The foam is an insulator so the epoxy cant dissapate the heat

@hizzeist

Жыл бұрын

That was my exact thought too

@BMSculptures

Жыл бұрын

Very good thinking guys.... I think you are onto something!

@mkdrivingzone

Жыл бұрын

I was thinking the same. Plus the insulation from the fridge. Maybe heat is building up too much and needs venting regularly?

@JosephsDesign

Жыл бұрын

Yeah, that’s about it, you want less insulation not more, maybe thinner paneling would be good or using some thermal conducting paint on your mould. A fan would also be good to get some airflow and convection cooling.

@hayestweed7143

Жыл бұрын

Possible the foam is still off gassing too.

I honestly felt so sorry that this project caused so much problems. The end result is beautiful as always though, well done!

@BMSculptures

Жыл бұрын

Thank you! 😊

@simsblood1611

Жыл бұрын

Woww that is absolutely beautiful!!!

I've never seen this channel before but showing the real frustrations that happen when you're making stuff is so relatable. Makes me feel less alone lol.

@SteveShivik

Жыл бұрын

I also end up feeling less idiotic haha- like man, this guy who makes these wonderful things ALSO makes mistakes he feels are basic etc.

@stacybowers6695

10 ай бұрын

​@@SteveShivik🎉😢mkkii😊😊😊😊😮😢😢😅😅😮😮😢😢😂

@zjedinite

10 ай бұрын

This goes to show you that the sucky reality of life is way more relatable then the fake ass beautiful life’s of social media “influencers”

@musicarelax7720

9 ай бұрын

​@@stacybowers6695wtf

@failoverflow4888

13 күн бұрын

Looks like fire wood

I'm not against of that kind of channels that don't show everyone the problems that sometimes you have to deal with and they show you only the good looking things. That's why I follow this guy, you show all the process, doesn't matter if is going well or not and that's the real value of your sculptures and your work in general.

Regarding the blade breaking, the piece was wedge shaped both horizontally and vertically, allowing a tooth to hook on the top edge and jam. The front edge was also up off the table a little, allowing it to rock into the blade, causing a camming action that helped stop the blade. A small movement as you unlocked the fence may have been the trigger, but the setup was the powder-keg. Pretty amazing to see the blade above the work piece warp as it was stopped, but the momentum of the rest of the blade kept pushing from behind. It happens sometimes that the blade snaps in a different place on the blade and the broken end stabs down into the top of the table, so keeping your hands away from the sides of the blade can save you a trip to the ER! Beautiful work, as always. Thanks for sharing.

@kellykwon2232

Жыл бұрын

It's probably his doppelganger or twin thinking he can do anything the actual sculpture can and not understanding the deeper mechanics of the saw.

I'm a creator myself, so I completely understand the whole "but it's handmade/handcarved" concept. People don't want to pay for what we create. You put SO SO much into what you create and I can appreciate the price tag, unlike several videos I see. Keep up the great work ❤️❤️.... btw, no teeth. It's howling at the moon.

@BMSculptures

Жыл бұрын

thank you!!!

@shadowsilverlight1651

Жыл бұрын

thats because only You see the value you place. why do you think there is the saying...."starving artist"? hate to break it to you but people arent gonna pay you for what You think you are worth. i learned that the hard way.

@Aregrowngoddess

Жыл бұрын

Idaf bout none of that. You brought a design? 😂😂

@jrich436

Жыл бұрын

@@shadowsilverlight1651 because one can not dictate to the many how much their time is worth. You can ask whatever you want, but the market is going to decide. Just because A fool wants to depart with their money that STILL does not mean there is a worth Something is worth what people will consistently pay, until they won't anymore

@fredmercury1314

Жыл бұрын

Almost exclusively, people don't have huge bundles of cash to pay you to do what you want to do. The average Joe is not dropping $20k on a plastic wolf. They have a mortgage to pay and kids to feed. That's why artists used to live in abject poverty, until they found a patron; one single rich guy who liked what they did and wanted to support them. Pretty much every great artist survived by finding a patron. Or they died penniless, with their work only gaining noteriety long after their death.

