most useful channels on entire KZread.

I remember you as a 11 year old kid watching your videos in 2015 and GTA 5 memories, the typical gamer of that 2015. Man that days were like good dreams. I miss them soo much.

I just discovered your channel today. Really love how you explain things!

Some clarification on channel width: on 11ac, the CTS (clear to send) is sent for the primary channel (the selected channel, such as 36 or 149), and then, if clear, also on the adjacent 40 MHz channel. If the other adjacent 40 MHz channel is also unused, then it also sends the CTS on those two also, giving you a total of 80 MHz of use. If any of them are used, then that packet is downsized to 40 or 20 MHz as appropriate. So really, the better thing to do is find the least-used channel, and set it to that. Leaving 80 MHz will only use the extra bandwidth when other users nearby aren't using it. 11ac was designed to play nice with its neighbors. The old advice of avoiding overlapping channels was taken from 2.4 GHz where the used bandwidth spans multiple selectable channels. This isn't the case in 5 GHz, so there's no worry of actual interference. Co-channel interference isn't a big issue unless the spectrum is very congested.

@FreeRadtWins

Жыл бұрын

Heh??? In English por favor?? j/k...I finally got it after 6 reads, lol. Seriously, all kidding aside, I am one day smarter than ever! Maybe 2 😉 Good juju man! Thank you kindly for your knowledge that you pass on so freely! 100% good juju!!!

@kwakuasiedu4935

9 ай бұрын

Sir, thank you for your explanation. I recently bought a sim router by name EDUP. Initially it worked fine with vpns with udp connection but now anytime I start any app with udp connection, the routers Internet stops flowing no matter the isp sim card I am using and the amount of data I have on them. I think something has gone wrong in the app but I cannot figure out. Any assistance to solve the issue will be appreciated.

This came out just on time! I got my new router yesterday

@thiojoe Thanks very much for the very informative video. As always, I really appreciate all of your time, effort and money that you put into these videos. They’re very helpful, intuitive, and knowledgeable . My rating is ⭐️⭐️⭐️⭐️⭐️. Thanks again - Keith

Food & water will be a great thing to stock up on while shortages are going on worldwide. I kind of want to keep seeing ThioJoe creating more & more legit technical videos. He's like a great teacher to his viewers & i wouldn't want to see him go away ever. Love your videos. ❤

I believe I discovered your channel in 2015 but started watching more and more videos in Nov 2018-Jan 2019. Today, I'm going to become a cybersecurity analyst. Always have some easter eggs in your videos! Thanks for introducing me to networking!

@1hawtMetz

Жыл бұрын

Congratulations!! I am still fighting off the same reservations with beginning my own Cybersecurity and Networking certifications and education programs....again...and this is weirdly "a sign" to me that I just finallyy take the acceptance letter as a win and enroll myself already! I am stoked to read your account and that really blows my mind how far back your inspiration and the connection goes here in your life and your own experience so far in the field. This is my first vid/view of his channel in contrast. Anyways!! Thanks for sharing this and the motivation you gave mee by proxy ha sorry for the long winded comment/reply but I wish you all the best and for whatever it's worth: THANKS!! Good vibes and success in your endeavors. -C

2:41 - You can find the IP address of your router by typing "ipconfig" into a cmd window and search for a “gateway”. There should usually be only one gateway, and this gateway is almost certainly the IP address of your router.

DFS channels can be used without problems (generally) if you have zero-wait DFS enabled. It just switches channels upon detecting radar and used one spatial stream to detect for radar presence for X amount of time (which can vary based on brand, firmware or even type of access point).

@wolphin732

Жыл бұрын

It will also bring down from 160 MHz bonding to 80 or even 40 if it needs to. Also, due to the power levels, unless you are near a radar station, it is unlikely to ever affect you.

Thanks for going into so much detail. The Google and Cloudflare DNS context was SUPER valuable and helped a lot.