Beautiful work.I imagine all those sculpturers back in ancient times who had no power tools yet created amazing stone carvings and how difficult and frustration that must have been.

As an artist who has also worked a lot with wood and epoxy/resins, I’ve always embraced the “mistakes” and the unexpected results- to the point where I began deliberately creating the environment for the materials to get weird. Maybe that’s just me, but making art is also supposed to be fun. It’s hard to feel like you can’t “waste” expensive supplies/materials…it’s the curse of the actual starving artist. But maybe, just occasionally…let it get weird!

I like he omission of teeth. Keeps the wolf looking like he’s saying “Woooooo” rather than “AAAAAAA!” Beautiful work as always! The dedication and perseverance in the face of all the setbacks is incredible! Keep it up!

@Clodaghbob

Жыл бұрын

Agreed. He looks as if he’s in the middle of a long satisfying yowl.

I had a wolf as a companion for 14 years (and yes he was a house wolf) and when he howled you didn’t see a lot of teeth. This wolf of yours is obviously howling so the fact you can’t see teeth is quite accurate. I absolutely love this particular sculpture. It’s beautiful. One little caveat that I feel I must add. While people might think it’s really cool or neat, I don’t advocate having a wild animal as a pet. I wound up with him as a cub through a convoluted series of events that ended with me either having to keep him or put him down. Obviously I chose to keep him but he remained a wild animal by nature and his hunting drive was quite pronounced. Having a wild animal, no matter how docile they may appear, requires a great deal of care and vigilance especially around other animals and those people who are not in his immediate “pack”. Despite that he was a beloved member of our family for 14 years and we all adored him especially the kids.

@BMSculptures

Жыл бұрын

wow. a real wolf as a pet!??? amazing

@chandarussell

Жыл бұрын

@@BMSculptures yes. He had the very unoriginal name of Lobo. Your sculpture reminded me a lot of him. Although he died nearly 15 years ago I still miss him.

@williamkeaton1340

Жыл бұрын

Much as your lips are required to create a sound when singing /humming , speaking the sound created by Wolves/dogs is shaped by the placement of the lips effectually hiding most if not all of the teeth . Sounds like a reasonable supposition anyway !!!

@pseudocoder78

Жыл бұрын

@@williamkeaton1340 That's very true, after all, everyone knows wolves say "Awooooo" not "Ayeeeee"! Good observation.

Thanks for not editing-out the explosion accident. I learned something new, today. And I thank God you have more days to share with family.

People who show failures help other artists so much

It’s absolute joy watching an artist at work. I’d love to have just sat off to the side to watch this masterpiece unfold. ❤

@BMSculptures

Жыл бұрын

Thank you so much!

I'm not an expert but what I've seen before is sometimes the epoxy manufacturer changes the chemical makeup of the epoxy which leads to different results than previously expected. Check with them to see if they made changes to the mixture. Blackforest I think experienced something like this and ended up creating their own mix.

@BMSculptures

Жыл бұрын

Very interesting. I will reach out!

@Flameableflare

Жыл бұрын

@@BMSculptures It may also be the surface area of the pour, or the material your box is made of, if the area the heat can disperse is too small up top (meant as in if the top area is small, and hardens first), or if your box material may be too insulating (like the foam layer), the heat wont be transfered out of the epoxy, even in the cool air of the fridge. I don't know the properties of your materials, but that is my theory. TLDR: Your pour container may be too well insulated, so even though the fridge is cold, it's only the exposed epoxy in the top that actually gets cooled, the rest in the box just cooks itself. Hope it makes sense! Edit: I see you took the temperature precautions for the next pour!

@ricksehfeld3092

Жыл бұрын

@@Flameableflare i think you are right with the pour being isolated, like in a sleeping bag with only the head sticking out. i think using a more heat conductive material will dou you good. like only plastic should do, (any metal would do better, but money)because on the wood with plastic on both sides you have a good isolator. edit. you could use a temperatur gauge on the inside walls of the box you pour into to check that

@zakkaryzoah1386

Жыл бұрын

@@BMSculptures I came on here to tell you @BlackForestWoodCo are the experts in epoxy. They’re also Canadians, so you know they’re good people. Thanks for posting another excellent video.

@sethbybee2573

Жыл бұрын

I also think it’s surface area. Looked like the top of your pour was cracked and yellow while the bottom was clearer. It was a quick clip so maybe I didn’t see it right. But that would make sense since the lower portion would have had more surface area before you poured the next layers, each with less surface area for heat to dissipate. Smaller pours should solve this….just painful in time cost. Anyway, love your stuff!

That buckeye wood is GORGEOUS 😮❤

Incredible work! So unique. Love how you feature the beauty of each wood.

You insulated the mold with the expanding foam. I’ve told you before that melamine traps heat as well. use HDPE, it’s more expensive than melamine but cheaper then losing the whole project, it’ll act as a heat sink on all sides to let heat evenly disperse through the walls! You also need to vent that closed freezer to to allow it to offgas. You also don’t brace the mold sides from the outside and all that heat expansion stresses your mold and finds the weakest point which is why it leaks.

@BMSculptures

Жыл бұрын

Great tips and tricks!

@pinkerbot

Жыл бұрын

How do you join the hdpe sheets? I don't know any glue that will hold, but i would love to find out what to use 🙂

@WiiNESticles

Жыл бұрын

@@pinkerbot I use dominoes to hold them in place together and then rubber bands or straps around the outside of my molds to ensure they don't move. But I still caulk my interior and exterior joints as well. I only use it for small scale molds I have made for myself for my own purposes. You could definitely drill holes for screws though too, if you need to reuse it with a hole somewhere else, just fill the hole with caulk. I'm telling you though, mdf will insulate. Don't use it for big pours, it'll overheat. that HDPE will absorb heat and cold, it'll help the temperature of the epoxy. I guarantee his pours get more clear with HDPE because they won't cloud, they will cure slowly.

@pinkerbot

Жыл бұрын

@@WiiNESticles thanks!

@Felice_Enellen

Жыл бұрын

Yeah I was looking for someone who'd mention the fact that the offgassing will be impaired because the chest is sealed. I mean, the fact that it exploded makes it clear that the atmosphere inside had a very high offgas content, which means there's less reason for the gases in the resin to move out of the resin. Remember how osmosis works: flow is always from areas of high concentration to low.

The foam heats up considerably as it off gases. Though it might also have to do with the off gassing being trapped in there too. I'd spray the foam and let it sit for a day before putting in the freezer and doing your pour.

My art studio is "Stone Wolf Creations" so seeing your Wolf was what drew me to your channel, he is stunning! I did a Soap Stone Wolf a few Decades ago, long before the Internet and Cell Phones, I think he was in the late 80's. I remember the first time the battery operated Dremel came out and we started using power tools and more than just hand held rasps and saws on Stone and Wood sculptures. So long ago!

Absolutely brilliant and the mouth is just right. Your disappointment but perseverance was amazing. Well done to you. This is the first of your videos I have seen. I look forward to seeing more.

Even with the rough start, this turned out beautifully. I watched a couple videos, of howling wolves, and if any teeth show, it is the front bottom ones. I think how you did it was just fine. Glad you are ok. Continue to stay safe and thanks for sharing your talent with us.

Blake - I am beyond happy! My wife just surprised me with one of your cutting boards, actually the first one that you placed on your table. It is a beautiful piece of usable art and it is amazing. The certificate and documentation is personal and professional. Thank you!