Thanks for the tips. Just speaking for myself I also use MAC filtering to restrict the devices that may attach my personal network.

For a while there, devices without keyboards and screens always wanted you to press the WPS button to get set up. I haven't run into that in years, and I think that temporary WiFi channel many devices use during setup from an app on your phone are in lieu of using the WPS button.

@ThioJoe Thanks for this video as I have been having issues with my Oppo mobile phone 5GHz Wi-Fi speeds being very slow (getting ~60Mbps). After looking at the frequency band chart you provided in this video, I noticed I was using Channel 116 (Doppler radar band). I did a quick check on the Wi-Fi analyzer and found Channel 100 was not being used. Once I set it to Channel 100@80MHz, I did another speed check and the download jumped from 65Mbps to 420Mbps. So thank you again, as I was about to send my phone off to the manufacturer for investigation.

@bladd7707

Жыл бұрын

Doppler radar is not the reason you were seeing reduced throughput. If there were actual doppler radar RF energy in the area, your AP radio would detect this and by law, cease operation on the channel for a period of time. The overwhelming majority of devices will not receive energy from ground based radar systems. As a general rule, for 5 GHz use 20 MHz in high density deployments and 40 MHz "when you can", i.e. lower density deployments and building structures with enough attentuation between APs to keep co-channel interference to a minimum. 80 MHz should not be used unless one lives in a rural location with only a couple of access points deployed. Often overlooked is the fact every doubling of channel width, also doubles the noise floor.

Please do make more like this. Thank you Thio

My AX6000 does 160 and I love it for wireless VR. It sits on my desk 2 meters away from my headset so it's amazing

Glad to see Mine is sponsoring you! I've been using Mine since MrWhoseTheBoss's video but still working on sending data erasure requests

Thank you ThioJoe!! I changed my config from 20 to 40mhz. I did a speedtest before and after and the results were: Before - Ping / 20ms / Down speed 15Mbps || After : Ping 11ms / Down speed 98 Mbps !!!!!!! Thank you !!!!! :) :) :)

About WPS, there are some printers and other devices without a keyboard that uses WPS (most can be configured by connecting via USB to a computer, but it's usually a pain), but since WPS is used ONLY on the FIRST connection, you can activate the WPS, connect your device, then disable WPS. This way, WPS is only active WHEN you need, not IF you need. It is a little less convenient, but much safer.

@1hawtMetz

Жыл бұрын

Ahh thank you so much for this!! I've had the WORST time I never expected to have when I switched ISPs and tried to use my trusty printer with hours of toiling and troubleshooting and it's just...embarassing ha. I am still working on it but this is truly helpful tonight thank youu and good vibes. Here we go againnn ha :) have a great one

WPS is good to have for some older printers which you can't connect to directly through an ethernet cable. I've used it to help my parents-in-law with their printers.

Just had my family's internet set up yesterday and this is probably useful

Outstanding info - Thanks, Joe!

GREAT video! And thank you very much for using a Netgear router.... It made finding things in my menu, SO much easier.

Splitting the bands to allow you to manually choose which band, 2.4GHz or 5GHz, to connect to is another good setting to change.

Great video for new people in netowrking and security!

U got a new fanboy ur AWSOME brother thank u for ur work and passion I’m very impressed truly

Helpful! Thanks for the time stamps for us nerds :)

One of the best channels in this field, detailed explanation + simply understanding the information. But I have a question and I hope you answer me because I really need it, can I block a specific app from the router?

This was very informative. Thanks!

11:58 Yes, I use WPS. It often makes it much easier to restore lost or interrupted connections. It's only insecure if one lets it be. Setting 7: Not really a setting but something to do, and that is to make sure that when setting the new admin credentials, THAT YOU DON'T FORGET THEM LATER. Been there, and DAMN DOES IT SUCK.

@BunnyBugs009

2 жыл бұрын

I better use QR code upon WPS

Oh, a bonus tip, from someone who works for an ISP: A lot of newer routers will have a single SSID for 2.4 GHz and 5 GHz wifi, with the router determining which frequency each device connects over. For some IoT devices that have to be synced through an app, you have to be on 2.4 GHz to do so. Some printers can also only connect over 2.4 GHz wifi as well. Some routers like this do let you split the wifi networks, but not all of them... including the ones provided by the company I work for 🙃 If you have such a router, the semi-official workaround that's been passed around the office is just getting further away from the router, but that's not feasible for most IoT devices, so here's another one I found in my spare time: Unplug your router, then set up a Windows or Android device to act as a wifi hotspot (it might be possible to do this on a Mac or iPhone, but idk if those give you the requisite degree of control over settings. There's probably a way to do this on Linux as well). Set the SSID and password to match the one you use for your wifi network. Make sure that the device you're using as a hotspot is broadcasting as 2.4 GHz. Then connect to the hotspot and pair the IoT device. also for the ISP I work for, our two most recent models of router don't even support WPS. The older of the two does have a WPS button, but it literally does nothing. It's a vestigial leftover from the model before that one, which did support WPS. afaik the hardware was re-used between the third-most and second-most recent models - it's just that the second-most recent one uses a different operating system.

@hayjud4062

2 жыл бұрын

I've had problems with Alexa and Kasa devices that do not want to work, so I ended up having to switch to 2.4 GHz. I am not too savvy with all these techie stuff and I have always trust KZread for help. Thanks for your info!!!

@TurboSpeedWiFi

Жыл бұрын

Who uses WPS anymore? WPS has been a bad practice to have enabled for 5+ years now. WPS is arguably the weakest point in the WPA 2 security protocol.

@ScribeAwoken

Жыл бұрын

@@TurboSpeedWiFi in my experience? literally every customer I've spoken to who actually used WPS (all three of them) was trying to connect a wifi repeater and didn't want to bother with alternative methods

@TurboSpeedWiFi

Жыл бұрын

@@ScribeAwoken I suppose that is a way to do it. Personally I do not use nor recommend repeaters. Generally they do more harm than good.

@ScribeAwoken

Жыл бұрын

​@@TurboSpeedWiFi ​oh yeah, I know, but for whatever reason some customers are just dead set on using our router with a shitty $30 repeater instead of setting up some wireless access points around their house, or just turning in our router, getting a mesh system, and saving $5/mo on their monthly bill.

Wow... Thank you so much for sharing your time, effort, knowledge and everything in between that serves for you to make your videos. I've already watched three trying to get some advanced tips on how to set up my new Asus RT-AX55 router... What a challenge :-( I guess am getting to old for this, not to mention my vision problems. Thanks again and you have got another grateful and satisfied subscriber here. Blessings from the Universe!

Thank you, I learned a lot. I have been trying to add an HP printer to my wifi network without success. Maybe changing the WPS setting will help.

that upnp one was a life saver thank you

Great video I finally understand channel bonding

This is one of the most adviceable and usefull channel entire on KZread

Great video. I learned a lot. Will looking at more of your videos.

WPS isn't used a lot in my life, but it comes in real handy for printers! Canon's app drove me crazy so I just went with WPS and called it a day!

Some routers ports are diff speeds, make sure you have what you need connected to the right Ethernet port jack.

I was about to go to bed and watch some Dr. Pimple Popper videos (my lullaby 😅) when this video is one of the selection to watch, I don't usually skip Dr. Sandra but your aura is like a magnet 🤣 I ended up watching the entire video without getting bored although my eyes want to shut down 🤣 Thanks for these informations, really appreciate your effort of specifically explaining everything ❤️

@goofballbiscuits3647

Жыл бұрын

Lol big same. Dr. Sandra is the best until I get a little too grossed out. Otherwise, I'm falling asleep learning tech of all flavors 😴

Over a year back I bought a wifi 6 router to upgrade from the default google fiber router, but an upstairs roommate said it was a lot worse than the google one. After upgrading mobo/cpu I had to change to an nvme wifi card(old one was too close to GPU) and have my good pcie one left. I'm tempted to give/loan my old card to him and try using the new router again. Not sure though. Spent a bit over 100 on in so would be nice to use it. The default fiber one is good enough though. "New" one is the TP link AX 4400. Worked the same or slightly better for me, but that roommate did have issues.