@bearthomas

Жыл бұрын

Why post this here? WHY not send them an email or give him a call? 😮😮😮🤔

Playing the add on the side instead of taking the entire screen is brilliant

I have seen this video several times and the part where your reenacting the explosion, right before the explosion I got TOTALMENTE! From that one ad 😂

Man, totally feel you! Dealing with epoxy can be soul destroying. Impressed by your perseverance

@jessewru6425

Жыл бұрын

And cancer causing if you don’t prevent that, right? Aren’t the fumes damaging to the Sillia in your lungs? 🙆‍♀️🤷‍♀️💃

@jwalster9412

10 ай бұрын

​@@jessewru6425not if properly ventilated.

Great video! This is just a total guess, but maybe off-gassing from spray foam that was trapped in the fridge spoiled the hardening process of the epoxy (by chemical interaction or increased pressure). Opening the fridge door at different intervals for different projects may have caused some pours to be successful (door open more often) versus unsuccessful (door open less often). Good luck solving this issue. It's a shame when all that hard work goes to waste.

@BMSculptures

Жыл бұрын

That is a good theory! I will not be using the spray foam method anymore lol. Thanks for watching!

@jimbo8617

Жыл бұрын

Maybe the yellow color of yellow spray foam leached into epoxy?Air movement when opening/closing freezer door moving color around during cure?Great vids also TY.

OMG! So glad you're ok but that must have been a wakeup call. Wow crazy! The reenactment was hilarious, especially when you switched to a different angle. Lol 😂 Back to the pour, its an exothermic reaction. Usually, the bigger batches are prone to exothern. Even though you have it in the freezer, you need it cold like -24°F or combining a standard freezer with a really good heat sink contacting the resin. Aluminum mold would be the most inexpensive route. Just ensure applying mold release before pouring. Hope this helps. Great looking sculpture!! Your work is one of a kind! 💚💯💚

Love how you do your commercial in the middle - so many channels stop what they’re doing and do their commercial. I fast forward through those. You continued to show the production of your boards so I just kept watching.

I'm not a person who understands "art" at all. But these sculptures of yours, I really love. I hope that I'll make enough money the next couple of years so that I'll be able to get a sculpture of yours to have for my home. Let me hope that you'll still be doing these by the time I can afford them xD

@BMSculptures

Жыл бұрын

Thank you so much!

@suzyhendrix

Жыл бұрын

Sounds like you understand art just fine!

I can't get enough of your sculptures, another masterpiece!

Thank you for sharing every step especially the problems you encountered with this sculpture. The Wolf is absolutely beautiful. I learned a lot. 🤟

It turned out great! It’s impressive how you handled it. I’m always blown away with your work so don’t let this stop you! I’m just getting Blacktail studio flashbacks 😂

@garyhost354

Жыл бұрын

Black tail is awful. Same stuff every video. Hack

Brilliant artwork and effort! Keep up the good work. I have a couple of small suggestions: Some gasses can be heavier than air, so maybe the the flammable gas would have perhaps have stayed in there even with door open? The kick-back and snapping of the blade is because when the blade bit in to the wood, it was not held securely and above the level of the bandsaw table at the point of contact. It has happened to me also.

wow, he's getting advanced almost like a firm with a PR arm. "which basically doubled my time as my previous method" "before long I had my layers all ready to rock and it was time to glue them up" LOL the power of positive thinking and video lines

I’m sure you can reuse the murky epoxy! Maybe you could use it to sculpt little frogs! They live in swamps after all, I don’t think they would mind being a little murky! ;)

I don't remember if you have one in your deep freeze but maybe adding a fan inside will help even out the cooling. The freezer might be the correct temperature but since there is no air flow, the pour probably stays too hot

@BMSculptures

Жыл бұрын

I have a fan inside!

I don’t understand how you don’t have at least 1 mio subscribers yet?! I love this channel man. Your videos are super interesting & entertaining and your sculptures are just freaking cool. The amount of work that goes into them, crazy! 🙌🏼

@jamesbizs

Жыл бұрын

I’m sure he has a least one mio. It’s a weird name, but KZread is worldwide

I dont even gotta watch this video until i have more time having seen the level of detail that goes into this dudes work , i already know it turns out badass..

What a lovely piece of art. I am so happy that you escaped with only some singed facial hair and not the loss of your sight. You certainly had a guardian angel watching over you that day. Have a great weekend and keep safe. 😊🇨🇦

The off gas from the spray foam could be reacting with the epoxy to cause the overheating.

@BMSculptures

Жыл бұрын

Interesting...

Came out amazing as per usual. Always in awe of your talents. Maybe you've solved your issue by now, certainly the foam acting as an insulator is likely a factor. The other thing is that, at least with the 2 part PU foams I use for surfboard repairs, they give off quite a bit of heat during expansion and curing. That's probably not helping things either. I don't use cast resins but surfboard epoxies but I think if I was attempting something like this, I'd be doing smaller pours just for safeties sake. Maybe cut your pour volumes in half?

I gotta admit, it’s nice that you included the problems and mistakes. 99% of the other videos only show the good stuff

This is the second video of yours I'm watching and now I understand a bit more of what you do. Absolutely love wood in all shapes and sizes but to see how you turn those leftovers in beautiful cutting boards is truly humbling and I'm glad to see such a precious resource has not been waisted. I also liked how you left the scares and mistakes in there and had a bit of fun with them showing your serious and humorous side which made the video better because it showed your vulnerability. So now I'm at minute 14 and I'll finish watching ❤

Epoxy fascinates me and stresses me so much at the same time😂 this has been so awesome to watch but with so much anxiety ❤

You are a true artist, your sculpture is truly beautiful and could hardly be done better than it is. I am really impressed by your courage and skill, and here I just had to subscribe, no doubt.

@jwalster9412

10 ай бұрын

Being someone who dabbles with art in my free time, I envy his patience and creativity. I would not touch wood working with a ten foot pole for several reasons, I've done it in the past before I graduated school, but I don't know if I could do it again.

@haraldpettersen3649

10 ай бұрын

@@jwalster9412 - Each according to their own wishes, and interests, free choice on the top shelf. Have a nice Sunday

Love your work Blake. Fabulous and appreciate your honesty.

“The eyes are the windows to the soul; if your eyes suck then your soul sucks” - artist quote I learned years ago that sticks with me to this day

Wow, I am a fan of your work. Especially love the spirit bear, but this wolf is awesome as well. Ever considered making smaller versions (5 to 10 inches) of these sculptures?

@BMSculptures

Жыл бұрын

I have thought about it, but carving really small ones still takes a tremendous amount of time to do. I like getting more "bang for buck" by doing a large one.

@donnamealy4877

Жыл бұрын

Smaller would probably be as expensive… harder to carve and sand. 😢

Sou do Brasil, amo o canal, sempre fico impressionada com os resultados.

Gotta love the environment and all the good things this does for it. I'm thinking about the snowball effect of all this epoxy being produced and thrown into landfills.

Loved watching the process….and the end result is amazing!!

Awesome results man, it sure was a journey but well worth it. I know you make end grain chopping board from the chunks you cut off but do you ever make anything from any big epoxy chunks that are cut off? Just a thought…

Hey man, first of all I just wanted to tell you that I love your videos. Will there be a video about the sculptures that you built for this year’s Cotton Bowl? They looked amazing and I’d love to see the process of building them. Best regards from Germany👋

I would also like to add that if you invest in a large vacuum chamber it will help with your air bubbles. i noticed the whale had some very small ones. I have been watching people do epoxy projects on youtube for longer than I care to admit and that is one of the best ways I have seen. Working with wood and epoxy, blacktail studios could be another good resource for you. I hope this comment doesn't take away from the fact that you do amazing work!

That yellow wood is stunning! Another beautiful piece!

Mate, glad this video is longer! These videos should be longer given the nature of the awesome work you do. Please consider making them all at least 20 mins. Cheers!