I thought your barber had missed a hair until I looked closer on my mobile. Missed this channel!

I've used the WPS button at home, as well as when staying at hotels/motels/airbnb, when the Wi-Fi log-in isn't made readily available to guests. Its a great feature when you need it. You cant use it on an iphone though, but no one in their right mind would have one of those...

Here's a login tip for Telstra routers since i've had to work on a few lately. (Mostly apply's to the Gen3). The password will be the default WiFi password that was on the fridge magnet that came in your box.

Thanks for this applicable video😊

Hi thanks for your tips i really need that for my router settings thx😍😍😍.

Also remember that the 2.4 ghz band is the exact same as what microwaves use. If you only have a 2.4 ghz Wi-Fi, you can not easily use a microwave at the same time. Microwaves have no care and just blast the micro waves to cook your food. 5ghz avoids that completely

@ThioJoe

2 жыл бұрын

Yep

@Wingedshadowwolf

2 жыл бұрын

Good thing they are shielded.

@user-lt2rw5nr9s

2 жыл бұрын

My parents had a 2.4ghz landline in the same room as the router. If it was on the wrong channel it would get knocked out every time we got a call.

@volodumurkalunyak4651

Жыл бұрын

I can. My microwave oven (Samsung PG838R) is new and shielded very well. 2.4Ghz WIFI and bluethooth doesnt drop even when device is close to working microwave oven.

@ahmed4363

Жыл бұрын

imagine having a microwave lmao

I have had two sets of mesh routers (D-Link and Google). The settings for them are few and far between. You, pretty much, get what they give you.

Thanks man!! It was helpful 😃Thanks a lot

Joe didn't say this but this is what i've been using for years. If you open cmd and type ipconfig you can see default gateway of all routers your connected to, so you know the exact IP to type in.

10yrs ago I used the WPS feature quite a bit while I was adding WiFi cameras to my network. However, as mentioned this a MAJOR security risk to your router nowadays due to SO many hackers out there - definitely DISABLE this! Back in the day MANY WiFi cameras required "Port Forwarding" to be able to view the feeds while not at home (off network). Most cameras today this is not needed and also as mentioned should be turned off! Also, not mentioned is your "password" should be 12 characters or longer! The reason being is 8 character passwords can be easily "cracked" with simple "bot" programs and in some cases within minutes! When you get into 12 or more the combinations become MUCH more making it harder to "crack"! A "hacker" will most likely move on to easier "prey" to "crack". For example my most sensitive connections use 14 characters or more using letters and special characters and upper and lower case letters. It does not take much to do 20-30min of research on Google to "protect" yourself and your devices!

@RickMyBalls

2 жыл бұрын

Yeah you just need one vpn for your cams.

@johnszatkowski6898

2 жыл бұрын

@@RickMyBalls ; Correct! I use a VPN running directly on my router so it encrypts ALL devices connected to it!

@volodumurkalunyak4651

Жыл бұрын

WPS BUTTON is fine (secure). WPS PIN is only part of WPS to be disabled for security.

@johnszatkowski6898

Жыл бұрын

@@volodumurkalunyak4651 ; I disagree! From all the articles I have read (MANY) WPS is a big security risk unless you are using a VPN. I hacker can gain easy access through the WPS feature parked outside your home/apartment and have access to your network. IMO you better do some more homework. You would be surprised how many people have their routers setup for EASY hacking. Login and passwords are also bad if using 8 characters or less! Most BOT programs can hack 8 character passwords in less than 2min! For a MORE secure router setup CHANGE the login name from ADMIN and use a 12 or more character password! Much harder/longer to hack and most hackers will move to easier prey! I cheap router sounds nice on the wallet but they offer NO firewall or DOS attacks or other security features! You DON'T need to spend $500 on a "good" router but a $200 range router will offer MUCH protection. Crooks are ALWAYS thinking and will do what they have to to hack your information! One last note - DISABLE Guest logins from your router - another HUGE risk!

WPS I use for IoT devices like Garage openers also a Sense electrical sensor

Amazing video! I wonder if you have tips on how to set a large house network with multiple access point connection by Ethernet to the main routeur provider! I have set up 3 AP in all the flats and want to set them up as one SSID in my house so they can switch between them automatically as I move around the house! Thank you

Changed DNS to as you advised, and disabled UPnp. Thank you! It feels like magic

have a 500 mbps connection, bought a new netgear router/modem and ethernet provided great speeds, but wifi went down to 30-50 mbps. Changed the channels off auto, did some of the other steps, and now I'm getting 300-350 mbps - THANK YOU!

Great video - many thanks.

Thanks a lot for this video.

I remember that on a Xiaomi MiBox with Android 7 or older, you could actually connect the device to the WiFi network using the WPS function of the router. I remember I did it a couple of years ago, it worked and it was much faster than manually enter the password. Anyway, great content as always. 👏👏👏

@bluecraney1

2 жыл бұрын

also wifi printers use it alot

@SeriesTube01

2 жыл бұрын

@@bluecraney1 Still Thio says he doesn't know anybody or any device that uses that function. 🤷‍♂

Thanks TJ!

My router is set to automatically select the channel width (and i noticed it has an option to enable or disable the 160mhz width, which is currently set to disabled) (And for most of the other things, i had already turned them off, as although they are on by default (except for remote management), my router gives advice on what i might want to turn off) Some WiFi enabled printers where i live require use of WPS to set them up, although newer printers tend to get you to connect wirelessly to the printer and pass the WiFi credentials across to the printer that way

I tried that website and it's great! I reclaimed a few. Thanks.

Great video! Do you have another one explaining the 802.11 wifi mode technologies [a/b/g/n/ac...]? I would like to know which one is the most suitable.

Not sure how the menu settings on the left changed but was finally able to change my DNS settings. Thanks

thanks for vid after turning off Upnp setting it seemed to fix problem i had where i had decent speeds and ping in speed test but i would have lag spikes where things would freeze then everything happend at once.

Some good basics 🙂 Advanced: Using CloudFlare's Malware DNS + DNS-over-TLS on pfSense with pfBlockerNG and SNORT. Don't forget subnets, VLAN tagging above 0 and DHCP reservations. Changing the default user and/or removing admin could also be recommended though security through obscurity doesn't work too well if at all. Ensure WPA2 (CCMP/AES) and not multimode. Or WPA3 if possible. Guest WiFi can also be another consideration for things like IoT or something like mDNS and Avahi.

@west9383

2 жыл бұрын

nerd

@Lighthouse_out_of_order

2 жыл бұрын

I had slow response/no response issues with CloudFlares DNS

@bongripsdaily581

2 жыл бұрын

yes when i connected 2 routers together i had to disable the second routers vlan

@cammy85

2 жыл бұрын

Thanks as well!! :) For compatibility, I have WPA2-WPA3-Personal. It's through the cable company, so I have most the settings ThioJoe mentioned and have tweaked where I could. I can't change the router channel anymore.

@osfbro

2 жыл бұрын

This made my day

if you have 1 router on your local area network, you can also check the default gateway by running ipconfig /all in command prompt to access router settings this may not work if you’re on a subnetwork or you’ve connected through a LAN bridge

@StephenMcGregor1986

2 жыл бұрын

arp scanning may work through subnets/bridges as it works on layer 2

Great explanation, thx...