@fanatical56

Жыл бұрын

Ok, this was before I saw all the issues ensue… dang.

@BMSculptures

Жыл бұрын

Thank you!!!

@BMSculptures

Жыл бұрын

😂😂 longer videos = more problems hahah

Yo, I think for the refrigerator the temperature regulation is just for the ambient temperature right? Maybe you need a thermal well and an external thermal control unit to somehow embed it into the deepest section of your pour. Sort of like a fermentation, temperature controller for home brewing beer.

@BMSculptures

Жыл бұрын

I have an internal thermometer that regulates the constant temperature. It maintains exactly what I set it at!

@m.maclellan7147

Жыл бұрын

@BM Sculptures does it check the temp over time ? I wonder if, at the beginning, due to the insulation and the epoxy, there is too much heat & it takes hours to cool down ? Would be interesting to see on a graph.

@The_LaughingHyena

Жыл бұрын

@@BMSculptures Nice, my assumption was due to the viscosity of the epoxy the ambient temperatures weren't penetrating far enough into the middle of the pour allowing the core to get hotter than the exterior. However, if that is what ya got, I'd wager some sort of interaction between the spray foam off gassing is impacting the epoxy somehow. Hope you find a solution, love your body of work.

Everything you do Blake is perfectly complex and incredible, keep up and yessss someone has got to do it and that has got to be only you..

amazing sculpture, the lowes bucket @12:11 was a nice touch 😂

Perhaps you can try pre chilling the epoxy before mixing, this could help to prevent thermal runaway since the epoxy is already cool right after mixing and not having to be cooled down from room temp

Glad you're (mostly) safe, and glad the sculpture wasn't (violently) destroyed. Excellent work my friend! edit: in addition to showcasing your art, this video is an excellent illustration of the value in perseverance and diligence through difficulty! Subscribed!

Respect for for keeping your errors in the video, ill keep them in mind when I mess around in my shop

Another amazing sculpture, just incredible mate, love your work ❤

Loved your dramatic re-inactment of the explosion. Worthy of an Oscar. I’m glad you are ok.

@BM Sculptures Never ever torch the top off the form! You making the top layer react faster so it hardens faster then the rest of the pour. So the rest heat can´t get easiliy out of the pour because your top is already more solid. The bubbels you get out with the torch are on top anyway and most of the time the will disseaper while the Epoxy is reacting.

@BMSculptures

Жыл бұрын

Yikes! But I HATE BUBBLES!

@joensmith5146

Жыл бұрын

@@BMSculptures i would always choose bubbles on the surface which you can cut out over yellow heated epoxy!

@theGhostWolfe

Жыл бұрын

@@BMSculpturesConsidering the amount of cutting and sanding required when shaping the piece, any surface bubbles are going to end up obliterated anyway.

I really love how your videos arnt like alot of other videos that gloss over the carving and creation of something and only show the end product, these are the embodiment of the saying "its not about the destination, its about the journey" which is a massive part of art that alot of KZreadr gloss over and talk about the end piece for 5 minutes. These videos capture the whole process, and show the sculpture at the end with no commentary, which is exactly what people click on these videos for.

seriously the coolest thing I've seen made out of wood and epoxy

The spray foam releases Isocyanate vapors and gases when curing. This could contaminate your epoxy also it is a widely used catalyst and accelerant for urethane production so this could be doing something. Epoxides use oxygen to complete their donut shaped polymer chain ( not sure if polymer chain is the right description) so being in the chest? Got lucky once? One other thing to remember is the shape/ surface area of the form. There may not be enough surface area for the epoxy to gas thus vapor lock. Also the spray foam would insulate that side of the form trapping the heat and cause the epoxy to over cure.

Also just found your chanel tonight. Watched Trex & Bull but must tell you I feel much more hopeful and very encouraged vs being depressed from numerous life issues. Thank you sir ...

Absolutely *PHENOMENAL!* By far my favorite I have seen so far!

This gives me minecraft vibes lol

Dutchman here, showering you with compliments for a job well done!