Should I switch on ofdma on my tp link ax5400? I have 4 iPhones on a switcher app on my iPad mini m1 going through the AX73 into a m6 netgear.

Outstanding - thank you

I recommend that this is best channel for setup of your router

this is the first time ive used a sponsor, wow mine is actually useful

@natsudragneelthefiredragon

2 жыл бұрын

I would be careful about them

I need to learn this by heart

This was great! 😊

Great video for beginners, you should mention quad 9 DNS which vows for privacy protection

Love your videos

Great content thank you

What are your thoughts on MAC filtering? Is it worth it?

Oh, one thing about WPS. I have a Japanese printer/scanner that required me to set up router access using the WPS button. Though of course, I disabled it as soon as it was connected.

Hi. The Upns disabled wouldn’t that effect smart home devices that is Alexa or eWeLink. Thanks for the heads up. 🙏

This video gets a big thumbs up from me 😁 I didn't know that my xFi router had a default password, but I made sure to change it because it was easily guessable

@darwisyaiman1865

2 жыл бұрын

Is that Admin username without password? 😂

@snarkykat

2 жыл бұрын

@@darwisyaiman1865 I'm not saying because there are a lot of xFi routers out there and the people who have them should all watch this video

@ryler7

2 жыл бұрын

@@snarkykat Does this mean your your previous password was "previous password"?

@darwisyaiman1865

2 жыл бұрын

@@snarkykat yes right hope they change their admin password right after watching

If you have a lot of smart home devices connected to your house, along with computers used for business, banking, etc, it might be a smart move to add an old router to your main router to just use to connect your smart home devices, there are a million diff smart home devices you can buy & connect, made by a million diff companies. Most smart home devices only need is able to connect to the internet, so make sure the older router you're using only had internet access to your homes network, no reason a smart home device, or anything connected to the old router should be able to reach the PC you do your banking on. If someone is able to hack your smart device, it would have your wifi password stored on it, might as well make sure it isn't handing your banking data over to a stranger. Yes make sure your old & new routers do not have the same wifi password.

I have followed this channel when Theo Joe was showing us how to speed up our network,by taping double a batteries to the network cable (measuring I believe it was 6 inch’s back from the end of the cable,with the positive ends both facing out ) it worked on my Hughes net I was shocked .go get em THEO JOE.✌️

Wps is good for printer setups but change it from button to pin so your press wps a code will show on the printer and you can type that into the portal to allow it through

that thing about the channels is interesting, I occasionally have my 5ghz network drop for a time, especially at my parents home. I wonder if it has to do with the weather bands... something to look at

I use WPS quite often. But then when I do, I enable it in the router - then use it - then disable it again. It is nice to connect quickly since my router password is **** charactes long!

Great video thanks 😊😊

If you want to know your routers ip you can just type ipconfig in cmd and run that. Once that has run look for the line that says default gateway, then look at the ip asighned to that and that should be your router ip

Finally, Another MINE SPONSOR

After changing the router's DNS settings to Cloudfare, is there any point in also accessing the control panel to change the network connections settings properties to Cloudfare as well?

Understandable, have a nice day.

Hey, I didn't know those cloudflare DNS ips, so even I learned something today.

I narrowed down the channels on the wifi, also reduce the range & bandwidth %, smartphones don't need alot data to run apps. My brother's & my Xbox is where the priority traffic goes to, port-foward, disable UPnP etc so when you jump on the phone to check something, it doesn't create a lag spike or packet loss if one of us is on.

WPS is useful for quick setup of embedded devices - say, a printer, or some sensor. Basically, anything without an input method. But yeah, it's not too secure.

Can you make any adjustments on your Cable company router or settings to make it more secure? Mine is Spectrum (Charter Communications)🤷🏾‍♂️.

Thanks Joe...How do I add new DNS addresses ipv4 in static i guess that would be the place to do it- for better protection, security and speed and not rely on my ISP settings if this is possible? TKS..

Good work❤