Yes! You have to take caution each time as you would your first time, but with the knowledge youve obtained with experience for ultimate caution! The brother in law of my bosses daughter was putting fuel (gasoline) on a fire that was going out and they didnt want it to go out. He had done this a thousand times. But this one time, the fire chased the pouring spout of gas back to the comtainer of gas and exploded on him, soaking his clothes in gasoline and catching him on fire. They did all the "roght things" to put the fire out, but his burns were so bad, he died a few weeks later after surgeries and being in the hospital. So sad. He was a young father/husband.

This what makes you a more experienced craftsman. Errors are opportunities for learning.

you really got us where you were advertising the video game and applying the finish to the cutting boards. i could have skipped the advert but it was during the application of the finish, which is my favorite part to watch 😅

burnt hair had you looking like sonic...love your work Brother,,,GOD BLESS YOU N YOUR FAMILY

At 4:24 this is why ya wear protection gear when ya craft, safety is always a first. Glad your ok and very nice art style ya got there, sir.

It was definitely worth all the trials and tribulations... most worthwhile things are... glad you were not seriously injured... and what stunning results..!!! I can hear the call of the wild when I look at it...!!!!

wow you had me there with the re-enactment that I would believe you if you told me that's exactly what happened, especially with the vfx😂😂

The acting was on point, perfect.

Hi Blake, Dang it, been missing out on you’re videos, and I look so forward to watching them. Now I’ve missed out on getting an original Blake Cutting board. Snooze you lose! You went through a lot with this one, but you Aced in the end! Spectacular. It’s alot of work and artistry. You are to hard on yourself. You are so gifted with everything you build. We are blessed to get to see it! Thank you

Least the epoxy gives you some working time mess around and fix stuff that’s nice

I don't do epoxy but have tried some bigger expanding foam forms. The first time I was horrified to find that even after 3-4 hours it had not cured internally, just formed an outer skin. Your initial form had foam, possibly still curing, and melamine walls around most of the pour. Despite being in the fridge it was well insulated with only one small surface to dissipate heat. The second form was thinner material. I suspect more heat could be dissipated through the thinner walls. Great piece.

You must take care Blake, safety 1st and 2nd sharing your amazing talent to people. God bless

Your sculptures are awesome I can’t believe one person has so much talent.

@Wolfwent79

Жыл бұрын

talent and.... practice, practice, practice!

Superb workmanship! This is an amazing project. Congratulations are in order.

Your works are so amazing. Subscriber here from the Philippines. God bless you and continue doing amazing artworks.

I have a suggestion. Add gold foil flakes into your pours. Or a sand blasted sculpture within a polished sculpture

The finish is always so smooth if i saw this in person without knowing how it was made i woule have assumed some kind of factory machine or big mold was involved, like it's too perfect for human hands also the camera slowly showing you spinning the pedestal on your hands and knees is the funniest thing I've seen in a while 😂😂

That is rather beautiful. After the issues you had , all came out good in the end 👍

You know besides that cutting board that would make some amazing wall art you know like a painting on a wall. 📡👽🇺🇸 RUN!!! Who Doesn't love wood.

You never fail to impress. Nicely done!❤❤❤

Finished product is STUNNING. You are a great craftsman.

Your creativity amazes me. Such beautiful pieces. 😍

Gorgeous! The eyes and mouth are perfect (along with the rest of it)!

BEAUTIFUL SCULPTURE !!!!!!!!!!!!!!!!

Oh my gosh! I had friends from Ireland by McFarland. Wonderful people. I guess us Irish have a lot of different talents.☘

That is absolutely beautiful. You got tgere in thevend,well done on nit giving up on yourself. ❤❤🐺🐺

Only your 3rd post I’ve seen, your pieces are VERY impressive, I can’t help but wonder how it would look with an LED tucked into the joint between wood and resin though. Subscribed and starting a binge watch. 👍

I like the fact you do is very relatable.